Realizing simultaneous toughening and reinforcement in polypropylene blends via solid die-drawing

[1]  Yajiang Huang,et al.  Structure evolution and orientation mechanism of isotactic polypropylene during the two‐stage solid die drawing process , 2018 .

[2]  Soojin Park,et al.  Enhancing the heat and load transfer efficiency by optimizing the interface of hexagonal boron nitride/elastomer nanocomposites for thermal management applications , 2018 .

[3]  A. Katbab,et al.  Polylactide (PLA) and acrylonitrile butadiene rubber (NBR) blends: The effect of ACN content on morphology, compatibility and mechanical properties , 2017 .

[4]  Bo Zhu,et al.  Morphology and mechanical properties of PP/POE/nano‐CaCO3 composites , 2016 .

[5]  Changyu Shen,et al.  Fabrication of a polymer/aligned shish-kebab composite: microstructure and mechanical properties , 2015 .

[6]  Jun Hu,et al.  Evaluation of polypropylene/polyolefin elastomer blends for potential recyclable HVDC cable insulation applications , 2015, IEEE Transactions on Dielectrics and Electrical Insulation.

[7]  G. Unnikrishnan,et al.  Selective dispersion of carbon fillers into dynamically vulcanized rubber/plastic blends: a thermodynamic approach to evaluate polymer reinforcement and conductivity enhancement , 2015 .

[8]  Q. Fu,et al.  Simultaneous the thermodynamics favorable compatibility and morphology to achieve excellent comprehensive mechanics in PLA/OBC blend , 2014 .

[9]  Shaoyun Guo,et al.  Unique impact behavior and toughening mechanism of the polypropylene and poly(ethylene-co-octene) alternating multilayered blends with superior toughness , 2014 .

[10]  Hong Liu,et al.  Influence of phase morphology and crystalline structure on the toughness of rubber-toughened isotatic polypropylene blends , 2014 .

[11]  Jia‐Zhuang Xu,et al.  Mechanical properties and biocompatibility of melt processed, self-reinforced ultrahigh molecular weight polyethylene. , 2014, Biomaterials.

[12]  Shaoyun Guo,et al.  Morphological evolution and toughening mechanism of polypropylene and polypropylene/poly(ethylene-co-octene) alternating multilayered materials with enhanced low-temperature toughness , 2014 .

[13]  H. Deng,et al.  Improving impact toughness of polylactide/poly(ether)urethane blends via designing the phase morphology assisted by hydrophilic silica nanoparticles , 2014 .

[14]  Q. Fu,et al.  Hierarchical structure and unique impact behavior of polypropylene/ethylene-octene copolymer blends as obtained via dynamic packing injection molding , 2013 .

[15]  L. Ye,et al.  Simultaneous enhancements of toughness and tensile strength for thermoplastic/elastomer blends through interfacial photocrosslinking with UV radiation , 2013 .

[16]  Ming‐bo Yang,et al.  Largely improved impact toughness of PA6/EPDM-g-MA/HDPE ternary blends: The role of core–shell particles formed in melt processing on preventing micro-crack propagation , 2013 .

[17]  Ming‐bo Yang,et al.  Characterization of PA6/EPDM-g-MA/HDPE ternary blends: The role of core-shell structure , 2012 .

[18]  Ji‐Zhao Liang.  Mechanical Properties and Morphology of Polypropylene/Poly(ethylene-co-octene) Blends , 2012, Journal of Polymers and the Environment.

[19]  József Karger-Kocsis,et al.  Self-reinforced polymeric materials: A review , 2010 .

[20]  Jingwen Chen,et al.  Source apportionment of polycyclic aromatic hy-drocarbons in sediments of the Daliao River, China: Positive matrix factorization and factor analysis with non-negative constraints , 2009, CSB 2009.

[21]  Xie Xiao-lin Zhou Xing-ping Zhou Hua-min Ying Ji-ru,et al.  Dynamic Mechanical Behavior and Prediction for PP/POE Blends , 2009 .

[22]  Xiu-li Wang,et al.  Relationship between Microstructure and Mechanical Properties of Ethylene-Octene Copolymer Reinforced and Toughened PP , 2009 .

[23]  M. Rong,et al.  Phase structure and mechanical properties of ternary polypropylene/elastomer/nano-CaCO3 composites , 2007 .

[24]  Xiaofeng Wang,et al.  Regulation of morphology and mechanical properties of polypropylene/poly(ethylene-co-propylene) in-reactor alloys by multi-stage sequential polymerization , 2007 .

[25]  Xiangfang Peng,et al.  Microcellular foaming of PE/PP blends , 2007 .

[26]  Xiaodong Wang,et al.  Preparation, morphology, and properties of multilamellar barrier materials based on blends of high‐density polyethylene and copolyester , 2006 .

[27]  Y. Chen,et al.  Fracture behaviors of metallocene‐catalyzed polyethylene elastomer via silane crosslinking , 2006 .

[28]  Q. Fu,et al.  Phase morphology and toughening mechanism of polyamide 6/EPDM-g-MA blends obtained via dynamic packing injection molding , 2006 .

[29]  Q. Fu,et al.  Study on the phase structures and toughening mechanism in PP/EPDM/SiO2 ternary composites , 2006 .

[30]  Yuan Hu,et al.  Silane grafting and crosslinking of ethylene–octene copolymer , 2005 .

[31]  K. Sirisinha,et al.  Comparison in processability and mechanical and thermal properties of ethylene–octene copolymer crosslinked by different techniques , 2004 .

[32]  C. García-Franco,et al.  Extent of branching from linear viscoelasticity of long‐chain‐branched polymers , 2004 .

[33]  S. Bai,et al.  Microstructures and mechanical properties of polypropylene/polyamide 6/polyethelene-octene elastomer blends , 2004 .

[34]  M. T. Cidade,et al.  Evolution of morphological and rheological properties along the extruder length for blends of a commercial liquid crystalline polymer and polypropylene , 2004 .

[35]  Jinhai Yang,et al.  Brittle–ductile transition of PP/POE blends in both impact and high speed tensile tests , 2003 .

[36]  Wentao Song,et al.  Effect of interfacial interaction on morphology and mechanical properties of PP/POE/BaSO4 ternary composites , 2003 .

[37]  Chin-San Wu,et al.  Study on Crosslinking of Polyethylene–Octene Elastomer with Dicumyl Peroxide , 2003 .

[38]  K. Premphet,et al.  Polypropylene/metallocene ethylene-octene copolymer blends with a bimodal particle size distribution: Mechanical properties and their controlling factors , 2002 .

[39]  R. E. S. Bretas,et al.  Rheological and thermal properties of binary blends of polypropylene and poly(ethylene‐CO‐1‐octene) , 2001 .

[40]  R. Li,et al.  Study on in situ reinforcing and toughening of a semiflexible thermotropic copolyesteramide in PBT/PA66 blends , 2000 .

[41]  R. J. Gaymans,et al.  Polypropylene–rubber blends: 2. The effect of the rubber content on the deformation and impact behaviour , 1999 .

[42]  R. J. Gaymans,et al.  Polypropylene–rubber blends: 5. Deformation mechanism during fracture , 1999 .

[43]  Horng-Jer Tai,et al.  Molecular structure evolution in peroxide‐initiated crosslinking of an ethylene vinyl acetate copolymer and a metallocene polyolefin elastomer , 1999 .

[44]  D. R. Paul,et al.  Nylon 6 as a modifier for maleated ethylene–propylene elastomers , 1999 .

[45]  D. Jia,et al.  A study on the heat of fusion of β-polypropylene , 1999 .

[46]  S. Wong,et al.  Effect of rubber functionality on microstructures and fracture toughness of impact-modified nylon 6,6/polypropylene blends : 1. Structure -property relationships , 1999 .

[47]  F. Wang,et al.  Effect of morphology on the brittle ductile transition of polymer blends: 1. A new equation for correlating morphological parameters , 1997 .

[48]  A. Dibenedetto,et al.  The mechanical properties of ternary composites of polypropylene with inorganic fillers and elastomer inclusions , 1994, Journal of Materials Science.

[49]  W. R. Cluett,et al.  Modeling of polypropylene degradation during reactive extrusion with implications for process control , 1994 .

[50]  R. Muller,et al.  Linear viscoelastic behavior of some incompatible polymer blends in the melt. Interpretation of data with a model of emulsion of viscoelastic liquids , 1993 .

[51]  S. Picken,et al.  Structure and rheology of aramid solutions: x-ray scattering measurements , 1990 .

[52]  C. Tzoganakis,et al.  Measurements of residence time distribution for the peroxide degradation of polypropylene in a single‐screw plasticating extruder , 1989 .

[53]  D. Suwanda,et al.  Reactive extrusion of polypropylene II: Degradation kinetic modeling , 1988 .

[54]  J. Stamhuis.  Mechanical properties and morphology of polypropylene composites II. Effect of polar components in talc‐filled polypropylene , 1988 .

[55]  S. De,et al.  Effect of cryo‐ground rubber on melt flow and mechanical properties of polypropylene , 1986 .

[56]  D. Uhlmann,et al.  The rubber particle size dependence of crazing in polypropylene , 1985 .

[57]  H. Essabir,et al.  Fracture study of the composite using essential work of fracture method: PP–SEBS–g–MA/E1 clay , 2014 .

[58]  Q. Fu,et al.  Brittle-ductile transition and toughening mechanism in POM/TPU/CaCO3 ternary composites , 2004 .

[59]  R. Li,et al.  An investigation on the impact fracture characteristics of EPR toughened polypropylene , 1996 .

[60]  F. M. B. Coutinho,et al.  Some properties of polymer blends based on EPDM/PP , 1996 .

[61]  A. Bhowmick,et al.  Thermoplastic elastomers from rubber-plastic blends , 1990 .