Finite element modeling of tube hydroforming of polycrystalline aluminum alloy extrusions

[1]  Yanyao Jiang,et al.  An experimental study of inhomogeneous cyclic plastic deformation of 1045 steel under multiaxial cyclic loading , 2005 .

[2]  Yeong-Maw Hwang,et al.  Analysis of tube hydroforming in a square cross-sectional die , 2005 .

[3]  K. Inal,et al.  Forming limit comparisons for FCC and BCC sheets , 2005 .

[4]  Larsgunnar Nilsson,et al.  On constitutive modeling of aluminum alloys for tube hydroforming applications , 2005 .

[5]  R. Feng,et al.  Simulation of microplasticity-induced deformation in uniaxially strained ceramics by 3-D Voronoi polycrystal modeling , 2005 .

[6]  Georges Cailletaud,et al.  Evaluation of finite element based analysis of 3D multicrystalline aggregates plasticity: Application to crystal plasticity model identification and the study of stress and strain fields near grain boundaries , 2005 .

[7]  Yanyao Jiang,et al.  Lüders bands propagation of 1045 steel under multiaxial stress state , 2005 .

[8]  Paul Van Houtte,et al.  Deformation texture prediction: from the Taylor model to the advanced Lamel model , 2005 .

[9]  Mgd Marc Geers,et al.  An adaptive simulation approach designed for tube hydroforming processes , 2005 .

[10]  W. Hutchinson,et al.  Grain boundary area and deformation , 2005 .

[11]  A. Abdul-Latif,et al.  Cyclic plasticity modeling with the distribution of non-linear relaxations approach , 2005 .

[12]  Lallit Anand,et al.  Single-crystal elasto-viscoplasticity: application to texture evolution in polycrystalline metals at large strains , 2004 .

[13]  Thomas B. Stoughton,et al.  An experimental and numerical study of necking initiation in aluminium alloy tubes during hydroforming , 2004 .

[14]  Z. Zhao,et al.  A study of surface roughening in fcc metals using direct numerical simulation , 2004 .

[15]  B. Radhakrishnan,et al.  Modeling microstructural effects on the evolution of cube texture during hot deformation of aluminum , 2004 .

[16]  Sang-Moon Hwang,et al.  Numerical prediction of bursting failure in tube hydroforming by the FEM considering plastic anisotropy , 2004 .

[17]  B. J. Mac Donald,et al.  Determination of the optimal load path for tube hydroforming processes using a fuzzy load control algorithm and finite element analysis , 2004 .

[18]  B. Kang,et al.  Analytical Approach to Bursting Failure Prediction in Tube Hydroforming Based On Plastic Instability , 2004 .

[19]  Pete S. Bate,et al.  Texture development in the cold rolling of IF steel , 2004 .

[20]  K. Inal,et al.  Crystal plasticity simulation of the hydrostatic bulge test , 2004 .

[21]  F. Barlat,et al.  On precipitate induced hardening in crystal plasticity: algorithms and simulations , 2004 .

[22]  Mehdi Imaninejad,et al.  Influence of end-conditions during tube hydroforming of aluminum extrusions , 2004 .

[23]  Laurent Duchene,et al.  Anisotropic elasto-plastic finite element analysis using a stress-strain interpolation method based on a polycrystalline model , 2004 .

[24]  H. Wenk,et al.  Texture and Anisotropy , 2004 .

[25]  Abhishek Bhattacharyya,et al.  Detailed analyses of grain–scale plastic deformation in columnar polycrystalline aluminium using orientation image mapping and crystal plasticity models , 2004, Proceedings of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences.

[26]  Hiroshi Utsunomiya,et al.  Three-dimensional topography of the matt surface in aluminium pack rolling , 2004 .

[27]  Akitake Makinouchi,et al.  Investigation of factors which cause breakage during the hydroforming of an automotive part , 2004 .

[28]  C. T. Kwan,et al.  Application of abductive network and FEM to predict an acceptable product on T-shape tube hydroforming process , 2004 .

[29]  Ba Nghiep Nguyen,et al.  A Numerical Process Control Method for Circular-Tube Hydroforming Prediction , 2004 .

[30]  O. Colak,et al.  Modeling of the monotonic and cyclic Swift effects using an isotropic, finite viscoplasticity theory based on overstress (FVBO) , 2004 .

[31]  Kengo Yoshida,et al.  Anisotropic plastic deformation of extruded aluminum alloy tube under axial forces and internal pressure , 2004 .

[32]  Zhuang Fu,et al.  A study on numerical simulation of hydroforming of aluminum alloy tube , 2004 .

[33]  R. H. Wagoner,et al.  On precipitate induced hardening in crystal plasticity: theory , 2004 .

[34]  Dierk Raabe,et al.  Using texture components in crystal plasticity finite element simulations , 2004 .

[35]  Weimin Mao,et al.  A texture optimization study for minimum earing in aluminium by use of a texture component crystal plasticity finite element method , 2004 .

[36]  Taylan Altan,et al.  Optimizing tube hydroforming using process simulation and experimental verification , 2004 .

[37]  Yeong-Maw Hwang,et al.  Process fusion: Tube hydroforming and crushing in a square die , 2004 .

[38]  Akitake Makinouchi,et al.  Simulation of hammering hydroforming by static explicit FEM , 2004 .

[39]  C. Miehe,et al.  Anisotropic finite elastoplastic analysis of shells: simulation of earing in deep-drawing of single- and polycrystalline sheets by Taylor-type micro-to-macro transitions , 2004 .

[40]  Quang-Cherng Hsu,et al.  Theoretical and experimental study on the hydroforming of bifurcation tube , 2003 .

[41]  Kenneth W. Neale,et al.  Effects of texture gradients and strain paths on localization phenomena in polycrystals , 2003 .

[42]  Kuang-Jau Fann,et al.  Optimization of loading conditions for tube hydroforming , 2003 .

[43]  Taylan Altan,et al.  Finite element analysis of tube hydroforming processes in a rectangular die , 2003 .

[44]  Soo-Ik Oh,et al.  Finite element analysis of grain-by-grain deformation by crystal plasticity with couple stress , 2003 .

[45]  Beom-Soo Kang,et al.  A prediction of bursting failure in tube hydroforming processes based on ductile fracture criterion , 2003 .

[46]  Sadakatsu Fuchizawa,et al.  Analysis of hydrostatic tube bulging with cylindrical die using static explicit FEM , 2003 .

[47]  Albert Van Bael,et al.  Finite element modeling of plastic anisotropy induced by texture and strain-path change , 2003 .

[48]  D. Lloyd,et al.  Analysis of roping in AA6111 automotive sheet , 2003 .

[49]  S. R. MacEwen,et al.  Advances in sheet metal forming analyses: dealing with mechanical anisotropy from crystallographic texture , 2003 .

[50]  Thomas Edward Buchheit,et al.  Investigating the limits of polycrystal plasticity modeling , 2003 .

[51]  E. Nakamachi,et al.  Formability assessment of FCC aluminum alloy sheet by using elastic/crystalline viscoplastic finite element analysis , 2002 .

[52]  D. Tortorelli,et al.  A polycrystal plasticity model based on the mechanical threshold , 2002 .

[53]  Georges Cailletaud,et al.  Distribution of normal stress at grain boundaries in multicrystals: application to an intergranular damage modeling , 2002 .

[54]  Z. Zhao,et al.  Application of the Texture Component Crystal Plasticity finite element method for deep drawing simulations: A comparison with Hill's yield criterion , 2002 .

[55]  Mica Grujicic,et al.  Crystal plasticity analysis of earing in deep-drawn OFHC copper cups , 2002 .

[56]  Y. Chastel,et al.  Forming limits prediction using rate-independent polycrystalline plasticity , 2002 .

[57]  D. Besdo,et al.  The Influence of Large Torsional Prestrain on the Texture Development and Yield Surfaces of Polycrystals , 2001 .

[58]  Ming Dao,et al.  A micromechanics study on strain-localization-induced fracture initiation in bending using crystal plasticity models , 2001 .

[59]  B. Peeters,et al.  Assessment of crystal plasticity based calculation of the lattice spin of polycrystalline metals for FE implementation , 2001 .

[60]  Abhishek Bhattacharyya,et al.  Evolution of grain-scale microstructure during large strain simple compression of polycrystalline aluminum with quasi-columnar grains: OIM measurements and numerical simulations , 2001 .

[61]  Nader Asnafi,et al.  Theoretical and experimental analysis of stroke-controlled tube hydroforming , 2000 .

[62]  David J. Meuleman,et al.  Analytical and Experimental Examination of Tubular Hydroforming Limits , 1998 .

[63]  T. M. Srinivasan,et al.  Tubular Hydroforming: Correlation of Experimental and Simulation Results , 1998 .

[64]  L. Anand,et al.  A computational procedure for rate-independent crystal plasticity , 1996 .

[65]  Ricardo A. Lebensohn,et al.  A self-consistent anisotropic approach for the simulation of plastic deformation and texture development of polycrystals : application to zirconium alloys , 1993 .

[66]  R. Becker,et al.  Analysis of texture evolution in channel die compression. I, Effects of grain interaction , 1991 .

[67]  S. Ahzi,et al.  A self consistent approach of the large deformation polycrystal viscoplasticity , 1987 .

[68]  R. Asaro,et al.  Overview no. 42 Texture development and strain hardening in rate dependent polycrystals , 1985 .

[69]  James R. Rice,et al.  Strain localization in ductile single crystals , 1977 .

[70]  J. Rice,et al.  Constitutive analysis of elastic-plastic crystals at arbitrary strain , 1972 .

[71]  J. Rice.  Inelastic constitutive relations for solids: An internal-variable theory and its application to metal plasticity , 1971 .

[72]  R. Hill.  Generalized constitutive relations for incremental deformation of metal crystals by multislip , 1966 .

[73]  B. Li,et al.  A parallel macro/micro elastoplasticity model for aluminum deformation and comparison with experiments , 2005 .

[74]  Wiktor Gambin,et al.  Model of plastic anisotropy evolution with texture-dependent yield surface , 2004 .

[75]  R. Kopp,et al.  Through-process texture modelling of aluminium alloys , 2004 .

[76]  Elisabeth Massoni,et al.  Rate-independent crystalline and polycrystalline plasticity, application to FCC materials , 2000 .

[77]  F. Barlat,et al.  Modeling of deformation texture development based on rate independent crystal plasticity , 1997 .

[78]  G. C. Johnson,et al.  Three-dimensional deformation process simulation with explicit use of polycrystal plasticity models , 1993 .

[79]  W. Gambin.  Refined analysis of elastic-plastic crystals , 1992 .

[80]  L. Anand,et al.  Crystallographic texture evolution in bulk deformation processing of FCC metals , 1992 .

[81]  M. Arminjon.  A Regular Form of the Schmid Law. Application to the Ambiguity Problem , 1991 .

[82]  R. Asaro,et al.  Micromechanics of Crystals and Polycrystals , 1983 .