Deposition of extracellular polymeric substances (EPS) and microtopographical changes on membrane surfaces during intermittent filtration conditions

Extracellular polymeric substances (EPS) play a significant role in modifying surface characteristics, eventually creating conditions suitable for bacterial attachment. The purpose of this study was to investigate the fouling potential of the EPS present in the effluent of an aerobic membrane bioreactor during intermittent filtration conditions. The aerobic rotational membrane system (ARMS) is a novel compact reactor which is designed to convert ammonia nitrogen in concentrated wastewater to nitrates with high conversion rates. The effluent from the reactor contains significant amounts of dissolved substrates which include EPS produced by the biofilm and salts. A series of cross-flow filtration tests were conducted with intermittent once a day short filtration periods using SEPA CFII membrane test cell and an RO membrane. The intermittent tests runs were conducted for overall filter use times of 1, 2, 4, and 6 days. Progression of the microtopographical changes, amount of EPS accumulation, and flux characteristics were evaluated. The images taken by atomic force microscopy (AFM) showed a layer of soft deposits forming over a strong sublayer firmly covering the membrane surface within a short time. The sublayer consisted of distinct modular units which were firmly attached to each other and to the membrane surface. The amount of EPS deposited on the membranes increased with use time and the membranes became significantly hydrophilic. The membrane flux declined gradually after each daily intermission until the 5th ± 1 day, then a small increase in flux was observed. The flux increase may be due to dislodging of some of the deposited material from the membrane surface due to shearing during cross-flow filtration conditions.

[1]  Huajian Gao,et al.  Shape insensitive optimal adhesion of nanoscale fibrillar structures. , 2004, Proceedings of the National Academy of Sciences of the United States of America.

[2]  C. Vandecasteele,et al.  Roughness and hydrophobicity studies of nanofiltration membranes using different modes of AFM. , 2005, Journal of colloid and interface science.

[3]  Vicki Chen,et al.  Evolution of fouling during crossflow filtration of model EPS solutions , 2005 .

[4]  Yan Jing,et al.  Membrane fouling during filtration of milk––a microstructural study , 2003 .

[5]  R. Wotton.  The ubiquity and many roles of exopolymers (EPS) in aquatic systems , 2004 .

[6]  Jost Wingender,et al.  Influence of extracellular polymeric substances on deposition and redeposition of Pseudomonas aeruginosa to surfaces. , 2002, Microbiology.

[7]  K. Keiding,et al.  Physico-chemical characteristics of full scale sewage sludges with implications to dewatering. , 2002, Water research.

[8]  T. Neu,et al.  Bacterial Polymers: Physicochemical Aspects of Their Interactions at Interfaces , 1990, Journal of biomaterials applications.

[9]  Lu Yan,et al.  EFFECT OF NANO SIZED AL2O3-PARTICLE ADDITION ON PVDF ULTRAFILTRATION MEMBRANE PERFORMANCE , 2006 .

[10]  T. Chow.  LETTER TO THE EDITOR: Size-dependent adhesion of nanoparticles on rough substrates , 2003 .

[11]  Peter X Ma,et al.  Nano-fibrous poly(L-lactic acid) scaffolds with interconnected spherical macropores. , 2004, Biomaterials.

[12]  Jost Wingender,et al.  What are Bacterial Extracellular Polymeric Substances , 1999 .

[13]  B. Van der Bruggen,et al.  Study of the characteristics and the performance of self-made nanoporous polyethersulfone membranes , 2006 .

[14]  Jay L. Garland,et al.  Design and Preliminary Evaluation of a Novel Gravity Independent Rotating Biological Membrane Reactor , 2004 .

[15]  E. Bouwer,et al.  Bacterial Adhesion under Static and Dynamic Conditions , 1993, Applied and environmental microbiology.

[16]  P. Suci,et al.  Adhesive extracellular polymers of hyphomonas mhs-3: interaction of polysaccharides and proteins , 1995 .

[17]  Amy E. Childress,et al.  Colloidal adhesion to hydrophilic membrane surfaces , 2004 .

[18]  Jaeweon Cho,et al.  Biofouling potential of various NF membranes with respect to bacteria and their soluble microbial products (SMP): Characterizations, flux decline, and transport parameters , 2005 .

[19]  A. E. Greenberg,et al.  Standard methods for the examination of water and wastewater : supplement to the sixteenth edition , 1988 .

[20]  S. Tsuneda,et al.  Extracellular polymeric substances responsible for bacterial adhesion onto solid surface. , 2003, FEMS microbiology letters.

[21]  Vicki Chen,et al.  Fouling mechanisms of alginate solutions as model extracellular polymeric substances , 2005 .

[22]  Jost Wingender,et al.  Microbial Extracellular Polymeric Substances , 1999, Springer Berlin Heidelberg.

[23]  Berrin Tansel,et al.  Integrated evaluation of a sequential membrane filtration system for recovery of bioreactor effluent during long space missions , 2005 .