A technical review on gas diffusion, mechanism and medium of PEM fuel cell

[1]  M. Mench,et al.  Direct measurement of through-plane thermal conductivity of partially saturated fuel cell diffusion media , 2014 .

[2]  K. S. Dhathathreyan,et al.  Influence of compressive stress on the pore structure of carbon cloth based gas diffusion layer investigated by capillary flow porometry , 2014 .

[3]  Kyoungdoug Min,et al.  Effect of the micro porous layer design on the dynamic performance of a proton exchange membrane fuel cell , 2014 .

[4]  Kyoungdoug Min,et al.  Analysis of the transient response and durability characteristics of a proton exchange membrane fuel cell with different micro-porous layer penetration thicknesses , 2013 .

[5]  P. Kauranen,et al.  Durability of carbon nanofiber (CNF) & carbon nanotube (CNT) as catalyst support for Proton Exchange Membrane Fuel Cells , 2013 .

[6]  Jun Ni,et al.  Investigation of sintered stainless steel fiber felt as gas diffusion layer in proton exchange membrane fuel cells , 2012 .

[7]  S. Shimpalee,et al.  Effect of microporous layer on MacMullin number of carbon paper gas diffusion layer , 2012 .

[8]  G. Dotelli,et al.  Effect of rheology controller agent addition to Micro-Porous Layers on PEMFC performances , 2012 .

[9]  J. S. Ellis,et al.  Heterogeneous through-plane distributions of polytetrafluoroethylene in polymer electrolyte membrane fuel cell gas diffusion layers , 2012 .

[10]  Giovanni Dotelli,et al.  Investigation of gas diffusion layer compression by electrochemical impedance spectroscopy on runnin , 2011 .

[11]  P. Rama,et al.  Determination of the anisotropic permeability of a carbon cloth gas diffusion layer through X‐ray computer micro‐tomography and single‐phase lattice Boltzmann simulation , 2011 .

[12]  L. Jia,et al.  A study on the transport process in gas diffusion layer of proton exchange membrane fuel cells , 2011 .

[13]  A. Mohamad,et al.  Review of Parameters Affecting Performance of (Pt/C) Electrode for Proton Exchange Membrane Fuel Cells (Pemfcs) , 2011 .

[14]  J. Arunkumar,et al.  Preparation of durable nanocatalyzed MEA for PEM fuel cell applications , 2011 .

[15]  Jun Ni,et al.  A Numerical Model for Predicting Gas Diffusion Layer Failure in Proton Exchange Membrane Fuel Cells , 2011 .

[16]  Branko N. Popov,et al.  Effect of a GDL based on carbon paper or carbon cloth on PEM fuel cell performance , 2011 .

[17]  J. Yablecki,et al.  Modeling the Effective Thermal Conductivity of an Anisotropic Gas Diffusion Layer in a Polymer Electrolyte Membrane Fuel Cell , 2011 .

[18]  N. Djilali,et al.  Effective thermal conductivity and thermal contact resistance of gas diffusion layers in proton exchange membrane fuel cells. Part 1: Effect of compressive load , 2011 .

[19]  A. Tamayol,et al.  In-plane gas permeability of proton exchange membrane fuel cell gas diffusion layers , 2011 .

[20]  Werner Lehnert,et al.  Diffusion media materials and characterisation , 2010 .

[21]  Z. Fishman,et al.  Microscale Tomography Investigations of Heterogeneous Porosity Distributions of PEMFC GDLs , 2010 .

[22]  S. Kandlikar,et al.  Effective Thermal Conductivity of Gas Diffusion Layers Used in PEMFC: Measured with Guarded-Hot-Plate Method and Predicted by a Fractal Model , 2010 .

[23]  M. Zhang,et al.  Improved properties of carbon fiber paper as electrode for fuel cell by coating pyrocarbon via CVD method , 2010 .

[24]  Y. B. Kim,et al.  Time delay control for fuel cells with bidirectional DC/DC converter and battery , 2010 .

[25]  Chao-Yang Wang,et al.  Measurement of relative permeability of fuel cell diffusion media , 2010 .

[26]  Toshiaki Konomi,et al.  Microporous layer coated gas diffusion layers for enhanced performance of polymer electrolyte fuel cells , 2010 .

[27]  V. Gurau,et al.  Effect of Interfacial Phenomena at the Gas Diffusion Layer-Channel Interface on the Water Evolution in a PEMFC , 2010 .

[28]  Chung-Jen Tseng,et al.  Effects of microstructure characteristics of gas diffusion layer and microporous layer on the performance of PEMFC , 2010 .

[29]  张敏,et al.  Improved properties of carbon fiber paper as electrode for fuel cell by coating pyrocarbon via CVD method , 2010 .

[30]  G. Dotelli,et al.  Electrical Performance of PEM Fuel Cells With Different Gas Diffusion Layers , 2011 .

[31]  Huamin Zhang,et al.  Electrochemical durability of gas diffusion layer under simulated proton exchange membrane fuel cell conditions , 2009 .

[32]  Takemi Chikahisa,et al.  Numerical simulation of liquid water and gas flow in a channel and a simplified gas diffusion layer model of polymer electrolyte membrane fuel cells using the lattice Boltzmann method , 2009 .

[33]  W. Lehnert,et al.  Characterization of water transport in gas diffusion media , 2009 .

[34]  C. Du,et al.  Hierarchy carbon paper for the gas diffusion layer of proton exchange membrane fuel cells , 2009 .

[35]  林智汶.  Gas Diffusion Layer for Proton Exchange Membrane Fuel Cells - a Review , 2009 .

[36]  D. Wood,et al.  Durability Aspects of Gas-Diffusion and Microporous Layers , 2009 .

[37]  Afzal Suleman,et al.  Optimization of a proton exchange membrane fuel cell membrane electrode assembly , 2009 .

[38]  F. Büchi,et al.  Polymer electrolyte fuel cell durability , 2009 .

[39]  S. Pitchumani,et al.  Polymer electrolyte fuel cells employing electrodes with gas-diffusion layers of mesoporous carbon derived from a sol–gel route , 2009 .

[40]  Mark E. Orazem,et al.  On Selection of the Perturbation Amplitude Required to Avoid Nonlinear Effects in Impedance Measurements , 2008 .

[41]  Olli Himanen,et al.  Modelling the Effect of Inhomogeneous Compression of GDL on Local Transport Phenomena in a PEM Fuel Cell , 2008 .

[42]  Jun Shen,et al.  A review of PEM fuel cell durability: Degradation mechanisms and mitigation strategies , 2008 .

[43]  Y. Chen-Yang,et al.  Highly efficient single-layer gas diffusion layers for the proton exchange membrane fuel cell , 2008 .

[44]  A. Bottino,et al.  Effect of preparative parameters on the characteristic of poly(vinylidene fluoride)-based microporous layer for proton exchange membrane fuel cells , 2008 .

[45]  P. Sui,et al.  A numerical investigation of the effects of compression force on PEM fuel cell performance , 2008 .

[46]  B. Yi,et al.  Facilitating mass transport in gas diffusion layer of PEMFC by fabricating micro-porous layer with dry layer preparation , 2008 .

[47]  Tse-Hao Ko,et al.  Performance of a Polymer Electrolyte Membrane Fuel Cell with Fabricated Carbon Fiber Cloth Electrode , 2008 .

[48]  Hyung Jin Sung,et al.  Effect of GDL permeability on water and thermal management in PEMFCs - I. Isotropic and anisotropic permeability , 2008 .

[49]  Adam Z. Weber,et al.  Modeling and High-Resolution-Imaging Studies of Water-Content Profiles in a Polymer-Electrolyte-Fuel-Cell Membrane-Electrode Assembly , 2008 .

[50]  Colleen Spiegel,et al.  PEM Fuel Cell Modeling and Simulation Using Matlab , 2008 .

[51]  J. Adin Mann,et al.  Two-Phase Transport in PEM Fuel Cell Cathodes , 2008 .

[52]  J. Banhart,et al.  Cross-sectional insight in the water evolution and transport in polymer electrolyte fuel cells , 2008 .

[53]  Jiujun Zhang,et al.  A review of water flooding issues in the proton exchange membrane fuel cell , 2008 .

[54]  A. Shukla,et al.  Effect of diffusion-layer porosity on the performance of polymer electrolyte fuel cells , 2008 .

[55]  Jong-Won Lee,et al.  Effect of PTFE content in microporous layer on water management in PEM fuel cells , 2008 .

[56]  Suresh G. Advani,et al.  Performance of a metallic gas diffusion layer for PEM fuel cells , 2008 .

[57]  Wei-Mon Yan,et al.  Effects of fabrication processes and material parameters of GDL on cell performance of PEM fuel cell , 2007 .

[58]  Kazuhiko Suga,et al.  An investigation of water-gas transport processes in the gas-diffusion-layer of a PEM fuel cell by a multiphase multiple-relaxation-time lattice Boltzmann model , 2007 .

[59]  Tatsumi Kitahara,et al.  Direct water balance analysis on a polymer electrolyte fuel cell (PEFC): Effects of hydrophobic treatment and micro-porous layer addition to the gas diffusion layer of a PEFC on its performance during a simulated start-up operation , 2007 .

[60]  Sirivatch Shimpalee,et al.  Analysis of GDL flooding effects on PEMFC performance , 2007 .

[61]  K. S. Dhathathreyan,et al.  Effect of PTFE Content in Gas Diffusion Media and Microlayer on the Performance of PEMFC Tested under Ambient Pressure , 2007 .

[62]  Fang Wang,et al.  A degradation study of Nafion proton exchange membrane of PEM fuel cells , 2007 .

[63]  Chengwei Wu,et al.  Numerical study on the compression effect of gas diffusion layer on PEMFC performance , 2007 .

[64]  Mu Pan,et al.  Porosity-graded micro-porous layers for polymer electrolyte membrane fuel cells , 2007 .

[65]  J. H. Rohling,et al.  Determination of binary diffusion coefficients of gases using photothermal deflection technique , 2007 .

[66]  J. Adin Mann,et al.  Characterization of transport properties in gas diffusion layers for proton exchange membrane fuel cells: 2. Absolute permeability , 2007 .

[67]  Chaoyang Wang,et al.  Elucidating differences between carbon paper and carbon cloth in polymer electrolyte fuel cells , 2007 .

[68]  Jon G. Pharoah,et al.  An Experimental Investigation of Water Transport in PEMFCs The Role of Microporous Layers , 2007 .

[69]  Walter Mérida,et al.  Gas diffusion layer durability under steady-state and freezing conditions , 2007 .

[70]  Won-Yong Lee,et al.  Adoption of nano-materials for the micro-layer in gas diffusion layers of PEMFCs , 2006 .

[71]  B. Popov,et al.  Effect of carbon loading in microporous layer on PEM fuel cell performance , 2006 .

[72]  Suresh G. Advani,et al.  Experimental characterization of in-plane permeability of gas diffusion layers , 2006 .

[73]  Chaoyang Wang,et al.  Optimization of cathode catalyst layer for direct methanol fuel cells Part II: Computational modeling and design , 2006 .

[74]  Jianlu Zhang,et al.  A bi-functional micro-porous layer with composite carbon black for PEM fuel cells , 2006 .

[75]  M. Fowler,et al.  In-plane and through-plane gas permeability of carbon fiber electrode backing layers , 2006 .

[76]  Zuomin Dong,et al.  Optimization of a PEM fuel cell system based on empirical data and a generalized electrochemical semi-empirical model , 2006 .

[77]  M. Mench,et al.  Direct measurement of through-plane thermal conductivity and contact resistance in fuel cell materials , 2006 .

[78]  T. Koido,et al.  Two-phase Transport Properties and Transport Simulation of the Gas Diffusion Layer of a PEFC , 2006 .

[79]  K. Neyerlin,et al.  The Use of Limiting Current to Determine Transport Resistance in PEM Fuel Cells , 2006 .

[80]  Jon G. Pharoah,et al.  On effective transport coefficients in PEM fuel cell electrodes: Anisotropy of the porous transport layers , 2006 .

[81]  Hsin-Fu Huang,et al.  CF4 plasma treatment for preparing gas diffusion layers in membrane electrode assemblies , 2006 .

[82]  J. Adin Mann,et al.  Characterization of transport properties in gas diffusion layers for proton exchange membrane fuel cells: 1. Wettability (internal contact angle to water and surface energy of GDL fibers) , 2006 .

[83]  Hsin-Sen Chu,et al.  Numerical investigation of transport component design effect on a proton exchange membrane fuel cell , 2006 .

[84]  M. Han,et al.  Development of carbon-filled gas diffusion layer for polymer electrolyte fuel cells , 2006 .

[85]  K. Okazaki,et al.  Micromachined Metallic Thin Films for the Gas Diffusion Layer of PEFCs , 2006 .

[86]  Jiujun Zhang,et al.  Micro-porous layer with composite carbon black for PEM fuel cells , 2006 .

[87]  Chao-Yang Wang,et al.  A Nonisothermal, Two-Phase Model for Polymer Electrolyte Fuel Cells , 2006 .

[88]  A. Morin,et al.  Characterization of PEMFCs gas diffusion layers properties , 2006 .

[89]  A. Kannan,et al.  Gas diffusion layer using a new type of graphitized nano-carbon PUREBLACK® for proton exchange membrane fuel cells , 2006 .

[90]  A. A. Wragg,et al.  Numerical optimization of bipolar plates and gas diffusion layers for PEM fuel cells , 2006 .

[91]  Trung Van Nguyen,et al.  A Two-Dimensional Two-Phase Model of a PEM Fuel Cell , 2006 .

[92]  C. Hebling,et al.  Hydrophilicity and hydrophobicity study of catalyst layers in proton exchange membrane fuel cells , 2006 .

[93]  Effect of Fluoroalkylsilane Coating on the Preperties of Gas Diffusion Layer in PEMFCs , 2006 .

[94]  Yann Bultel,et al.  Investigation of mass transport in gas diffusion layer at the air cathode of a PEMFC , 2005 .

[95]  Trung Van Nguyen,et al.  Effect of Thickness and Hydrophobic Polymer Content of the Gas Diffusion Layer on Electrode Flooding Level in a PEMFC , 2005 .

[96]  David Blackwell,et al.  Water flow in the gas diffusion layer of PEM fuel cells , 2005 .

[97]  Vijay Modi,et al.  Micromachined silicon structures for free-convection PEM fuel cells , 2005 .

[98]  Chao-Yang Wang,et al.  Model of Two-Phase Flow and Flooding Dynamics in Polymer Electrolyte Fuel Cells , 2005 .

[99]  Ramin Roshandel,et al.  The effects of porosity distribution variation on PEM fuel cell performance , 2005 .

[100]  Adam Z. Weber,et al.  Effects of Microporous Layers in Polymer Electrolyte Fuel Cells , 2005 .

[101]  Yu Wei,et al.  Improvement in high temperature proton exchange membrane fuel cells cathode performance with ammonium carbonate , 2005 .

[102]  Chaoyang Wang,et al.  Two-Phase Modeling and Flooding Prediction of Polymer Electrolyte Fuel Cells , 2005 .

[103]  K. S. Dhathathreyan,et al.  Characterisation and Optimisation of Low Cost Activated Carbon Fabric as a Substrate Layer for PEMFC Electrodes , 2005 .

[104]  Chao-Yang Wang,et al.  Fundamental Models for Fuel Cell Engineering , 2004 .

[105]  Chao-Yang Wang,et al.  Two-phase transport and the role of micro-porous layer in polymer electrolyte fuel cells , 2004 .

[106]  Chao-Yang Wang,et al.  Effects of hydrophobic polymer content in GDL on power performance of a PEM fuel cell , 2004 .

[107]  Göran Lindbergh,et al.  Flooding of Gas Diffusion Backing in PEFCs Physical and Electrochemical Characterization , 2004 .

[108]  EunAe Cho,et al.  Influence of cathode gas diffusion media on the performance of the PEMFCs , 2004 .

[109]  M. Hori,et al.  Novel gas diffusion layer with water management function for PEMFC , 2004 .

[110]  Tae-Hee Lee,et al.  A study on the characteristics of the diffusion layer thickness and porosity of the PEMFC , 2004 .

[111]  Chang-Soo Kim,et al.  Effect of PTFE contents in the gas diffusion media on the performance of PEMFC , 2004 .

[112]  Chao-Yang Wang,et al.  Liquid Water Transport in Gas Diffusion Layer of Polymer Electrolyte Fuel Cells , 2004 .

[113]  Chaoyang Wang,et al.  Three-dimensional analysis of transport and electrochemical reactions in polymer electrolyte fuel cells , 2004 .

[114]  B. Thoben,et al.  Influence of Different Gas Diffusion Layers on the Water Management of the PEFC Cathode , 2004 .

[115]  Ned Djilali,et al.  A 3D, Multiphase, Multicomponent Model of the Cathode and Anode of a PEM Fuel Cell , 2003 .

[116]  Jin Hyun Nam,et al.  Effective diffusivity and water-saturation distribution in single- and two-layer PEMFC diffusion medium , 2003 .

[117]  Comparison of Electrode Backing Materials for Polymer Electrolyte Membrane Fuel Cells , 2003 .

[118]  P. Lund,et al.  Titanium sinter as gas diffusion backing in PEMFC , 2003 .

[119]  Bill Diong,et al.  An improved small-signal model of the dynamic behavior of PEM fuel cells , 2003, 38th IAS Annual Meeting on Conference Record of the Industry Applications Conference, 2003..

[120]  W. Lehnert,et al.  Chapter 46 Diffusion media materials and characterisation , 2003 .

[121]  James M. Fenton,et al.  Characterization of Gas Diffusion Layers for PEMFC , 2004 .

[122]  D. Sholl,et al.  Rapid transport of gases in carbon nanotubes. , 2002, Physical review letters.

[123]  E. Ticianelli,et al.  Effects of the carbon powder characteristics in the cathode gas diffusion layer on the performance of polymer electrolyte fuel cells , 2002 .

[124]  Zhigang Qi,et al.  Improvement of water management by a microporous sublayer for PEM fuel cells , 2002 .

[125]  Tae-Hee Lee,et al.  Influence of pore-size distribution of diffusion layer on mass-transport problems of proton exchange membrane fuel cells , 2002 .

[126]  Ned Djilali,et al.  THREE-DIMENSIONAL COMPUTATIONAL ANALYSIS OF TRANSPORT PHENOMENA IN A PEM FUEL CELL , 2002 .

[127]  A. Shukla,et al.  Effect of Diffusion-Layer Morphology on the Performance of Solid-Polymer-Electrolyte Direct Methanol Fuel Cells , 2002 .

[128]  N. Djilali,et al.  Influence of heat transfer on gas and water transport in fuel cells , 2002 .

[129]  G.J.M. Janssen,et al.  Water transport in the proton-exchange-membrane fuel cell: measurements of the effective drag coefficient , 2001 .

[130]  J. Fricke,et al.  Integration of carbon aerogels in PEM fuel cells , 2001 .

[131]  G. Squadrito,et al.  Effects of the Diffusion Layer Characteristics on the Performance of Polymer Electrolyte Fuel Cell Electrodes , 2001 .

[132]  J. Fricke,et al.  Carbon Cloth Reinforced Carbon Aerogel Films Derived from Resorcinol Formaldehyde , 2001 .

[133]  J. Song,et al.  Optimal composition of polymer electrolyte fuel cell electrodes determined by the AC impedance method , 2001 .

[134]  Shimshon Gottesfeld,et al.  Electro-osmotic Drag of Water in Poly(perfluorosulfonic acid) Membranes , 2001 .

[135]  Z. H. Wang,et al.  Two-phase flow and transport in the air cathode of proton exchange membrane fuel cells , 2000 .

[136]  W. Kast,et al.  Mass transfer within the gas-phase of porous media , 2000 .

[137]  A. Shukla,et al.  Diffusion layer parameters influencing optimal fuel cell performance , 2000 .

[138]  A. Shukla,et al.  Effect of diffusion-layer morphology on the performance of polymer electrolyte fuel cells operating at atmospheric pressure , 2000 .

[139]  J. W. Van Zee,et al.  The effects of compression and gas diffusion layers on the performance of a PEM fuel cell , 1999 .

[140]  G. Squadrito,et al.  Improvement in the diffusion characteristics of low Pt-loaded electrodes for PEFCs , 1999 .

[141]  G. Squadrito,et al.  Influence of the structure in low-Pt loading electrodes for polymer electrolyte fuel cells , 1998 .

[142]  E. Passalacqua,et al.  Influence of the PTFE content in the diffusion layer of low-Pt loading electrodes for polymer electrolyte fuel cells , 1998 .

[143]  R. Durand,et al.  Simulations of PEFC cathodes: an effectiveness factor approach , 1997 .

[144]  D. Bevers,et al.  Examination of the influence of PTFE coating on the properties of carbon paper in polymer electrolyte fuel cells , 1996 .

[145]  Edson A. Ticianelli,et al.  Development and electrochemical studies of gas diffusion electrodes for polymer electrolyte fuel cells , 1996 .

[146]  T. Springer,et al.  Characterization of polymer electrolyte fuel cells using ac impedance spectroscopy , 1996 .

[147]  Shimshon Gottesfeld,et al.  Low platinum loading electrodes for polymer electrolyte fuel cells fabricated using thermoplastic ionomers , 1995 .

[148]  T. Springer,et al.  Modeling and Experimental Diagnostics in Polymer Electrolyte Fuel Cells , 1993 .

[149]  Mark W. Verbrugge,et al.  A Mathematical Model of the Solid‐Polymer‐Electrolyte Fuel Cell , 1992 .

[150]  G. Maggio,et al.  Influence of electrodic properties on water management in a solid polymer electrolyte fuel cell , 1992 .

[151]  M. Verbrugge,et al.  Mathematical model of a gas diffusion electrode bonded to a polymer electrolyte , 1991 .

[152]  P. M. Heertjes,et al.  Analysis of diffusion in macroporous media in terms of a porosity, a tortuosity and a constrictivity factor , 1974 .

[153]  Marvin F. L. Johnson.  Pore structure and gaseous diffusion in solid catalysts , 1965 .

[154]  C. Tobias.  Effect of Gas Evolution on Current Distribution and Ohmic Resistance in Electrolyzers , 1959 .