Neural network-based real-time malfunction diagnosis of reactive ion etching using in situ metrology data

To mitigate capital equipment investments and enhance product quality, semiconductor manufactures are turning to advanced process control (APC) methods. With the objective of facilitating APC, this paper investigates a methodology for real-time malfunction diagnosis of reactive ion etching (RIE) employing two types of in situ metrology: optical emission spectroscopy (OES) and residual gas analysis (RGA). Based on metrology data, time series neural networks (TSNNs) are trained to generate evidential belief for potential malfunctions in real time, and Dempster-Shafer (D-S) theory is adopted for evidential reasoning. Successful malfunction diagnosis is achieved, with only a single missed alarm and a single false alarm occurring out of 21 test runs when both sensors are used in tandem. From the results, we conclude that the OES and RGA sensors, in conjunction with the TSNN models, can be effectively used for RIE monitoring and diagnosis. Furthermore, D-S theory is shown to be an appropriate inference methodology.

[1]  A. Narayanan.  Probability and statistics in engineering and management science , 1972 .

[2]  Duane S. Boning,et al.  Low open-area endpoint detection using a PCA-based T/sup 2/ statistic and Q statistic on optical emission spectroscopy measurements , 2000 .

[3]  G. Parsons,et al.  Endpoint uniformity sensing and analysis in silicon dioxide plasma etching using in situ mass spectrometry , 1998 .

[4]  Pang-Dow Foo,et al.  Optical Methods For End-Point Detection In Plasma Etching , 1981, Advanced Lithography.

[5]  Costas J. Spanos,et al.  Real time statistical process control for plasma etching , 1991, 1991 Proceedings IEEE/SEMI International Semiconductor Manufacturing Science Symposium.

[6]  B. Flinchbaugh,et al.  Monitoring and diagnosis of plasma etch processes , 1988 .

[7]  J. E. Jackson.  A User's Guide to Principal Components , 1991 .

[8]  H.M. Anderson.  Plasma diagnostics for semiconductor processing , 2000, 2000 Digest of the LEOS Summer Topical Meetings. Electronic-Enhanced Optics. Optical Sensing in Semiconductor Manufacturing. Electro-Optics in Space. Broadband Optical Networks (Cat. No.00TH8497).

[9]  J. Edward Jackson,et al.  A User's Guide to Principal Components. , 1991 .

[10]  John Y. Hung.  Feedback control with Posicast , 2003, IEEE Trans. Ind. Electron..

[11]  Costas J. Spanos,et al.  Automated malfunction diagnosis of semiconductor fabrication equipment: a plasma etch application , 1993 .

[12]  Gary S. May,et al.  Real-time diagnosis of semiconductor manufacturing equipment using a hybrid neural network expert system , 1997 .

[13]  Gary S. May,et al.  Neural-network-based sensor fusion of optical emission and mass spectroscopy data for real-time fault detection in reactive ion etching , 2005, IEEE Transactions on Industrial Electronics.

[14]  H. Yue,et al.  Fault detection of plasma etchers using optical emission spectra , 2000 .

[15]  Costas J. Spanos,et al.  Modeling and filtering of optical emission spectroscopy. Data for plasma etching systems , 1997, Proceedings of the 1997 American Control Conference (Cat. No.97CH36041).

[16]  Glenn Shafer,et al.  A Mathematical Theory of Evidence , 2020, A Mathematical Theory of Evidence.

[17]  Jay M. Tenenbaum,et al.  PIES: An Engineer's Do-It-Yourself Knowledge System for Interpretation of Parametric Test Data , 1986, AI Mag..

[18]  Gary S. May,et al.  Neural network modeling of reactive ion etching using principal component analysis of optical emission spectroscopy data , 2002, 13th Annual IEEE/SEMI Advanced Semiconductor Manufacturing Conference. Advancing the Science and Technology of Semiconductor Manufacturing. ASMC 2002 (Cat. No.02CH37259).

[19]  Rolf Isermann,et al.  Process fault detection based on modeling and estimation methods - A survey , 1984, Autom..

[20]  J. Robert Boston.  A signal detection system based on Dempster-Shafer theory and comparison to fuzzy detection , 2000, IEEE Trans. Syst. Man Cybern. Part C.

[21]  Reza Shadmehr,et al.  Principal Component Analysis of Optical Emission Spectroscopy and Mass Spectrometry: Application to Reactive Ion Etch Process Parameter Estimation Using Neural Networks , 1992 .

[22]  I. Jolliffe.  Principal Component Analysis , 2002 .

[23]  Gary S. May,et al.  Neural network modeling of reactive ion etching using optical emission spectroscopy data , 2003 .

[24]  N. S. Barnett,et al.  Private communication , 1969 .

[25]  Thierry Denoeux,et al.  A k-nearest neighbor classification rule based on Dempster-Shafer theory , 1995, IEEE Trans. Syst. Man Cybern..

[26]  Costas J. Spanos,et al.  Plasma etch modeling using optical emission spectroscopy , 1996 .