Experimental and theoretical study of the flow in the volute of a low specific-speed pump

The flow in the volute of a low specific-speed pump was studied both experimentally and numerically near its design point. Measurements included time-averaged values of velocity and static pressure at a large number of locations in the volute. The numerical computations were based on the unsteady three-dimensional potential flow model for the core flow. Viscous losses were quantified using additional models that use the potential flow as input. It is shown that near the design point of this pump, the core flow behaves like a potential flow, provided that no boundary layer separation occurs. Explanations are given for the presence of local deviations due to secondary flow. These local deviations do not influence the overall potential flow characteristics significantly.

[1]  Jeffrey P. Bons,et al.  Flow Physics Leading to System Instability in a Centrifugal Pump , 1993 .

[2]  B. Lakshminarayana,et al.  An Assessment of Computational Fluid Dynamic Techniques in the Analysis and Design of Turbomachinery—The 1990 Freeman Scholar Lecture , 1991 .

[3]  Charles G. Speziale,et al.  Turbulence Modeling in Noninertial Frames of Reference , 1989, Theoretical and Computational Fluid Dynamics.

[4]  Hydraulic Plant,et al.  The Flow in Volutes and Its Effect on Centrifugal Pump Performance , 1963 .

[5]  J. Green,et al.  Prediction of turbulent boundary layers and wakes in compressible flow by a lag-entrainment method , 1973 .

[6]  H. Schlichting.  Boundary Layer Theory , 1955 .

[7]  B. Lakshminarayana.  Fluid dynamics and heat transfer of turbomachinery , 1995 .

[8]  B. Thwaites,et al.  Approximate Calculation of the Laminar Boundary Layer , 1949 .

[9]  S. Gopalakrishnan,et al.  Interaction Between Impeller and Volute of Pumps at Off-Design Conditions , 1986 .

[10]  Ronald D. Flack,et al.  Turbulence Measurements in a Centrifugal Pump With a Synchronously Orbiting Impeller , 1992 .

[11]  Charles G. Speziale,et al.  Modeling the pressure gradient-velocity correlation of turbulence , 1985 .

[12]  J. Kueny,et al.  Numerical Calculation of 2D, Unsteady Flow in Centrifugal Pumps: Impeller and Volute Interaction , 1996 .

[13]  J. Z. Zhu,et al.  The finite element method , 1977 .

[14]  Allan J. Acosta,et al.  Effect of the Volute on Performance of a Centrifugal-Pump Impeller , 1957 .

[15]  R. Egger,et al.  Part Load Flow and Hydraulic Stability of Centrifugal Pumps , 1992 .

[16]  R. E. Rolling,et al.  Volute Pressure Distribution, Radial Force on the Impeller, and Volute Mixing Losses of a Radial Flow Centrifugal Pump , 1960 .

[17]  Ronald D. Flack,et al.  Two-Dimensional Flow Analysis of a Laboratory Centrifugal Pump , 1992 .

[18]  John D. Denton,et al.  The 1993 IGTI Scholar Lecture: Loss Mechanisms in Turbomachines , 1993 .

[19]  William N. Dawes,et al.  A Simulation of the Unsteady Interaction of a Centrifugal Impeller With Its Vaned Diffuser: Flow Analysis , 1995 .

[20]  Alexey J. Stepanoff,et al.  Centrifugal and Axial Flow Pumps: Theory, Design, and Application , 1991 .

[21]  Ronald D. Flack,et al.  Laser Velocimeter Measurements in a Centrifugal Flow Pump , 1989 .

[22]  R. A. Van den Braembussche,et al.  Experimental investigation of the flow in the vaneless diffuser of a centrifugal pump by particle image displacement velocimetry , 1989 .

[23]  N. P. Kruyt,et al.  A superelement-based method for computing unsteady three-dimensional potential flows in hydraulic turbomachines , 1999 .

[24]  R. A. Van den Braembussche,et al.  Influence of a Circumferential Exit Pressure Distortion on the Flow in an Impeller and Diffuser , 1987 .

[25]  Jan B. Jonker,et al.  Fluid flow in a rotating low-specific-speed centrifugal impeller passage , 1999 .