Surface behaviour in deuterium permeation through erbium oxide coatings

Suppression of tritium permeation through structural materials is essential in order to mitigate fuel loss and radioactivity concerns. Ceramic coatings have been investigated for over three decades as tritium permeation barriers (TPBs); however, a very limited number of investigations on the mechanism of hydrogen-isotope permeation through the coatings have been reported. In this study, deuterium permeation behaviour of erbium oxide coatings fabricated by filtered arc deposition on reduced activation ferritic/martensitic steels has been investigated. The samples coated on both sides of the substrates showed remarkably lower permeability than those coated on one side, and the maximum reduction efficiency indicated a factor of 105 compared with the substrate. The different permeation behaviour between the coatings facing the high and low deuterium pressure sides has been found by the crystal structure analysis and the evaluation of the energy barriers. It is suggested that the permeation processes on the front and back surfaces are independent, and the TPB efficiency of the samples coated on both sides can be expressed by a multiplication of that of each side.

[1]  T. Muroga,et al.  Microstructure change and deuterium permeation behavior of erbium oxide coating , 2011 .

[2]  T. Muroga,et al.  Microstructure control and deuterium permeability of erbium oxide coating on ferritic/martensitic steels by metal-organic decomposition , 2010 .

[3]  T. Płociński,et al.  Monoclinic B-phase erbium sesquioxide (Er2O3) thin films by filtered cathodic arc deposition , 2009 .

[4]  T. Muroga,et al.  Thermal Influence on Erbium Oxide Coating for Tritium Permeation Barrier , 2009 .

[5]  T. Muroga,et al.  Deuterium permeation behavior of erbium oxide coating on austenitic, ferritic, and ferritic/martensitic steels , 2009 .

[6]  A. Suzuki,et al.  Erbium oxide as a new promising tritium permeation barrier , 2007 .

[7]  T. Muroga,et al.  Fabrication of yttrium oxide and erbium oxide coatings by PVD methods , 2005 .

[8]  L. Giancarli,et al.  Status of Tritium Permeation Barrier Development in the EU , 2005 .

[9]  T. Muroga,et al.  Crystallization behavior of arc-deposited ceramic barrier coatings , 2004 .

[10]  Akihiro Suzuki,et al.  Recent progress in the development of electrically insulating coatings for a liquid lithium blanket , 2004 .

[11]  F. Koch,et al.  Deuterium permeation through Eurofer and α-alumina coated Eurofer , 2004 .

[12]  Jinnan Yu,et al.  The permeation of tritium through 316L stainless steel with multiple coatings , 2000 .

[13]  G. Benamati,et al.  Development of tritium permeation barriers on Al base in Europe , 1999 .

[14]  A. Perujo,et al.  Tritium permeation barriers for fusion technology , 1995 .

[15]  G. W. Hollenberg,et al.  Tritium/hydrogen barrier development , 1995 .

[16]  Ziqiang Zhao,et al.  The behaviour of diffusion and permeation of tritium through 316L stainless steel with coating of TiC and TiN + TiC , 1992 .

[17]  R. Stickney.  Diffusion and Permeation of Hydrogen Isotopes in Fusion Reactors: a Survey , 1972 .