Estimation of tool wear and optimization of cutting parameters based on novel ANFIS-PSO method toward intelligent machining

Compacted graphite iron (CGI) plays an important role in contemporary manufacturing of automobile engine, and coated tool is the best choice for milling of CGI. But studies about the estimation of the wear of coated tool are still rare and incomplete. As tool wear is the main factor that affects the quality of machined surface, in this study, we proposed an intelligent model-adaptive neuro fuzzy inference system (ANFIS) to estimate the tool wear, and ANFIS was learned by the improved particle swarm optimization (PSO) algorithm. As the PSO algorithm is easy to fall into the local minimum, the vibration and communication particle swarm optimization (VCPSO) algorithm was proposed by introducing the self-random vibration and inter-particle communication mechanisms. Besides that, to obtain the optimal combination of milling parameters, the multi-objective optimization based on minimum cutting power, surface roughness and maximum material removal rate (MRR) was studied using VCPSO algorithm. The experimental results showed that the ANFIS learned by VCPSO algorithm (ANFIS-VCPSO) has better performance for the estimation of tool wear compared with other intelligent models. The VCPSO algorithm was tested using Benchmark functions, and the results showed VCPSO algorithm has the global optimization ability. Meantime, the best combinations of milling parameters under different tool wear status were obtained through VCPSO algorithm. The proposed ANFIS-VCPSO model as a new intelligent model can be applied for real-time tool wear monitoring, which can improve the machining efficiency and prolong tool life. In order to meet the requirements of green and intelligent manufacturing, the best combination of milling parameters was also obtained in this work.

[1]  Farid Najafi,et al.  PSOSCALF: A new hybrid PSO based on Sine Cosine Algorithm and Levy flight for solving optimization problems , 2018, Appl. Soft Comput..

[2]  Dongdong Kong,et al.  Tool wear monitoring based on kernel principal component analysis and v-support vector regression , 2016, The International Journal of Advanced Manufacturing Technology.

[3]  Cihan Karakuzu,et al.  Prediction of surface roughness and cutting zone temperature in dry turning processes of AISI304 stainless steel using ANFIS with PSO learning , 2013 .

[4]  Lip Huat Saw,et al.  Sensitivity analysis of drill wear and optimization using Adaptive Neuro fuzzy –genetic algorithm technique toward sustainable machining , 2018 .

[5]  Vishal S. Sharma,et al.  Cutting tool wear estimation for turning , 2008, J. Intell. Manuf..

[6]  Rupinder Singh,et al.  Adaptive neuro-fuzzy inference system modeling of cryogenically treated AISI M2 HSS turning tool for estimation of flank wear , 2012, Expert Syst. Appl..

[7]  Shahaboddin Shamshirband,et al.  Using ANFIS for selection of more relevant parameters to predict dew point temperature , 2016 .

[8]  Amiya R Mohanty,et al.  Estimation of tool wear during CNC milling using neural network-based sensor fusion , 2007 .

[9]  H. Metin Ertunç,et al.  An adaptive neuro-fuzzy inference system model for predicting the performance of a refrigeration system with a cooling tower , 2011, Expert Syst. Appl..

[10]  A. Sedigh,et al.  A novel training algorithm in ANFIS structure , 2006, 2006 American Control Conference.

[11]  Mahdi Hasanipanah,et al.  Feasibility of PSO–ANFIS model to estimate rock fragmentation produced by mine blasting , 2016, Neural Computing and Applications.

[12]  Mahamad Nabab Alam,et al.  A novel differential particle swarm optimization for parameter selection of support vector machines for monitoring metal-oxide surge arrester conditions , 2018, Swarm Evol. Comput..

[13]  R. Eberhart,et al.  Comparing inertia weights and constriction factors in particle swarm optimization , 2000, Proceedings of the 2000 Congress on Evolutionary Computation. CEC00 (Cat. No.00TH8512).

[14]  Yoke San Wong,et al.  Identification of feature set for effective tool condition monitoring by acoustic emission sensing , 2004 .

[15]  Shibendu Shekhar Roy,et al.  Design of adaptive neuro-fuzzy inference system for predicting surface roughness in turning operation , 2005 .

[16]  Xiaofeng Hu,et al.  A hybrid information model based on long short-term memory network for tool condition monitoring , 2020, Journal of Intelligent Manufacturing.

[17]  L. Vijayaraghavan,et al.  Environmentally friendly drilling of intermetallic titanium aluminide at different aspect ratio , 2017 .

[18]  Azlan Mohd Zain,et al.  Robust optimization of ANFIS based on a new modified GA , 2015, Neurocomputing.

[19]  Shu Chang,et al.  Research on micro-thermophotovoltaic power generators with different emitting materials , 2005 .

[20]  Bülent Kaya,et al.  Force-torque based on-line tool wear estimation system for CNC milling of Inconel 718 using neural networks , 2011, Adv. Eng. Softw..

[21]  Ning Wang,et al.  Adaptive network-based fuzzy inference system with leave-one-out cross-validation approach for prediction of surface roughness , 2011 .

[22]  Che Hassan Che Haron,et al.  Online tool wear prediction system in the turning process using an adaptive neuro-fuzzy inference system , 2013, Appl. Soft Comput..

[23]  D. R. Salgado,et al.  An approach based on current and sound signals for in-process tool wear monitoring , 2007 .

[24]  Sang Won Lee,et al.  Optimization of environmentally benign micro-drilling process with nanofluid minimum quantity lubrication using response surface methodology and genetic algorithm , 2015 .

[25]  Rodolfo E. Haber,et al.  An optimal fuzzy control system in a network environment based on simulated annealing. An application to a drilling process , 2009, Appl. Soft Comput..

[26]  Zhijun Zhang,et al.  Study on the PSA-ANFIS approach for inverse design in slope engineering , 2012, 2012 9th International Conference on Fuzzy Systems and Knowledge Discovery.

[27]  Tuğrul Özel,et al.  Predictive modeling of surface roughness and tool wear in hard turning using regression and neural networks , 2005 .

[28]  Zhang Mengxiao,et al.  The high cycle fatigue, deformation and fracture of compacted graphite iron: Influence of temperature , 2018 .

[29]  Harish Sharma,et al.  Self Balanced Differential Evolution , 2014, J. Comput. Sci..