Bond-slip response of corroded SD bars with recycled coarse aggregate concrete

[1]  P. Bhargava,et al.  Stress–strain curves and mechanical properties of corrosion damaged super ductile reinforcing steel , 2021 .

[2]  P. Bhargava,et al.  Temperature-dependent properties of corroded super ductile TMT steel bars , 2021 .

[3]  P. Bhargava,et al.  Flexural behaviour of corroded RC beams exposed to fire , 2021 .

[4]  P. Bhargava,et al.  Bond-slip models for super ductile TMT bars with normal strength concrete exposed to elevated temperatures , 2020 .

[5]  P. Bhargava,et al.  Bond characteristics of corroded pullout specimens exposed to elevated temperatures , 2020 .

[6]  J. Lees,et al.  Corrosion-induced cracking and bond strength in reinforced concrete , 2019, Construction and Building Materials.

[7]  N. Concha.  BOND STRENGTH PREDICTION MODEL OF CORRODED REINFORCEMENT IN CONCRETE USING NEURAL NETWORK , 2019, International Journal of GEOMATE.

[8]  P. Bhargava,et al.  Residual mechanical behavior of (SD 500) hot rolled TMT reinforcing steel bars after elevated temperatures , 2018, Construction and Building Materials.

[9]  Dario Coronelli,et al.  Engineering bond model for corroded reinforcement , 2018 .

[10]  Cheng Jiang,et al.  Degradation of steel-to-concrete bond due to corrosion , 2018 .

[11]  Yafei Ma,et al.  Experimental investigation of corrosion effect on bond behavior between reinforcing bar and concrete , 2017 .

[12]  Carlo Drago,et al.  Degradation relationships for the mechanical properties of corroded steel rebars , 2017 .

[13]  U. Angst,et al.  The size effect in corrosion greatly influences the predicted life span of concrete infrastructures , 2017, Science Advances.

[14]  Hongwei Lin,et al.  Effects of confinements on the bond strength between concrete and corroded steel bars , 2016 .

[15]  A. Marí,et al.  Ultimate bond strength assessment of uncorroded and corroded reinforced recycled aggregate concretes , 2016 .

[16]  Yinghong Qin,et al.  A Study on the Bond Behavior of Corroded Reinforced Concrete Containing Recycled Aggregates , 2015 .

[17]  A. Minocha,et al.  Recycled aggregate from C&D waste & its use in concrete – A breakthrough towards sustainability in construction sector: A review , 2014 .

[18]  Stavroula J. Pantazopoulou,et al.  Reinforcement and Concrete Bond: State Determination along the Development Length , 2013 .

[19]  Bhupinder Singh,et al.  Bond behaviour between recycled aggregate concrete and deformed steel bars , 2013, Materials and Structures.

[20]  Özgür Eren,et al.  An experimental study on the bond strength between reinforcement bars and concrete as a function of concrete cover, strength and corrosion level , 2012 .

[21]  Per Kettil,et al.  Analysis of Mechanical Behavior of Corroded Reinforced Concrete Structures , 2011 .

[22]  P. Moyo,et al.  Influence of corrosion crack patterns on the rate of crack widening of RC beams , 2011 .

[23]  A. K. Ghosh,et al.  Time-dependent reliability of corrosion-affected RC beams—Part 1: Estimation of time-dependent strengths and associated variability , 2011 .

[24]  Zhaohui Huang,et al.  Modelling the bond between concrete and reinforcing steel in a fire , 2010 .

[25]  Luc Taerwe,et al.  Bond behaviour of reinforcing bars in self-compacting concrete: experimental determination by using beam tests , 2010 .

[26]  Pietro G. Gambarova,et al.  Residual behavior of steel rebars and R/C sections after a fire , 2009 .

[27]  Mohamed H. Harajli,et al.  Bond Stress-Slip Model for Steel Bars in Unconfined or Steel, FRC, or FRP Confined Concrete under Cyclic Loading , 2009 .

[28]  Y. Yang,et al.  Recycled aggregate concrete filled steel SHS beam-columns subjected to cyclic loading , 2009 .

[29]  Lan Chung,et al.  Bond strength prediction for reinforced concrete members with highly corroded reinforcing bars , 2008 .

[30]  Fernando Menezes de Almeida Filho,et al.  Bond-slip behavior of self-compacting concrete and vibrated concrete using pull-out and beam tests , 2008 .

[31]  A. K. Ghosh,et al.  Suggested Empirical Models for Corrosion-Induced Bond Degradation in Reinforced Concrete , 2008 .

[32]  Arnaud Castel,et al.  Corrosion process and structural performance of a 17 year old reinforced concrete beam stored in chloride environment , 2007 .

[33]  Kapilesh Bhargava,et al.  Corrosion-induced bond strength degradation in reinforced concrete—Analytical and empirical models , 2007 .

[34]  A. Marí,et al.  Influence of Amount of Recycled Coarse Aggregates and Production Process on Properties of Recycled Aggregate Concrete , 2007 .

[35]  Mario Plos,et al.  Effect of corrosion on bond in reinforced concrete under cyclic loading , 2006 .

[36]  K. Lundgren,et al.  Corrosion influence on bond in reinforced concrete , 2004 .

[37]  Giovanni Plizzari,et al.  Towards a harmonised European bond test , 2003 .

[38]  Takafumi Noguchi,et al.  Evaluation of the bond properties between concrete and reinforcement as a function of the degree of reinforcement corrosion , 2002 .

[39]  Ghaida’ K. Jumaa,et al.  Effect of Fiber Reinforcement on Bond Strength of Tension Lap Splices in High-Strength Concrete , 2001 .

[40]  W. Jason Weiss,et al.  Interaction between Loading, Corrosion, and Serviceability of Reinforced Concrete , 2000 .

[41]  P. Balaguru,et al.  BOND BEHAVIOR OF CORRODED REINFORCEMENT BARS , 2000 .

[42]  S. Pantazopoulou,et al.  Corrosion Effects on Bond Strength in Reinforced Concrete , 1999 .

[43]  S. Mirza,et al.  Corrosion Influence on Bond between Steel and Concrete , 1999 .

[44]  Rasheeduzzafar,et al.  EFFECT OF REINFORCEMENT CORROSION ON BOND STRENGTH , 1996 .

[45]  J. Cairns,et al.  Influence of rib geometry on strength of lapped joints: an experimental and analytical study , 1995 .

[46]  J. Cairns,et al.  Evaluation of bond pullout tests and their relevance to structural performance , 1995 .

[47]  Keith A. Jones,et al.  The splitting forces generated by bond , 1995 .

[48]  Mohamed H. Harajli,et al.  Development/Splice Strength of Reinforcing Bars Embedded in Plain and Fiber Reinforced Concrete , 1994 .

[49]  G. J. Al-Sulaimani,et al.  Effect of Rusting of Reinforcing Steel on its Mechanical Properties and Bond with Concrete , 1990 .

[50]  Ralejs Tepfers,et al.  Bond stress along lapped reinforcing bars , 1980 .

[51]  P. Bhargava,et al.  Analysis of behaviour of corroded RC beams exposed to elevated temperatures , 2021 .

[52]  Zila Rinaldi,et al.  Influence of corrosion on the bond strength of steel rebars in concrete , 2016 .

[53]  S. K. Bhattacharyya,et al.  Influence of field recycled coarse aggregate on properties of concrete , 2011 .

[54]  S K Kaushik,et al.  Influence of steel-making processes on the quality of reinforcement , 2002 .

[55]  J. G. Cabrera,et al.  Deterioration of concrete due to reinforcement steel corrosion , 1996 .