High-Value SLM Aerospace Components: From Design to Manufacture

Today additive manufacturing is shaping the future of global manufacturing and is influencing the design and manufacturability of tomorrows products. With selective laser melting (SLM), parts can be built directly from computer models or from measurements of existing components to be re-engineered, and therefore bypass traditional manufacturing processes such as cutting, milling and grinding. Benefits include: 1) new designs not possible using conventional subtractive technology, 2) dramatic savings in time, materials, wastage, energy and other costs in producing new components, 3) significant reductions in environmental impact, and 4) faster time to market. SLM builds up finished components from raw material powders layer by layer through laser melting. SLM removes many of the shape restrictions that limit design with traditional manufacturing methods, thereby allowing computationally optimised, high performance structures to be utilised. Functional engineering prototypes and actual components can then be built in their final shape with minimal material wastage. Samples and small product runs can be produced quickly at comparatively low cost to test and build market acceptance without major investment. In this chapter we present and discuss some of the concepts and findings involved in the design, manufacture and examination of high-value aerospace components from Ti-6Al-4V alloy produced at the RMITs Advanced Manufacturing Precinct.

[1]  S. L. Semiatin,et al.  The effect of laser power and traverse speed on microstructure, porosity, and build height in laser-deposited Ti-6Al-4V , 2000 .

[2]  Wesley J. Cantwell,et al.  An investigation into the compressive properties of stainless steel micro-lattice structures , 2011 .

[3]  B. Baufeld,et al.  Additive manufacturing of Ti–6Al–4V components by shaped metal deposition: Microstructure and mechanical properties , 2010 .

[4]  J. Mei,et al.  Microstructure study of direct laser fabricated Ti alloys using powder and wire , 2006 .

[5]  Christoph Leyens,et al.  Morphology, microstructure, and hardness of titanium (Ti-6Al-4V) blocks deposited by wire-feed additive layer manufacturing (ALM) , 2012 .

[6]  J. Kruth,et al.  A study of the microstructural evolution during selective laser melting of Ti–6Al–4V , 2010 .

[7]  H. Fraser,et al.  Effects of process variables and size-scale on solidification microstructure in beam-based fabrication of bulky 3D structures , 2009 .

[8]  C. Colin,et al.  As-Fabricated and Heat-Treated Microstructures of the Ti-6Al-4V Alloy Processed by Selective Laser Melting , 2011 .

[9]  S. Torquato,et al.  Simulated Properties of Kagomé and Tetragonal Truss Core Panels , 2003 .

[10]  I. Yadroitsava,et al.  Factor analysis of selective laser melting process parameters and geometrical characteristics of synthesized single tracks , 2012 .

[11]  C. Emmelmann,et al.  Laser Additive Manufacturing of Modified Implant Surfaces with Osseointegrative Characteristics , 2011 .

[12]  F. Klocke,et al.  Consolidation phenomena in laser and powder-bed based layered manufacturing , 2007 .

[13]  M. Bendsøe,et al.  Topology Optimization: "Theory, Methods, And Applications" , 2011 .

[14]  Konrad Wissenbach,et al.  Ductility of a Ti‐6Al‐4V alloy produced by selective laser melting of prealloyed powders , 2010 .

[15]  S. L. Semiatin,et al.  Microstructure and texture evolution during solidification processing of Ti–6Al–4V , 2003 .

[16]  Vikram Deshpande,et al.  The compressive and shear response of titanium matrix composite lattice structures , 2010 .

[17]  X. Guo,et al.  Mechanical consequence of trabecular bone loss and its treatment: a three-dimensional model simulation. , 2002, Bone.

[18]  P. Kobryn,et al.  Mechanical Properties of Laser-Deposited Ti-6Al-4V , 2001 .

[19]  J. Mei,et al.  Influence of position and laser power on thermal history and microstructure of direct laser fabricated Ti–6Al–4V samples , 2005 .

[20]  L. Murr,et al.  Microstructure and mechanical behavior of Ti-6Al-4V produced by rapid-layer manufacturing, for biomedical applications. , 2009, Journal of the mechanical behavior of biomedical materials.

[21]  Omer Van der Biest,et al.  Wire based additive layer manufacturing: Comparison of microstructure and mechanical properties of Ti–6Al–4V components fabricated by laser-beam deposition and shaped metal deposition , 2011 .

[22]  Yunheng Ji.  MORPHOLOGY , 1937, A Grammar of Italian Sign Language (LIS).

[23]  Aleksandar Subic,et al.  Feasible Build Orientations for Self-Supporting Fused Deposition Manufacture: A Novel Approach to Space-Filling Tesselated Geometries , 2013 .

[24]  Jing Liang,et al.  Microstructures of laser-deposited Ti–6Al–4V , 2004 .

[25]  J. Kruth,et al.  Micro-CT-based improvement of geometrical and mechanical controllability of selective laser melted Ti6Al4V porous structures , 2011 .

[26]  L. Hao,et al.  Effect of selective laser melting layout on the quality of stainless steel parts , 2012 .