Precision Control of High Speed Ball Screw Drives
暂无分享,去创建一个
[1] A. Slocum,et al. Precision Machine Design , 1992 .
[2] Jen Fin Lin,et al. Kinematic Analysis of the Ball Screw Mechanism Considering Variable Contact Angles and Elastic Deformations , 2003 .
[3] Masayoshi Tomizuka,et al. Feedforward Tracking Controller Design Based on the Identification of Low Frequency Dynamics , 1993 .
[4] Paolo Rocco,et al. Modeling, identification, and compensation of pulsating torque in permanent magnet AC motors , 1998, IEEE Trans. Ind. Electron..
[5] V. Utkin. Variable structure systems with sliding modes , 1977 .
[6] A. Galip Ulsoy,et al. An Approach to Control Input Shaping With Application to Coordinate Measuring Machines , 1999 .
[7] Stephen Yurkovich,et al. Vibration control of a two-link flexible robot arm , 1991, Proceedings. 1991 IEEE International Conference on Robotics and Automation.
[8] Junji Furusho,et al. Control of robot arms using joint torque sensors , 1997, Proceedings of International Conference on Robotics and Automation.
[9] Yusuf Altintas,et al. Sliding Mode Controller Design for High Speed Feed Drives , 2000 .
[10] R. Decarlo,et al. Variable structure control of nonlinear multivariable systems: a tutorial , 1988, Proc. IEEE.
[11] Hiroshi Nagase,et al. A method for suppressing torque ripple of an AC motor by current amplitude control , 1989 .
[12] Jean-Jacques E. Slotine,et al. Adaptive manipulator control: A case study , 1988 .
[13] Masayoshi Tomizuka,et al. Robust motion controller design for high-accuracy positioning systems , 1996, IEEE Trans. Ind. Electron..
[14] Kaan Erkorkmaz,et al. Compensation of Axial Vibrations in Ball Screw Drives , 2007 .
[15] Benedetto Allotta,et al. Constraints identification for vibration control of time-varying boundary conditions systems , 2001, 2001 IEEE/ASME International Conference on Advanced Intelligent Mechatronics. Proceedings (Cat. No.01TH8556).
[16] Otto J. M. Smith,et al. Feedback control systems , 1958 .
[17] T. Matsubayashi,et al. Some Considerations on Characteristics of Static Friction of Machine Tool Slideway , 1972 .
[18] G. Pritschow,et al. Research on the Efficiency of Feedforward Controllers in M Direct Drives , 1992 .
[19] Günter Pritschow,et al. A Comparison of Linear and Conventional Electromechanical Dives , 1998 .
[20] Hoang Le-Huy,et al. Minimization of Torque Ripple in Brushless DC Motor Drives , 1986, IEEE Transactions on Industry Applications.
[21] Yusuf Altintas,et al. High Speed CNC System Design. Part II : Modeling and Identification of Feed Drives , 2001 .
[22] Katsuhiko Ogata,et al. Discrete-time control systems , 1987 .
[23] Li Qiu,et al. A gain scheduled robust regulator for torque ripple elimination of AC permanent magnet motor systems , 2004, Proceedings of the 2004 IEEE International Conference on Control Applications, 2004..
[24] Jon Rigelsford,et al. Manufacturing Automation: Metal Cutting Mechanics, Machine Tool Vibrations, and CNC Design , 2004 .
[25] Masayoshi Tomizuka,et al. Contouring control of machine tool feed drive systems: a task coordinate frame approach , 2001, IEEE Trans. Control. Syst. Technol..
[26] Jiri Tlusty,et al. Effect of low-friction guideways and lead-screw flexibility on dynamics of high-speed machines , 1995 .
[27] W.-C. Gan,et al. Torque and velocity ripple elimination of AC permanent magnet motor control systems using the internal model principle , 2004, IEEE/ASME Transactions on Mechatronics.
[28] Uwe Heisel,et al. Thermography-Based Investigation into Thermally Induced Positioning Errors of Feed Drives By Example of a Ball Screw , 2006 .
[29] Warren P. Seering,et al. Using input command pre-shaping to suppress multiple mode vibration , 1991, Proceedings. 1991 IEEE International Conference on Robotics and Automation.
[30] Jan Swevers,et al. Gain-scheduling control of machine tools with varying structural flexibility , 2004 .
[31] Thomas M. Jahns,et al. Pulsating torque minimization techniques for permanent magnet AC motor drives-a review , 1996, IEEE Trans. Ind. Electron..
[32] Yoram Koren,et al. Variable-Gain Cross-Coupling Controller for Contouring , 1991 .
[33] Katsuhiko Ogata,et al. Modern Control Engineering , 1970 .
[34] Günter Pritschow,et al. On the Influence of the Velocity Gain Factor on the Path Deviation , 1996 .
[35] Chinedum E. Okwudire. Finite element modeling of ballscrew feed drive systems for control purposes , 2005 .
[36] J. F. Cuttino,et al. Analytical and Experimental Identification of Nonlinearities in a Single-Nut, Preloaded Ball Screw , 1997 .
[37] Marco Tursini,et al. Torque ripple compensation in permanent magnet synchronous motors based on Kalman filter , 1999, ISIE '99. Proceedings of the IEEE International Symposium on Industrial Electronics (Cat. No.99TH8465).
[38] Wen-Hong Zhu,et al. Virtual decomposition based control for generalized high dimensional robotic systems with complicated structure , 1997, IEEE Trans. Robotics Autom..
[39] Herbert Schulz,et al. Balancing requirements for fast rotating tools and spindle systems , 1998 .
[40] Karl Johan Åström,et al. Computer-controlled systems (3rd ed.) , 1997 .
[41] Masayoshi Tomizuka,et al. Zero Phase Error Tracking Algorithm for Digital Control , 1987 .
[42] Kaan Erkorkmaz,et al. Accurate tracking controller design for high-speed drives , 2007 .
[43] Yusuf Altintas,et al. Precision Tracking Controller Design for High Speed Feed Drives , 2005 .
[44] Kaan Erkorkmaz,et al. High Bandwidth Control of Ball Screw Drives , 2006 .
[45] Yusuf Altintas,et al. High speed CNC system design. Part I: jerk limited trajectory generation and quintic spline interpolation , 2001 .
[46] E. C. Levy. Complex-curve fitting , 1959, IRE Transactions on Automatic Control.
[47] Mikel Zatarain,et al. New Control Techniques Based on State Space Observers for Improving the Precision and Dynamic Behaviour of Machine Tools , 2005 .
[48] Kaan Erkorkmaz,et al. High speed contouring control for machine tool drives , 1999 .
[49] Yoram Koren,et al. Cross-Coupled Biaxial Computer Control for Manufacturing Systems , 1980 .
[50] Lennart Ljung,et al. System Identification: Theory for the User , 1987 .
[51] Amin Kamalzadeh,et al. Robust compensation of elastic deformations in ball screw drives , 2010 .
[52] Roberto Horowitz,et al. Stability and Robustness Analysis of a Class of Adaptive Controllers for Robotic Manipulators , 1990, Int. J. Robotics Res..
[53] Carlos Canudas de Wit,et al. A survey of models, analysis tools and compensation methods for the control of machines with friction , 1994, Autom..
[54] H. R. Bolton,et al. Influence of motor design and feed-current waveform on torque ripple in brushless DC drives , 1984 .
[55] Kripa K. Varanasi,et al. The Dynamics of Lead-Screw Drives: Low-Order Modeling and , 2004 .
[56] Nobuyuki Matsui,et al. Autocompensation of torque ripple of direct drive motor by torque observer , 1993 .
[57] Manfred Weck,et al. Sharp Corner Tracking Using the IKF Control Strategy , 1990 .
[58] M. A. Donmez,et al. A general methodology for machine tool accuracy enhancement by error compensation , 1986 .
[59] Bahram Ravani,et al. Kinematics of the Ball Screw Mechanism , 1994 .
[60] Kaan Erkorkmaz. Optimal trajectory generation and precision tracking control for multi-axis machines , 2004 .
[61] Romeo Ortega,et al. Design and implementation of an adaptive controller for torque ripple minimization in PM synchronous motors , 2000 .
[62] M. F. Zaeh,et al. Finite Element Modelling of Ball Screw Feed Drive Systems , 2004 .
[63] Hyuk Lim,et al. Position control of XY table in CNC machining center with non-rigid ballscrew , 2000, Proceedings of the 2000 American Control Conference. ACC (IEEE Cat. No.00CH36334).
[64] Yusuf Altintas,et al. High speed CNC system design. Part III: high speed tracking and contouring control of feed drives , 2001 .
[65] Hyuk Lim,et al. Torsional displacement compensation in position control for machining centers , 2001 .
[66] Ian Postlethwaite,et al. Multivariable Feedback Control: Analysis and Design , 1996 .
[67] T. Başar,et al. A New Approach to Linear Filtering and Prediction Problems , 2001 .