Hydrogen-Methane Blend Fuelling of a Heavy-Duty, Direct-Injection Engine

Combining hydrogen with natural gas as a fuel for internal combustion engines provides an early opportunity to introduce hydrogen into transportation applications. This study investigates the effects of fuelling a heavy-duty engine with a mixture of hydrogen and natural gas injected directly into the combustion chamber. The combustion system is unmodified from that developed for natural gas fuelling. The results demonstrate that hydrogen can have a significant beneficial effect in reducing emissions without affecting efficiency or requiring significant engine modifications. Combustion stability is enhanced through the higher reactivity of the hydrogen, resulting in reduced emissions of unburned methane. The fuel’s lower carbon-energy ratio also reduces CO2 emissions. These results combine to significantly reduce tailpipe greenhouse gas (GHG) emissions. However, the effect on net GHG’s, including both tailpipe and fuel-production emissions, depends on the source of the hydrogen. Cleaner sources, such as electrolysis based on renewables and hydro-electric power, generate a significant net reduction in GHG emissions. Hydrogen generated by steam-methane reforming is essentially GHG neutral, while electrolysis using electricity from fossil-fuel power plants significantly increases net GHG emissions compared to conventional natural gas fuelling.Copyright © 2007 by ASME

[1]  J. Houseman,et al.  A TWO-CHARGE ENGINE CONCEPT: HYDROGEN ENRICHMENT , 1974 .

[2]  Bing Liu,et al.  Combustion Characteristics of a Direct-Injection Engine Fueled with Natural Gas-Hydrogen Blends under Various Injection Timings , 2006 .

[3]  G. Dixon,et al.  Hydrogen Blended Natural Gas Operation of a Heavy Duty Turbocharged Lean Burn Spark Ignition Engine , 2004 .

[4]  H. L. Jones,et al.  Source Apportionment of Particulate Matter from a Diesel Pilot-Ignited Natural Gas Fuelled Heavy Duty DI Engine , 2005 .

[5]  A. Tsolakis,et al.  Dual Fuel Diesel Engine Operation Using H2. Effect on Particulate Emissions , 2005 .

[6]  Bang-quan He,et al.  Spark ignition natural gas engines—A review , 2007 .

[7]  John B. Heywood,et al.  Internal combustion engine fundamentals , 1988 .

[8]  James S. Wallace,et al.  Comparison of Emissions and Efficiency of a Turbocharged Lean-Burn Natural Gas and Hythane-Fueled Engine , 1997 .

[9]  Nox. reduction from a heavy-duty diesel engine with direct injection of natural gas and cooled exhaust gas recirculation , 2004 .

[10]  Kirk Collier,et al.  Emission Results from the New Development of A Dedicated Hydrogen - Enriched Natural Gas Heavy Duty Engine , 2005 .

[11]  Sandeep Munshi,et al.  Direct Injection of Natural Gas in a Heavy-Duty Diesel Engine , 2002 .

[12]  M. Karbasi.  The effects of hydrogen addition on the stability limits of methane jet diffusion flames , 1998 .

[13]  P. G. Hill,et al.  A supercharged heavy-duty diesel single-cylinder research engine for high-pressure direct injection of natural gas , 2003 .

[14]  A. Megaritis,et al.  Hydrogen enrichment: A way to maintain combustion stability in a natural gas fuelled engine with exhaust gas recirculation, the potential of fuel reforming , 2001 .

[15]  G. McTaggart-Cowan.  Pollutant formation in a gaseous-fuelled, direct injection engine , 2006 .

[16]  J. V. Vate,et al.  Greenhouse gas emissions from hydropower: The state of research in 1996 , 1997 .

[17]  P. G. Hill,et al.  Nitrogen Oxide Production in a Diesel Engine Fueled by Natural Gas , 2005 .

[18]  A. Elkamel,et al.  An integrated decision support framework for the assessment and analysis of hydrogen production pathways , 2006 .

[19]  Hua Zhao,et al.  The effects of exhaust gas recirculation on diesel combustion and emissions , 2000 .

[20]  Hiroki Hondo,et al.  Life cycle GHG emission analysis of power generation systems: Japanese case , 2005 .

[21]  Zong-ci Zhao,et al.  Climate change 2001, the scientific basis, chap. 8: model evaluation. Contribution of Working Group I to the Third Assessment Report of the Intergovernmental Panel on Climate Change IPCC , 2001 .

[22]  Michael Wang,et al.  Well-to-Wheels Analysis of Advanced Fuel/Vehicle Systems — A North American Study of Energy Use, Greenhouse Gas Emissions, and Criteria Pollutant Emissions , 2005 .

[23]  Christopher J. Koroneos,et al.  Life cycle assessment of hydrogen fuel production processes , 2004 .

[24]  N. Kahraman,et al.  Internal combustion engines fueled by natural gas—hydrogen mixtures , 2004 .

[25]  Anant D Vyas,et al.  Well-to-Wheels Analysis of Energy Use and Greenhouse Gas Emissions of Hydrogen Produced with Nuclear Energy , 2006 .

[26]  T. W. Forest,et al.  Effect of hydrogen addition on the performance of methane-fueled vehicles. Part I: effect on S.I. engine performance , 2001 .

[27]  Lester B. Lave,et al.  Evaluating automobile fuel/propulsion system technologies , 2003 .

[28]  Marco Aurélio dos Santos,et al.  Gross greenhouse gas fluxes from hydro-power reservoir compared to thermo-power plants , 2006 .

[29]  Gordon McTaggart-Cowan,et al.  Natural gas fuelling for heavy‐duty on‐road use: current trends and future direction , 2006 .

[30]  Ø. Skreiberg,et al.  A comparison of low-NOx burners for combustion of methane and hydrogen mixtures , 2002 .

[31]  J. Houghton,et al.  Climate change 2001 : the scientific basis , 2001 .

[32]  Matthew N. Swain,et al.  The Effects of Hydrogen Addition on Natural Gas Engine Operation , 1993 .

[33]  R. Sierens,et al.  Variable composition hydrogen/natural gas mixtures for increased engine efficiency and decreased emissions , 2000 .

[34]  P. G. Hill,et al.  Direct-Injected Hydrogen-Methane Mixtures in a Heavy-Duty Compression Ignition Engine , 2006 .