Direct Geometrico-Static Analysis of Under-Constrained Cable-Driven Parallel Robots with 4 Cables
暂无分享,去创建一个
[1] Saeed Behzadipour,et al. Workspace Analysis of a Three DOF Cable-Driven Mechanism , 2009 .
[2] Marco Carricato. Inverse Geometrico-Static Problem of Under-Constrained Cable-Driven Parallel Robots with Three Cables , 2011 .
[3] Elena R. Messina,et al. Design and workspace analysis of a 6–6 cable-suspended parallel robot , 2004 .
[4] Philippe Cardou,et al. Computing the lowest equilibrium pose of a cable-suspended rigid body , 2013 .
[5] Robert M. Corless,et al. Gröbner bases and matrix eigenproblems , 1996, SIGS.
[6] Hans J. Stetter,et al. Matrix eigenproblems are at the heart of polynomial system solving , 1996, SIGS.
[7] Denny Oetomo,et al. Wrench-closure workspace generation for cable driven parallel manipulators using a hybrid analytical , 2011 .
[8] Jean-Charles Faugère,et al. Efficient Computation of Zero-Dimensional Gröbner Bases by Change of Ordering , 1993, J. Symb. Comput..
[9] Clément Gosselin,et al. Cable-Driven Parallel Mechanisms: Application to a Locomotion Interface , 2008 .
[10] Nathan Michael,et al. Kinematics and Statics of Cooperative Multi-Robot Aerial Manipulation With Cables , 2009 .
[11] Imme Ebert-Uphoff,et al. Wrench-feasible workspace generation for cable-driven robots , 2006, IEEE Transactions on Robotics.
[12] Vijay R. Kumar,et al. The Direct Kinematics of Objects Suspended From Cables , 2010 .
[13] Sunil K. Agrawal,et al. On the Design of Adaptive Cable-Driven Systems , 2011 .
[14] Jean-Pierre Merlet,et al. Interval-Analysis-Based Determination of the Wrench-Feasible Workspace of Parallel Cable-Driven Robots , 2011, IEEE Transactions on Robotics.
[15] Clément Gosselin,et al. On the Ability of a Cable-Driven Robot to Generate a Prescribed Set of Wrenches , 2008 .
[16] Ou Ma,et al. Force-closure analysis of 6-DOF cable manipulators with seven or more cables , 2009, Robotica.
[17] Jadran Lenarčič,et al. Advances in Robot Kinematics: Analysis and Control , 1998 .
[18] A. N. Almadi,et al. A Gröbner-Sylvester Hybrid Method for Closed-Form Displacement Analysis of Mechanisms , 2000 .
[19] Mohammad Eghtesad,et al. Workspace Analysis for Planar and Spatial Redundant Cable Robots , 2009 .
[20] Thomas Heyden,et al. Dynamics and flatness-based control of a kinematically undetermined cable suspension manipulator , 2006 .
[21] David A. Cox,et al. Ideals, Varieties, and Algorithms , 1997 .
[22] Jonathan D. Hauenstein,et al. Software for numerical algebraic geometry: a paradigm and progress towards its implementation , 2008 .
[23] Sadao Kawamura,et al. High-speed manipulation by using parallel wire-driven robots , 2000, Robotica.
[24] Jean-Pierre Merlet,et al. Solving the Direct Geometrico-Static Problem of 3-3 Cable-Driven Parallel Robots by Interval Analysis: Preliminary Results , 2013 .
[25] Motoji Yamamoto,et al. Trajectory control of incompletely restrained parallel-wire-suspended mechanism based on inverse dynamics , 2004, IEEE Transactions on Robotics.
[26] Marco Carricato,et al. Inverse Geometrico-Static Analysis of Under-Constrained Cable-Driven Parallel Robots with Four Cables , 2012, ARK.
[27] Jadran Lenarčič,et al. Advances in Robot Kinematics , 2000 .
[28] Andrew J. Sommese,et al. The numerical solution of systems of polynomials - arising in engineering and science , 2005 .
[29] Saeed Behzadipour,et al. Stiffness of Cable-based Parallel Manipulators With Application to Stability Analysis , 2006 .
[30] P. Dietmaier,et al. The Stewart-Gough Platform of General Geometry can have 40 Real Postures , 1998 .
[31] A. Ming,et al. Study on multiple degree-of-freedom positioning mechanism using wires. I: Concept, design and control , 1994 .
[32] Yuxin Su,et al. Development of a large parallel-cable manipulator for the feed-supporting system of a next-generation large radio telescope , 2001, J. Field Robotics.
[33] Jean-Pierre Merlet,et al. Direct geometrico-static problem of under-constrained cable-driven parallel robots with three cables , 2011, 2011 IEEE International Conference on Robotics and Automation.
[34] Jean-Pierre Merlet,et al. Geometrico-Static Analysis of Under-Constrained Cable-Driven Parallel Robots , 2010 .
[35] Jean-Pierre Merlet,et al. Parallel Robots , 2000 .
[36] J. Michael McCarthy,et al. 21st Century Kinematics: Synthesis, Compliance, and Tensegrity , 2011 .
[37] M. Hiller,et al. Design, analysis and realization of tendon-based parallel manipulators. , 2005 .
[38] Vijay R. Kumar,et al. Workspaces of Cable-Actuated Parallel Manipulators , 2006 .
[39] Charles W. Wampler. Bezout number calculations for multi-homogeneous polynomial systems , 1992 .
[40] B. Roth,et al. Solving Polynomial Systems for the Kinematic Analysis and Synthesis of Mechanisms and Robot Manipulators , 1995 .
[41] M. Carricato,et al. Real solutions of the direct geometrico-static problem of under-constrained cable-driven parallel robots with 3 cables: a numerical investigation , 2012 .
[42] Sunil K. Agrawal,et al. On the Design of Cable-Suspended Planar Parallel Robots , 2005 .
[43] Jean-Pierre Merlet. Interval Analysis for Certified Numerical Solution of Problems in Robotics , 2009, Int. J. Appl. Math. Comput. Sci..
[44] H. Michael Möller,et al. Gröbner Bases and Applications: Gröbner Bases and Numerical Analysis , 1998 .