Investigations of the height of fractured zones in overburden induced by undersea mining

Water inrush accidents are devastating to underground mining operations and cause damage. In particular, in undersea mining, mining safety is endangered as the mining-induced fractured zone extends upwards towards the vast amount of seawater. This paper describes a case study of the development of a fractured zone induced by undersea mining of a tilted ore body in the Xinli district of the Sanshandao Gold Mine in Shandong Province, China. A theoretical prediction model based on overburden movement during mining is proposed to analyse the developed height of the fractured zone induced by undersea mining of the tilted ore body. The Universal Discrete Element Code (UDEC) software program is adopted to establish a numerical model to investigate the movement and fracturing of the overlying strata during mining of the gold deposit from the – 280-m level to the – 200-m level in the Xinli district. For the study area in the – 200-m level, in which the gold deposit is currently being mined and is the closest to the seafloor, the theoretical (32.7 m) and numerical (36.23 m) results for the height of the fractured zone are in agreement with the field observations (32.1 m) from a panoramic borehole televiewer. These results indicate that the fractured zone in the Xinli mining area has not reached the seafloor and that the mine remains safe.

[1]  Yinlong Lu,et al.  Numerical simulation of mining-induced fracture evolution and water flow in coal seam floor above a confined aquifer , 2015 .

[2]  Wenquan Zhang,et al.  Investigation of Water-Flow Fracture Zone Height in Fully Mechanized Cave Mining Beneath Thick Alluvium , 2017, Geotechnical and Geological Engineering.

[3]  Kang Peng,et al.  Deformation characteristics of sandstones during cyclic loading and unloading with varying lower limits of stress under different confining pressures , 2019, International Journal of Fatigue.

[4]  Defu Zhu,et al.  Mechanisms of support failure and prevention measures under double-layer room mining gobs – A case study: Shigetai coal mine , 2019 .

[5]  B. Li,et al.  Analysis of fractures of a hard rock specimen via unloading of central hole with different sectional shapes , 2019, Energy Science & Engineering.

[6]  M. Tao,et al.  Specimen shape and cross-section effects on the mechanical properties of rocks under uniaxial compressive stress , 2019, Bulletin of Engineering Geology and the Environment.

[7]  Gang Wang,et al.  Height of the mining-induced fractured zone above a coal face , 2017 .

[8]  Shanyong Wang,et al.  Three-dimensional mineral grade distribution modelling and longwall mining of an underground bauxite seam , 2018 .

[9]  Wenzhuo Cao,et al.  Life cycle assessment on lead–zinc ore mining and beneficiation in China , 2019, Journal of Cleaner Production.

[10]  Qing Ye,et al.  Numerical simulation on tendency mining fracture evolution characteristics of overlying strata and coal seams above working face with large inclination angle and mining depth , 2017, Arabian Journal of Geosciences.

[11]  Cun Zhang,et al.  Discrete element modeling of progressive failure in a wide coal roadway from water-rich roofs , 2016 .

[12]  Yunliang Tan,et al.  The Height of Water-Conducting Fractured Zones in Longwall Mining of Shallow Coal Seams , 2015, Geotechnical and Geological Engineering.

[13]  Shihao Tu,et al.  Mechanisms of support failure induced by repeated mining under gobs created by two-seam room mining and prevention measures , 2017 .

[14]  Wei Zhang,et al.  Visual Exploration of the Spatiotemporal Evolution Law of Overburden Failure and Mining-Induced Fractures: A Case Study of the Wangjialing Coal Mine in China , 2017 .

[15]  Shanyong Wang,et al.  Micromechanism of the diffusion of cement-based grouts in porous media under two hydraulic operating conditions: constant flow rate and constant pressure , 2018, Acta Geotechnica.

[16]  Wanfang Zhou,et al.  Prediction of Floor Water Inrush: The Application of GIS-Based AHP Vulnerable Index Method to Donghuantuo Coal Mine, China , 2011 .

[17]  Xibing Li,et al.  A numerical estimate method of dynamic fracture initiation toughness of rock under high temperature , 2018, Engineering Fracture Mechanics.

[18]  Xiating Feng,et al.  Evaluation of the Integrity of Deep Rock Masses Using Results of Digital Borehole Televiewers , 2017, Rock Mechanics and Rock Engineering.

[19]  Shanyong Wang,et al.  Separation and fracturing in overlying strata disturbed by longwall mining in a mineral deposit seam , 2017 .

[20]  Zilong Zhou,et al.  Strength and filtration stability of cement grouts in porous media , 2019, Tunnelling and Underground Space Technology.

[21]  L. Xiaoming,et al.  In Situ Investigations on Failure Evolution of Overlying Strata Induced by Mining Multiple Coal Seams , 2017 .

[22]  S. K. Das,et al.  Observations and classification of roof strata behaviour over longwall coal mining panels in India , 2000 .

[24]  V. Palchik.  In situ study of intensity of weathering-induced fractures and methane emission to the atmosphere through these fractures , 2012 .

[25]  V. Palchik,et al.  Localization of mining-induced horizontal fractures along rock layer interfaces in overburden: field measurements and prediction , 2005 .

[26]  Lei Weng,et al.  On the tensile mechanical characteristics of fine-grained granite after heating/cooling treatments with different cooling rates , 2019, Engineering Geology.

[27]  V. Palchik,et al.  Bulking factors and extents of caved zones in weathered overburden of shallow abandoned underground workings , 2015 .

[28]  Wengang Dang,et al.  Undersea safety mining of the large gold deposit in Xinli District of Sanshandao Gold Mine , 2012, International Journal of Minerals, Metallurgy, and Materials.

[29]  Xibing Li,et al.  Mechanical properties and fracture evolution of sandstone specimens containing different inclusions under uniaxial compression , 2019, International Journal of Rock Mechanics and Mining Sciences.

[30]  F. Marks,et al.  The borehole camera: An investigative geophysical tool applied to engineering, environmental, and mining challenges , 2002 .

[31]  I. Canbulat,et al.  Numerical analysis on mining-induced fracture development around river valleys , 2018 .

[32]  Xibing Li,et al.  Dynamic Properties of Thermally Treated Granite Subjected to Cyclic Impact Loading , 2018, Rock Mechanics and Rock Engineering.

[33]  Doug Stead,et al.  Simulation of roof shear failure in coal mine roadways using an innovative UDEC Trigon approach , 2014 .

[34]  Zilong Zhou,et al.  Water saturation effects on dynamic fracture behavior of sandstone , 2019, International Journal of Rock Mechanics and Mining Sciences.

[35]  I. D. Palmer,et al.  Measurement of Induced Fractures by Downhole TV Camera in Black Warrior Basin Coalbeds , 1991 .

[36]  Wengang Dang,et al.  Cancelling ore pillars in large-scale coastal gold deposit: A case study in Sanshandao gold mine, China , 2013 .

[37]  V. Palchik,et al.  Formation of fractured zones in overburden due to longwall mining , 2003 .

[38]  Xibing Li,et al.  Void fraction distribution in overburden disturbed by longwall mining of coal , 2016, Environmental Earth Sciences.

[39]  Shanyong Wang,et al.  Experimental Study of the Triaxial Strength Properties of Hollow Cylindrical Granite Specimens Under Coupled External and Internal Confining Stresses , 2018, Rock Mechanics and Rock Engineering.

[40]  John A. Hudson,et al.  ISRM Suggested Method for Rock Fractures Observations Using a Borehole Digital Optical Televiewer , 2013, Rock Mechanics and Rock Engineering.

[41]  Kang Peng,et al.  Effect of crack angles on energy characteristics of sandstones under a complex stress path , 2019, Engineering Fracture Mechanics.

[42]  Defu Zhu,et al.  A 3D Voronoi and subdivision model for calibration of rock properties , 2017 .

[43]  Hong Hao,et al.  Micro-seismic event detection and location in underground mines by using Convolutional Neural Networks (CNN) and deep learning , 2018 .

[44]  Bryn Hubbard,et al.  Application of borehole optical televiewing to investigating the 3-D structure of glaciers: implications for the formation of longitudinal debris ridges, midre Lovénbreen, Svalbard , 2010, Journal of Glaciology.

[45]  Shiliang Liu,et al.  An improved method for determining the position of overlying separated strata in mining , 2018 .

[46]  V. Palchik,et al.  Experimental investigation of apertures of mining-induced horizontal fractures , 2010 .

[47]  Xibing Li,et al.  Experimental investigation of the dynamic response of prestressed rockbolt by using an SHPB-based rockbolt test system , 2019, Tunnelling and Underground Space Technology.

[48]  Shanyong Wang,et al.  Experimental investigation of hard rock fragmentation using a conical pick on true triaxial test apparatus , 2018, Tunnelling and Underground Space Technology.

[49]  Hong Hao,et al.  Source identification of microseismic events in underground mines with interferometric imaging and cross wavelet transform , 2018 .

[50]  E. Wang,et al.  Rock Burst Monitoring by Integrated Microseismic and Electromagnetic Radiation Methods , 2016, Rock Mechanics and Rock Engineering.

[51]  Xibing Li,et al.  Experimental investigation of rock breakage by a conical pick and its application to non-explosive mechanized mining in deep hard rock , 2019, International Journal of Rock Mechanics and Mining Sciences.

[52]  N. Hurley,et al.  New method for quantification of vuggy porosity from digital optical borehole images as applied to the karstic Pleistocene limestone of the Biscayne aquifer, southeastern Florida , 2004 .

[53]  Wengang Dang,et al.  Rock quality classification and stability evaluation of undersea deposit based on M-IRMR , 2014 .

[54]  Jincai Zhang.  Investigations of water inrushes from aquifers under coal seams , 2005 .