Simultaneous enhancements in thermal insulation and toughness of resorcinol-formaldehyde/polydimethylsiloxane micro-foams

[1]  Xiaowen Tian,et al.  Carboxymethyl cellulose modified reduced graphene oxide coated melamine sponge for efficient seawater evaporation , 2022, Journal of Porous Materials.

[2]  H. Cheng,et al.  Daytime passive radiative cooler using zeolite , 2021, Journal of Porous Materials.

[3]  M. Cutroneo,et al.  Porous polydimethylsiloxane filled with graphene-based material for biomedicine , 2021, Journal of Porous Materials.

[4]  Donghui Long,et al.  Lightweight and Flexible Phenolic Aerogels with Three-Dimensional Foam Reinforcement for Acoustic and Thermal Insulation , 2021 .

[5]  Jie Ding,et al.  A promising form-stable phase change material composed of C/SiO2 aerogel and palmitic acid with large latent heat as short-term thermal insulation , 2020 .

[6]  Yudong Huang,et al.  Stretchable Electronics Based on PDMS Substrates , 2020, Advanced materials.

[7]  Xiaoru Li,et al.  Establishment of multistage gradient modulus intermediate layer between fiber and matrix via designing double “rigid-flexible” structure to improve interfacial and mechanical properties of carbon fiber/resin composites , 2020 .

[8]  Guoqiang Zhang,et al.  Experimental research on a feasible rice husk/geopolymer foam building insulation material , 2020 .

[9]  F. Song,et al.  Phosphorus-containing tung oil-based siloxane toughened phenolic foam with good mechanical properties, fire performance and low thermal conductivity , 2020 .

[10]  Yanbo Liu,et al.  Improved interfacial strength and ablation resistance of carbon fabric reinforced phenolic composites modified with functionalized ZrSiO4 sol , 2020, Materials & Design.

[11]  Yiguang Wang,et al.  Oxidation and ablation behaviors of carbon fiber/phenolic resin composites modified with borosilicate glass and polycarbosilane interface , 2020, Journal of Alloys and Compounds.

[12]  K. Reddy,et al.  Effect of organo-modified montmorillonite nanoclay on mechanical, thermal and ablation behavior of carbon fiber/phenolic resin composites , 2020 .

[13]  T. Zhao,et al.  Tough macroporous phenolic resin/bacterial cellulose composite with double-network structure fabricated by ambient pressure drying , 2020, Cellulose.

[14]  Yudong Huang,et al.  Greatly improving thermal stability of silicone resins by modification with POSS , 2020 .

[15]  R. Sun,et al.  Through-plane assembly of carbon fibers into 3D skeleton achieving enhanced thermal conductivity of a thermal interface material , 2020 .

[16]  K. Nakanishi,et al.  Colorless Transparent Melamine–Formaldehyde Aerogels for Thermal Insulation , 2020 .

[17]  N. Chopra,et al.  SiO2 aerogel-embedded carbon foam composite with Co-Enhanced thermal insulation and mechanical properties , 2019 .

[18]  Liming Liang,et al.  Improvement of performance of foam perlite thermal insulation material by the design of a triple-hierarchical porous structure , 2019, Energy and Buildings.

[19]  Jaehyun Cho,et al.  Super-insulating, flame-retardant, and flexible poly(dimethylsiloxane) composites based on silica aerogel , 2019, Composites Part A: Applied Science and Manufacturing.

[20]  Zhaofeng Chen,et al.  Preparation and characterization of ultralight glass fiber wool/phenolic resin aerogels with a spring-like structure , 2019, Composites Science and Technology.

[21]  Xian-chun Chen,et al.  Preparation of Thermosetting/Thermoplastic Polyimide Foam with Pleated Cellular Structure via In Situ Simultaneous Orthogonal Polymerization , 2019, ACS Applied Polymer Materials.

[22]  Wenzhi Li,et al.  Preparation and properties of phosphorus‐ and silicon‐modified phenolic resin with high ablation resistance , 2019, Polymer International.

[23]  Bote Zhao,et al.  Wood‐Derived Materials for Advanced Electrochemical Energy Storage Devices , 2019, Advanced Functional Materials.

[24]  Lei Wang,et al.  Superelastic, Anticorrosive, and Flame-Resistant Nitrogen-Containing Resorcinol Formaldehyde/Graphene Oxide Composite Aerogels , 2019, ACS Sustainable Chemistry & Engineering.

[25]  Jaehyun Cho,et al.  Flexible and coatable insulating silica aerogel/polyurethane composites via soft segment control , 2019, Composites Science and Technology.

[26]  Wei Zhang,et al.  Larch tannin-based rigid phenolic foam with high compressive strength, low friability, and low thermal conductivity reinforced by cork powder , 2019, Composites Part B: Engineering.

[27]  Xiao Hu,et al.  Large Toughening Effect in Biomimetic Geopolymer Composites via Interface Engineered 3D Skeleton , 2018, ACS Sustainable Chemistry & Engineering.

[28]  T. Zeng,et al.  Lightweight chopped carbon fibre reinforced silica-phenolic resin aerogel nanocomposite: Facile preparation, properties and application to thermal protection , 2018, Composites Part A: Applied Science and Manufacturing.

[29]  L. Bergström,et al.  Fire-Retardant and Thermally Insulating Phenolic-Silica Aerogels. , 2018, Angewandte Chemie.

[30]  Yonglai Lu,et al.  In situ assembly of SiO2 nanodots/layered double hydroxide nanocomposite for the reinforcement of solution-polymerized butadiene styrene rubber/butadiene rubber , 2018 .

[31]  Yang Wang,et al.  A study of thermal insulation properties and microstructure of ultra-light 3D-carbon foam via direct carbonization of polymer foam , 2018, Journal of Porous Materials.

[32]  S. Bhuvaneswari,et al.  Microstructure and phase evolution in pyrolysed short fibre reinforced polymethylsilsesquioxane-phenolic interpenetrating networks , 2017 .

[33]  Xinghong Zhang,et al.  Synthesis and characterization of novel phenolic resin/silicone hybrid aerogel composites with enhanced thermal, mechanical and ablative properties , 2017 .

[34]  L. Asaro,et al.  Innovative ablative fire resistant composites based on phenolic resins modified with mesoporous silica particles , 2017 .

[35]  Xinghong Zhang,et al.  Preparation, mechanical, thermal and ablative properties of lightweight needled carbon fibre felt/phenolic resin aerogel composite with a bird's nest structure , 2017 .

[36]  Jinwhan Kim,et al.  A microwave foaming method for fabricating glass fiber reinforced phenolic foam , 2016 .

[37]  Hong Fan,et al.  Silicone-modified phenolic resin: Relationships between molecular structure and curing behavior , 2016 .

[38]  Shuhong Yu,et al.  Scalable template synthesis of resorcinol-formaldehyde/graphene oxide composite aerogels with tunable densities and mechanical properties. , 2015, Angewandte Chemie.

[39]  Lin Liu,et al.  Synthesis of Boron-Containing Toughening Agents and Their Application in Phenolic Foams , 2015 .

[40]  Liviu Marsavina,et al.  Refinements on fracture toughness of PUR foams , 2014 .

[41]  L. Marșavina,et al.  Evaluation of Mixed Mode Fracture for PUR Foams , 2014 .

[42]  D. Hui,et al.  Improved ablation resistance of carbon–phenolic composites by introducing zirconium diboride particles , 2013 .

[43]  J. Kenny,et al.  Ablative properties of carbon black and MWNT/phenolic composites: A comparative study , 2012 .

[44]  G. Fang,et al.  Preparation and properties of palmitic acid/SiO2 composites with flame retardant as thermal energy storage materials , 2011 .

[45]  P. Flory.  Statistical Mechanics of Swelling of Network Structures , 1950 .