Acoustic control of powder dispensing in open tubes

A multiple powder metering and dispensing device has been constructed to create functionally graded materials by the solid free-forming process known as selective laser sintering. The device makes use of vertical open tubes through which the flow rate of dry powder is controlled by the characteristics of acoustic vibration in the 20–200 Hz region. Flow is initiated by high amplitude ‘attack’ waveforms and stops when vibration ceases. This simple but effective device raises many questions about the factors that cause flow arrest. The effects of tube diameter, amplitude, mechanical damping and particle size distribution are investigated. By selecting optimum parameters for a metallic powder, the overflow (discharge from the open tube after silence) was brought below 1 mg.

[1]  Michael J. Cima,et al.  New Process and Materials Developments in 3-Dimensional Printing, 3DP ™ , 1998 .

[2]  John Evans,et al.  Zirconia/alumina functionally graded material made by ceramic ink jet printing , 1999 .

[3]  R. M. Nedderman,et al.  Principles of Powder Mechanics. : Pergamon Press, 1970. 221 pp.,£3. , 1971 .

[4]  W. Ross.  Book reviewCharacterization of powder surfaces: Edited by G. D. Parfitt and K. S. W. Sing. Academic Press, New York, 1976. x + 464 pp. $30.25 (£13.80) , 1977 .

[5]  Mohammad Masoud Mohebi,et al.  A drop-on-demand ink-jet printer for combinatorial libraries and functionally graded ceramics. , 2002, Journal of combinatorial chemistry.

[6]  Joseph Pegna,et al.  Exploratory investigation of solid freeform construction , 1997 .

[7]  Shuji Matsusaka,et al.  Micro-feeding of fine powders using a capillary tube with ultrasonic vibration , 1995 .

[8]  S. Yang,et al.  On the rate of descent of powder in a vibrating tube , 2005 .

[9]  Scott McMillin,et al.  Desktop manifacturing : LOM vs pressing , 1994 .

[10]  J. Israelachvili.  Intermolecular and surface forces , 1985 .

[11]  R. Crawford,et al.  The packing of particles , 1987 .

[12]  M. J. Edirisinghe,et al.  Solid freeform fabrication of ceramics , 2003 .

[13]  Koji Yamamoto,et al.  Micro-feeding of a fine powder using a vibrating capillary tube , 1996 .

[14]  M. Cima,et al.  Transformation‐Toughened Ceramic Multilayers with Compositional Gradients , 2005 .

[15]  David L. Bourell,et al.  Selective laser sintering of metals and ceramics , 1992 .

[16]  H. H. Hausner,et al.  Influence of relative humidity on flow of metal and ceramic powders , 1974 .

[17]  John Evans,et al.  Solid freeforming of ceramics using a drop-on-demand jet printer , 1997 .

[18]  David B. Marshall,et al.  Rapid prototyping of functional ceramic composites , 1996 .

[19]  John W. Halloran,et al.  Freeform Fabrication of Ceramics via Stereolithography , 2005 .