Testing and Modeling of Soil-Structure Interface

An accurate modeling of soil-structure interfaces is very important in order to obtain realistic solutions of many soil-structure interaction problems. To study the mechanical characteristics of soil-structure interface, a series of direct shear tests were performed. A charged-coupled-device camera was used to observe the sand particle movements near the interface. It is shown that two different failure modes exist during interface shearing. Elastic perfect-plastic failure mode occurs along the smooth interface, while strain localization occurs in a rough interface accompanied with strong strain-softening and bulk dilatancy. To describe the behavior of the rough interface, this paper proposes a damage constitutive model with ten parameters. The parameters are identified using data from laboratory interface shear tests. The proposed model is capable of capturing most of the important characteristics of interface behavior, such as hardening, softening, and dilative response. The interface behaviors under direct and simple shear tests have been well predicted by the model. Furthermore, the present model has been implemented in a finite element procedure correctly and calculation results are satisfactory.

[1]  Panos D. Kiousis,et al.  Hierarchical Single‐Surface Model for Static and Cyclic Behavior of Interfaces , 1992 .

[2]  Roman D. Hryciw,et al.  Behavior of Sand Particles Around Rigid Ribbed Inclusions During Shear , 1993 .

[3]  Hideaki Kishida,et al.  Frictional Resistance at Yield between Dry Sand and Mild Steel , 1986 .

[4]  C. Desai,et al.  Modelling of joints and interfaces using the disturbed-state concept , 1992 .

[5]  Hu Li Application of damage interface model for 3-D FEM analysis , 2002 .

[6]  Yasunori Tsubakihara,et al.  BEHAVIOR OF SAND PARTICLES IN SAND-STEEL FRICTION , 1988 .

[7]  Toshiyuki Mitachi,et al.  DIRECT SHEAR TESTING METHOD AS A MEANS FOR ESTIMATING GEOGRID-SAND INTERFACE SHEAR-DISPLACEMENT BEHAVIOR , 1999 .

[8]  Ibrahim H. Sulaiman,et al.  Skin Friction for Steel Piles in Sand , 1967 .

[9]  J. G. Potyondy Skin Friction between Various Soils and Construction Materials , 1961 .

[10]  G W Clough,et al.  Finite Element Analyses of Retaining Wall Behavior , 1971 .

[11]  Yin Zong-ze,et al.  A STUDY OF DEFORMATION IN THE INTERFACE BETWEEN SOIL AND CONCRETE , 1995 .

[12]  Joseph E. Dove,et al.  BEHAVIOR OF DILATIVE SAND INTERFACES IN A GEOTRIBOLOGY FRAMEWORK , 2002 .

[13]  Jamshid Ghaboussi,et al.  Finite element for rock joints and interfaces , 1973 .

[14]  Kazem Fakharian,et al.  EFFECT OF STRESS PATHS ON THE BEHAVIOUR OF SAND-STEEL INTERFACES , 1996 .

[15]  Richard E. Goodman,et al.  CLOSURE ON A MODEL FOR THE MECHANICS OF JOINTED ROCK , 1968 .

[16]  Liming Hu,et al.  Application of damage model for soil–structure interface , 2003 .

[17]  Michael G. Katona,et al.  A simple contact–friction interface element with applications to buried culverts , 1983 .

[18]  Y. Yoshimi,et al.  A RING TORSION APPARATUS FOR EVALUATING FRICTION BETWEEN SOIL AND METAL SURFACES , 1981 .

[19]  H. Kishida,et al.  INFLUENTIAL FACTORS OF FRICTION BETWEEN STEEL AND DRY SANDS , 1986 .

[20]  Kazem Fakharian,et al.  Elasto‐plastic modelling of stress‐path‐dependent behaviour of interfaces , 2000 .

[21]  Surajit Pal,et al.  Disturbed state model for sand-geosynthetic interfaces and application to pull-out tests , 1999 .

[22]  O. Zienkiewicz,et al.  ANALYSIS OF NONLINEAR PROBLEMS IN ROCK MECHANICS WITH PARTICULAR REFERENCE TO JOINTED ROCK SYSTEMS , 1970 .

[23]  R. Nova,et al.  MODELLING OF SOIL-STRUCTURE INTERFACE BEHAVIOUR: A COMPARISON BETWEEN ELASTOPLASTIC AND RATE TYPE LAWS , 1990 .

[24]  Antonio Gens,et al.  A constitutive model for rock joints formulation and numerical implementation , 1990 .

[25]  Hu Li Experimental study on mechanical characteristics of soil-structure interface , 2001 .

[26]  Sg Paikowsky,et al.  A Dual Interface Apparatus for Testing Unrestricted Friction of Soil Along Solid Surfaces , 1995 .

[27]  Musharraf Zaman,et al.  Thin‐layer element for interfaces and joints , 1984 .