Application of digital image correlation at the microscale in fiber-reinforced composites

Digital image correlation (DIC) is applied to analyzing the deformation mechanisms under transverse compression in a fiber-reinforced composite. To this end, compression tests in a direction perpendicular to the fibers were carried out inside a scanning electron microscope and secondary electron images obtained at different magnifications during the test. Optimum DIC parameters to resolve the displacement and strain field were computed from numerical simulations of a model composite and they were applied to micrographs obtained at different magnifications (250×, 2000×, and 6000×). It is shown that DIC of low-magnification micrographs was able to capture the long range fluctuations in strain due to the presence of matrix-rich and fiber-rich zones, responsible for the onset of damage. At higher magnification, the strain fields obtained with DIC qualitatively reproduce the non-homogeneous deformation pattern due to the presence of stiff fibers dispersed in a compliant matrix and provide accurate results of the average composite strain. However, comparison with finite element simulations revealed that DIC was not able to accurately capture the average strain in each phase.

[1]  J. Embury,et al.  Digital image correlation studies for microscopic strain distribution and damage in dual phase steels , 2007 .

[2]  J. Llorca,et al.  Micromechanisms of deformation and fracture of polypropylene nonwoven fabrics , 2011 .

[3]  Hubert W. Schreier,et al.  Image Correlation for Shape, Motion and Deformation Measurements: Basic Concepts,Theory and Applications , 2009 .

[4]  J. Segurado,et al.  A computational micromechanics study of the effect of interface decohesion on the mechanical behavior of composites , 2005 .

[5]  Carlos González,et al.  Effect of fiber, matrix and interface properties on the in-plane shear deformation of carbon-fiber reinforced composites , 2010 .

[6]  Christophe Pinna,et al.  Local plastic strain evolution in a high strength dual-phase steel , 2010 .

[7]  Ignace Verpoest,et al.  Full-field strain measurements in textile deformability studies , 2008 .

[8]  Carlos González,et al.  Prediction of the failure locus of C/PEEK composites under transverse compression and longitudinal shear through computational micromechanics , 2008 .

[9]  G. Vendroux,et al.  Submicron deformation field measurements: Part 2. Improved digital image correlation , 1998 .

[10]  W. Peters,et al.  Digital Imaging Techniques In Experimental Stress Analysis , 1982 .

[11]  G. Nicoletto,et al.  Mesomechanic strain analysis of twill-weave composite lamina under unidirectional in-plane tension , 2008 .

[12]  Ignace Verpoest,et al.  Full field strain measurements for validation of meso-FE analysis of textile composites , 2008 .

[13]  A. Cuitiño,et al.  Full-field measurements of heterogeneous deformation patterns on polymeric foams using digital image correlation , 2002 .

[14]  W. F. Ranson,et al.  Applications of digital-image-correlation techniques to experimental mechanics , 1985 .

[15]  Carlos González,et al.  Mechanisms of shear deformation in fiber-reinforced polymers: experiments and simulations , 2009 .

[16]  Michel Bornert,et al.  Micromechanical Applications of Digital Image Correlation Techniques , 2000 .

[17]  J. Llorca,et al.  An experimental and numerical study of the influence of local effects on the application of the fibre push-in test , 2011 .

[18]  Javier Segurado,et al.  A numerical investigation of the effect of particle clustering on the mechanical properties of composites , 2003 .

[19]  Stéphane Roux,et al.  Extended three-dimensional digital image correlation (X3D-DIC) , 2008 .

[20]  M. Grédiac,et al.  Assessment of Digital Image Correlation Measurement Errors: Methodology and Results , 2009 .

[21]  Florent Bridier,et al.  In-plane strain measurements on a microscopic scale by coupling digital image correlation and an in situ SEM technique , 2006 .

[22]  Carlos González,et al.  Mechanical behavior of unidirectional fiber-reinforced polymers under transverse compression: Microscopic mechanisms and modeling , 2007 .

[23]  Patrick Onck,et al.  Failure mechanisms of closed-cell aluminum foam under monotonic and cyclic loading , 2006 .

[24]  S. Yongqi,et al.  Direct measurement of microscopic strain distribution near a crack tip , 1996 .