Electrocatalytically Active Graphene-Platinum Nanocomposites. Role of 2-D Carbon Support in PEM Fuel Cells

The use of a 2-D carbon nanostructure, graphene, as a support material for the dispersion of Pt nanoparticles provides new ways to develop advanced electrocatalyst materials for fuel cells. Platinum nanoparticles are deposited onto graphene sheets by means of borohydride reduction of H2PtCl6 in a graphene oxide (GO) suspension. The partially reduced GO-Pt catalyst is deposited as films onto glassy carbon and carbon Toray paper by drop cast or electrophoretic deposition methods. Nearly 80% enhancement in the electrochemically active surface area (ECSA) can be achieved by exposing partially reduced GO-Pt films with hydrazine followed by heat treatment (300 °C, 8 h). The electrocatalyst performance as evaluated from the hydrogen fuel cell demonstrates the role of graphene as an effective support material in the development of an electrocatalyst.

[1]  Dimitrios Gournis,et al.  Graphite Oxide: Chemical Reduction to Graphite and Surface Modification with Primary Aliphatic Amines and Amino Acids , 2003 .

[2]  Prashant V Kamat,et al.  Self-assembled linear bundles of single wall carbon nanotubes and their alignment and deposition as a film in a dc field. , 2004, Journal of the American Chemical Society.

[3]  Prashant V. Kamat,et al.  Carbon Nanostructures in Portable Fuel Cells: Single-Walled Carbon Nanotube Electrodes for Methanol Oxidation and Oxygen Reduction , 2004 .

[4]  W. S. Hummers,et al.  Preparation of Graphitic Oxide , 1958 .

[5]  J. Fendler,et al.  Preparation and Layer-by-Layer Self-Assembly of Silver Nanoparticles Capped by Graphite Oxide Nanosheets , 1999 .

[6]  S. Srinivasan,et al.  Quantum jumps in the PEMFC science and technology from the 1960s to the year 2000 Part I. Fundamental scientific aspects , 2001 .

[7]  E. Samulski,et al.  Synthesis of water soluble graphene. , 2008, Nano letters.

[8]  Robert C. Haddon,et al.  Proton exchange membrane fuel cells with carbon nanotube based electrodes , 2004 .

[9]  T. Springer,et al.  Water Uptake by and Transport Through Nafion® 117 Membranes , 1993 .

[10]  S. Stankovich,et al.  Synthesis of graphene-based nanosheets via chemical reduction of exfoliated graphite oxide , 2007 .

[11]  H. J. Kim,et al.  Conductivity enhancement in single-walled carbon nanotube bundles doped with K and Br , 1997, Nature.

[12]  Robert M. Darling,et al.  Model of Carbon Corrosion in PEM Fuel Cells , 2006 .

[13]  I. Dékány,et al.  Composite graphitic nanolayers prepared by self-assembly between finely dispersed graphite oxide and a cationic polymer , 2005 .

[14]  Prashant V. Kamat,et al.  Decorating Graphene Sheets with Gold Nanoparticles , 2008 .

[15]  Sandip Niyogi,et al.  Solution properties of graphite and graphene. , 2006, Journal of the American Chemical Society.

[16]  Imre Dékány,et al.  Enhanced acidity and pH-dependent surface charge characterization of successively oxidized graphite oxides , 2006 .

[17]  P. Kamat,et al.  TiO2-graphene nanocomposites. UV-assisted photocatalytic reduction of graphene oxide. , 2008, ACS nano.

[18]  Jacek Klinowski,et al.  A new structural model for graphite oxide , 1998 .

[19]  Takashi Yanagisawa,et al.  High performance of cup-stacked-type carbon nanotubes as a Pt–Ru catalyst support for fuel cell applications , 2004 .

[20]  Robert B. Moore,et al.  TGA–FTi.r. investigation of the thermal degradation of Nafion® and Nafion®/[silicon oxide]-based nanocomposites , 1998 .

[21]  Hubert A. Gasteiger,et al.  Handbook of fuel cells : fundamentals technology and applications , 2003 .

[22]  R. Stoltenberg,et al.  Evaluation of solution-processed reduced graphene oxide films as transparent conductors. , 2008, ACS nano.

[23]  G. Wallace,et al.  Processable aqueous dispersions of graphene nanosheets. , 2008, Nature nanotechnology.

[24]  Roberto Car,et al.  Functionalized single graphene sheets derived from splitting graphite oxide. , 2006, The journal of physical chemistry. B.

[25]  M. Søgaard,et al.  An improved method for the determination of the electrochemical active area of porous composite platinum electrodes , 2001 .

[26]  Anusorn Kongkanand,et al.  Single-wall carbon nanotubes supported platinum nanoparticles with improved electrocatalytic activity for oxygen reduction reaction. , 2006, Langmuir : the ACS journal of surfaces and colloids.

[27]  Andre K. Geim,et al.  The rise of graphene. , 2007, Nature materials.

[28]  Andre K. Geim,et al.  Two-dimensional atomic crystals. , 2005, Proceedings of the National Academy of Sciences of the United States of America.

[29]  Edson A. Ticianelli,et al.  Localization of platinum in low catalyst loading electrodes to to attain high power densities in SPE fuel cells , 1988 .

[30]  L. Nie,et al.  High dispersion and electrocatalytic properties of platinum nanoparticles on graphitic carbon nanofibers (GCNFs). , 2004, Journal of colloid and interface science.

[31]  J.A.S. Bett,et al.  Crystallite growth of platinum dispersed on graphitized carbon black , 1974 .

[32]  Jacek Klinowski,et al.  Structure of Graphite Oxide Revisited , 1998 .

[33]  Paul McGinn,et al.  Single-wall carbon nanotube-based proton exchange membrane assembly for hydrogen fuel cells. , 2005, Langmuir : the ACS journal of surfaces and colloids.

[34]  S. Stankovich,et al.  Stable aqueous dispersions of graphitic nanoplatelets via the reduction of exfoliated graphite oxide in the presence of poly(sodium 4-styrenesulfonate) , 2006 .

[35]  P. Kamat,et al.  Platinum dispersed on silica nanoparticle as electrocatalyst for PEM fuel cell , 2008 .