Fabrication and application of a stacked carbon electrode set including a suspended mesh made of nanowires and a substrate-bound planar electrode toward for an electrochemical/biosensor platform

Abstract Herein, we present a novel electrochemical sensing platform that consists of a set of suspended carbon nanowire-based mesh electrode with deliberately controlled shapes (hexagonal or diamond), and a substrate-bound planar carbon electrode. These electrodes overlapped one another with a pre-defined gap which was precisely controlled by using a polymerization-stop layer. By recycling the redox reactions between the electrodes with a 2.1-μm-gap, the redox current of Fe(CN)64−/Fe(CN)63− could be amplified approximately 37 times. This high current amplifying capability enabled dopamine detection down to 5 μM using cycling voltammetry. The complex morphology of the stacked carbon structures was obtained by simply using multiple UV-lithography processes and a single pyrolysis process that allowed pre-defined polymer structures to shrink into sub-micrometer-scale carbon structures. The suspended carbon mesh structures confined the mass-transfer near the electrode overlap region, and hence, the electrode set operated as a “sandwich” electrode enclosed within a microchannel. This effect was studied by simulating the mass transfer of the redox species, and confirmed by electrochemical measurements.

[1]  M. Madou,et al.  Fabrication of suspended carbon microstructures by e-beam writer and pyrolysis , 2006 .

[2]  T. Toyo’oka,et al.  Miniaturization of an analytical system using immobilized biomolecules for high-throughput screening , 2006, Analytical and bioanalytical chemistry.

[3]  Marc Madou,et al.  Electrical Properties and Shrinkage of Carbonized Photoresist Films and the Implications for Carbon Microelectromechanical Systems Devices in Conductive Media , 2005 .

[4]  Sheikh A. Akbar,et al.  Pyrolysis of Negative Photoresists to Fabricate Carbon Structures for Microelectromechanical Systems and Electrochemical Applications , 2002 .

[5]  Kosei Ueno,et al.  Characteristic electrochemical responses of polymer microchannel-microelectrode chips. , 2003, Analytical chemistry.

[6]  M. Madou,et al.  A novel method for the fabrication of high-aspect ratio C-MEMS structures , 2005, Journal of Microelectromechanical Systems.

[7]  Tomoyuki Yasukawa,et al.  Detection of hormone active chemicals using genetically engineered yeast cells and microfluidic devices with interdigitated array electrodes , 2009, Electrophoresis.

[8]  H. C. Foley,et al.  Temperature effects on electrical transport in semiconducting nanoporous carbon nanowires , 2008, Nanotechnology.

[9]  Boris Hofmann,et al.  Nanocavity redox cycling sensors for the detection of dopamine fluctuations in microfluidic gradients. , 2010, Analytical chemistry.

[10]  Koji Suzuki,et al.  Electrochemical behavior of parallel opposed dual electrode in a microchannel , 2004 .

[11]  S. Mikkelsen,et al.  Cyclic biamperometry at micro-interdigitated electrodes. , 2011, Analytical chemistry.

[12]  Joseph Wang,et al.  Electrochemical biosensors: towards point-of-care cancer diagnostics. , 2006, Biosensors & bioelectronics.

[13]  Chang-Wen Huang,et al.  Electrochemical Detection of the Neurotransmitter Dopamine by Nanoimprinted Interdigitated Electrodes and a CMOS Circuit With Enhanced Collection Efficiency , 2011, IEEE Sensors Journal.

[14]  Jin-Woo Choi,et al.  A new dynamic electrochemical transduction mechanism for interdigitated array microelectrodes. , 2004, Lab on a chip.

[15]  M. Madou,et al.  Increased graphitization in electrospun single suspended carbon nanowires integrated with carbon-MEMS and carbon-NEMS platforms. , 2012, ACS applied materials & interfaces.

[16]  Jeong-Il Heo,et al.  Carbon Interdigitated Array Nanoelectrodes for Electrochemical Applications , 2011 .

[17]  Shenguang Ge,et al.  Electrochemical DNA sensor based on three-dimensional folding paper device for specific and sensitive point-of-care testing , 2012 .

[18]  A. van den Berg,et al.  Redox cycling with facing interdigitated array electrodes as a method for selective detection of redox species. , 2007, The Analyst.

[19]  Y. Lim,et al.  A stacked electrode set including suspended carbon nanomeshes and planar carbon pads for electrochemical/bio sensor applications , 2013, 2013 Transducers & Eurosensors XXVII: The 17th International Conference on Solid-State Sensors, Actuators and Microsystems (TRANSDUCERS & EUROSENSORS XXVII).

[20]  Tsutomu Horiuchi,et al.  Development of Nanoscale Interdigitated Array Electrode as Electrochemical Sensor Platform for Highly Sensitive Detection of Biomolecules , 2008 .

[21]  C. Henry,et al.  Dual-electrode electrochemical detection for poly(dimethylsiloxane)-fabricated capillary electrophoresis microchips. , 2000, Analytical chemistry.

[22]  T. Osaka,et al.  High efficiency electrochemical immuno sensors using 3D comb electrodes. , 2005, Biosensors & bioelectronics.

[23]  Yeongjin Lim,et al.  The effect of channel height and electrode aspect ratio on redox cycling at carbon interdigitated array nanoelectrodes confined in a microchannel. , 2013, The Analyst.

[24]  Hitoshi Shiku,et al.  Addressable electrode array device with IDA electrodes for high-throughput detection. , 2011, Lab on a chip.

[25]  Changming Li,et al.  Fabrication of comb interdigitated electrodes array (IDA) for a microbead-based electrochemical assay system. , 2004, Biosensors & bioelectronics.

[26]  Guigen Zhang,et al.  The voltammetric performance of interdigitated electrodes with different electron-transfer rate constants , 2007 .

[27]  A. Manz,et al.  Miniaturized total chemical analysis systems: A novel concept for chemical sensing , 1990 .

[28]  Piers Andrew,et al.  Electrochemical biosensors at the nanoscale. , 2009, Lab on a chip.