Equilibrium and Rate Based Simulation of MTBE Reactive Distillation Column

Abstract—Equilibrium and rate based models have been applied in the simulation of methyl tertiary-butyl ether (MTBE) synthesis through reactive distillation. Temperature and composition profiles were compared for both the models and found that both the profiles trends, though qualitatively similar are significantly different quantitatively. In the rate based method (RBM), multicomponent mass transfer coefficients have been incorporated to describe interphase mass transfer. MTBE mole fraction in the bottom stream is found to be 0.9914 in the Equilibrium Model (EQM) and only 0.9904 for RBM when the same column configuration was preserved. The individual tray efficiencies were incorporated in the EQM and simulations were carried out. Dynamic simulation have been also carried out for the two column configurations and compared.

[1]  Rajamani Krishna,et al.  Modelling reactive distillation , 2000 .

[2]  Rajamani Krishna,et al.  Multiple solutions in reactive distillation for methyl tert-butyl ether synthesis , 1993 .

[3]  Rajamani Krishna,et al.  Comparison of equilibrium stage and nonequilibrium stage models for reactive distillation , 2000 .

[4]  Norbert Asprion,et al.  Nonequilibrium rate-based simulation of reactive systems : Simulation model, heat transfer, and influence of film discretization , 2006 .

[5]  Eugeny Y. Kenig,et al.  Rate-based modelling and simulation of reactive separations in gas/vapour–liquid systems , 2005 .

[6]  Kannan M. Moudgalya,et al.  Non-equilibrium stage modeling and non-linear dynamic effects in the synthesis of TAME by reactive distillation , 2008, Comput. Chem. Eng..

[7]  Michael F. Doherty,et al.  Reactive distillation by design , 1992 .

[8]  Thomas F. Edgar,et al.  A comparison of steady-state equilibrium and rate-based models for packed reactive distillation columns , 2002 .

[9]  M. Morbidelli,et al.  Synthesis of propylene oxide from propylene chlorohydrins—I: Kinetic aspects of the process , 1979 .

[10]  Paul I. Barton,et al.  Dynamic rate-based model for multicomponent batch distillation , 1999 .

[11]  Rajamani Krishna,et al.  Development of a dynamic nonequilibrium cell model for reactive distillation tray columns , 2000 .

[12]  Devrim B. Kaymak,et al.  Evaluation of a two-temperature control structure for a two-reactant/two-product type of reactive distillation column , 2006 .

[13]  J. D. Shoemaker,et al.  Cumene by catalytic distillation , 1987 .

[14]  N. Kaistha,et al.  Decentralized control of a kinetically controlled ideal reactive distillation column , 2008 .

[15]  Peter L. Douglas,et al.  Dynamic Simulation and Control of an MTBE Catalytic Distillation Column , 2008 .

[16]  William L. Luyben,et al.  Plantwide control design procedure , 1997 .

[17]  Milorad P. Dudukovic,et al.  A comparison of the equilibrium and nonequilibrium models for a multicomponent reactive distillation column , 1998 .

[18]  Moses O. Tadé,et al.  ETBE Synthesis via Reactive Distillation : 2. Dynamic Simulation and Control Aspects , 1997 .