Improved theoretical modeling of a cyclone separator as a diesel soot particulate emission arrester

Particulate matter is considered to be the most harmful pollutant emitted into air from diesel engine exhaust, and its reduction is one of the most challenging problems in modern society. Several after-treatment retrofit programs have been proposed to control such emission, but to date, they suffer from high engineering complexity, high cost, thermal cracking, and increased back pressure, which in turn deteriorates diesel engine combustion performance. This paper proposes a solution for controlling diesel soot particulate emissions by an improved theoretical model for calculating the overall collection efficiency of a cyclone. The model considers the combined effect of collection efficiencies of both outer and inner vortices by introducing a particle distribution function to account for the non-uniform distribution of soot particles across the turbulent vortex section and by including the Cunningham correction factor for molecular slip of the particles. The cut size diameter model has also been modified and proposed by introducing the Cunningham correction factor for molecular slip of the separated soot particles under investigation. The results show good agreements with the existing theoretical and experimental studies of cyclones and diesel particulate filter flow characteristics of other applications.

[1]  Martin Crawford,et al.  Air pollution control theory , 1976 .

[2]  J. M. Wheeldon,et al.  Performance of cyclones in the off-gas path of a pressurised fluidised bed combustor , 1987 .

[4]  S. K. Oh,et al.  PERFORMANCE AND EXHAUST GAS CHARACTERISTICS ON DIESEL PARTICULATE FILTER TRAP , 2002 .

[5]  John H. Johnson,et al.  An Experimental and Modeling Study of Cordierite Traps - Pressure Drop and Permeability of Clean and Particulate Loaded Traps , 2000 .

[6]  Yiannis A. Levendis,et al.  Development of a New Diesel Particulate Control System with Wall-Flow Filters and Reverse Cleaning Regeneration , 1992 .

[7]  R. Crane,et al.  Light-duty diesel exhaust after-treatment by a multicyclone particulate separator with an oxidation catalyst , 2000 .

[8]  Werner Strauss,et al.  Industrial gas cleaning , 1966 .

[9]  Richard Bloom.  The Development of Fiber Wound Diesel Particulate Filter Cartridges , 1995 .

[10]  A New Theoretical Approach of Designing Cyclone Separator for Controlling Diesel Soot Particulate Emission , 2006 .

[11]  M. Bohnet.  Influence of the gas temperature on the separation efficiency of aerocyclones , 1995 .

[12]  P. W. Dietz,et al.  Collection efficiency of cyclone separators , 1981 .

[13]  Peter Stommel,et al.  Diesel Exhaust Treatment - New Approaches to Ultra Low Emission Diesel Vehicles , 1999 .

[14]  Jan Czerwinski,et al.  Particle Size Distribution Downstream Traps of Different Design , 1995 .

[15]  Cristóbal Cortés,et al.  Modeling the gas and particle flow inside cyclone separators , 2007 .

[16]  C. E. Lapple,et al.  Flow Pattern and Pressure Drop in Cyclone Dust Collectors , 1939 .

[17]  Makoto Horiuchi,et al.  The Effects of Flow-through Type Oxidation Catalysts on the Particulate Reduction of 1990's Diesel Engines , 1990 .

[18]  David A. Cornwell,et al.  Introduction to Environmental Engineering , 1991 .

[19]  George G. Muntean,et al.  A Theoretical Model for the Correlation of Smoke Number to Dry Particulate Concentration in Diesel Exhaust , 1999 .

[20]  W. A. Cutler,et al.  A New High Temperature Ceramic Material for Diesel Particulate Filter Applications , 2000 .

[21]  Knowlton J. Caplan.  43 – Source Control by Centrifugal Force and Gravity , 1968 .

[22]  David Leith,et al.  Cyclone performance and design , 1973 .

[23]  A. J. ter Linden.  Investigations into Cyclone Dust Collectors , 1949 .

[24]  D. Kittelson.  Engines and nanoparticles: a review , 1998 .