论文信息 - Improving the coupled‐mode method by means of step functions: Application to partial‐height isotropic or anisotropic dielectric parallel‐plate waveguides

Improving the coupled‐mode method by means of step functions: Application to partial‐height isotropic or anisotropic dielectric parallel‐plate waveguides

The main drawback of the coupled-mode method is the poor convergence and accuracy of the discontinuous field components. The greater the discontinuity, the worse these problems become. This Letter presents an improvement of the method, allowing this drawback to be minimized. © 2002 Wiley Periodicals, Inc. Microwave Opt Technol Lett 33: 408–414, 2002; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.10337

[1] S. Schelkunoff. Generalized telegraphist's equations for waveguides , 1952 .

[2] Renato G. Bosisio,et al. A study on the solutions of chirowaveguides and bianisotropic waveguides with the use of coupled‐mode analysis , 1997 .

[3] Angel Vegas,et al. Numerical analysis of discontinuities in a rectangular waveguide loaded with isotropic or anisotropic obstacles by means of the coupled‐mode method and the mode‐matching method , 1994 .

[4] T. Itoh,et al. Coupled-Mode Theory Analysis of Distributed Nonreciprocal Structures , 1981 .

[5] Angel Vegas,et al. Modelling multiple discontinuities in rectangular waveguide partially filled with non-reciprocal ferrites , 1993 .

[6] Miguel Angel Solano Andres Prieto Angel Vegas. Theoretical and experimental study of two port structures composed of different size rectangular waveguides partially filled with isotropic dielectrics , 1998 .

[7] H. Unz,et al. Propagation in Arbitrarily Magnetized Ferrites Between Two Conducting Parallel Planes , 1963 .