Theoretical development and numerical investigation on energy absorption behavior of tapered multi-cell tubes

Abstract In this study, the crashworthiness behavior of the tapered multi-cell tubes is theoretically and numerically investigated. The side wall tapering and the cross section dividing into the cells are used in order to improve the energy absorption of the thin walled structure. In order to estimate the non-constant mean crush load of the tapered multi-cell tubes, incorporating the theoretical relations on the energy absorption of the simple multi-cell and tapered single-cell tubes, in conjunction with numerical results, would lead to the development of the analytical formula. The analytical formula is based on the mean crush load calculation of the equivalent segmented simple multi-cell tubes. In order to prepare a realistic finite element model, the elastic–plastic-damage material assumption is introduced into the numerical simulation. The numerical predictions of the mean crush load are consisted with experimental data in literature. The results reveal that the increase of the taper angle, the wall thickness and the number of cells in the cross section would enrich the crashworthiness capacity of the structure. The results indicate that the crashworthiness improvement rate of the structure with number of cells in the cross section is decreased in such a way that the variation of the energy absorption efficiency in the thin walled structure with the 8×8, 9×9 and 10×10 cells in the cross section would be negligible. The transition wall thickness in which the crashworthiness of the tapered multi-cell structure transits from thin to thick walled behavior are determined.

[1]  J. M. Alexander.  AN APPROXIMATE ANALYSIS OF THE COLLAPSE OF THIN CYLINDRICAL SHELLS UNDER AXIAL LOADING , 1960 .

[2]  H. Dell,et al.  A comprehensive failure model for crashworthiness simulation of aluminium extrusions , 2004 .

[3]  P. Zeng,et al.  Comparative analysis between stress- and strain-based forming limit diagrams for aluminum alloy sheet 1060 , 2012 .

[4]  H. R. Allahbakhsh,et al.  Design optimization of square aluminium damage columns with crashworthiness criteria , 2011 .

[5]  Stefan Tabacu,et al.  Axial crushing of circular structures with rectangular multi-cell insert , 2015 .

[6]  Guoxing Lu,et al.  Quasi-static axial compression of thin-walled tubes with different cross-sectional shapes , 2013 .

[7]  S. P. Keeler.  Plastic instability and fracture in sheets stretched over rigid punches , 1961 .

[8]  Milad Abbasi,et al.  Multi-cornered thin-walled sheet metal members for enhanced crashworthiness and occupant protection , 2015 .

[9]  G. Cheng,et al.  A comparative study of energy absorption characteristics of foam-filled and multi-cell square columns , 2007 .

[10]  S. Reid,et al.  Static and dynamic crushing of tapered sheet metal tubes of rectangular cross-section , 1986 .

[11]  G. Cheng,et al.  Theoretical prediction and numerical simulation of multi-cell square thin-walled structures , 2006 .

[12]  Saeed Ziaei-Rad,et al.  Parametric study and numerical analysis of empty and foam-filled thin-walled tubes under static and dynamic loadings , 2008 .

[13]  A. Alavi Nia,et al.  An investigation on the energy absorption characteristics of multi-cell square tubes , 2013 .

[14]  M. Ashby,et al.  Cellular solids: Structure & properties , 1988 .

[15]  T. Wierzbicki,et al.  Relative merits of single-cell, multi-cell and foam-filled thin-walled structures in energy absorption , 2001 .

[16]  Hui Zhang,et al.  Axial crushing of tapered circular tubes with graded thickness , 2015 .

[17]  Shu Yang,et al.  Crushing analysis and multiobjective crashworthiness optimization of tapered square tubes under oblique impact loading , 2012 .

[18]  Zonghua Zhang,et al.  Analysis of energy absorption characteristics of cylindrical multi-cell columns , 2013 .

[19]  T. Wierzbicki,et al.  On the Crushing Mechanics of Thin-Walled Structures , 1983 .

[20]  T. Wierzbicki,et al.  Experimental and numerical studies of foam-filled sections , 2000 .

[21]  A. A. Nia,et al.  Comparative analysis of energy absorption capacity of simple and multi-cell thin-walled tubes with triangular, square, hexagonal and octagonal sections , 2014 .

[22]  Jianguang Fang,et al.  On design of multi-cell tubes under axial and oblique impact loads , 2015 .

[23]  Heung-Soo Kim,et al.  New extruded multi-cell aluminum profile for maximum crash energy absorption and weight efficiency , 2002 .

[24]  David P. Thambiratnam,et al.  A numerical study on the impact response and energy absorption of tapered thin-walled tubes , 2004 .