High-power digital envelope modulator for a polar transmitter in 65nm CMOS

In this paper, an 8-bit envelope modulator as part of a digital polar transmitter for Bluetooth and WLAN is demonstrated. The modulator performs digital-to-analog conversion, up-mixing and power amplification, allowing for an area-efficient, fully-integrated transmitter architecture. The circuit delivers 24.8 dBm peak-power and 16.7 dBm WLAN OFDM power with a mean EVM of 2.7% at 2 GHz. The measured peak-power drain efficiency is 51% while the efficiency for OFDM is 24%. In Bluetooth EDR mode a 19.7 dBm signal with 5%-rms, 13%-peak EVM, and 26% drain efficiency has been measured. The circuit is fabricated in CMOS 65 nm with 50 Aring thick-oxide devices and 2.5 V power supply.

[1]  P.T.M. van Zeijl,et al.  A Multi-Standard Digital Envelope Modulator for Polar Transmitters in 90nm CMOS , 2007, 2007 IEEE Radio Frequency Integrated Circuits (RFIC) Symposium.

[2]  Bruce A. Wooley,et al.  A Digitally Modulated Polar CMOS PA with 20MHz Signal BW , 2007, 2007 IEEE International Solid-State Circuits Conference. Digest of Technical Papers.

[3]  Maryam Rofougaran,et al.  A Novel DAC Based Switching Power Amplifier for Polar Transmitter , 2006, IEEE Custom Integrated Circuits Conference 2006.

[4]  Aarno Pärssinen,et al.  A Multimode Transmitter in 0.13 $\mu\hbox{m}$ CMOS Using Direct-Digital RF Modulator , 2007, IEEE Journal of Solid-State Circuits.

[5]  O. Moreira-Tamayo,et al.  All-digital TX frequency synthesizer and discrete-time receiver for Bluetooth radio in 130-nm CMOS , 2004, IEEE Journal of Solid-State Circuits.

[6]  J. Yuan,et al.  A 10-bit wide-band CMOS direct digital RF amplitude modulator , 2003, IEEE J. Solid State Circuits.