Mixed culture polyhydroxyalkanoates production from sugar molasses: the use of a 2-stage CSTR system for culture selection.

Polyhydroxyalkanoates (PHAs) are promising biodegradable polymers. The use of mixed microbial cultures (MMC) and low cost feedstocks have a positive impact on the cost-effectiveness of the process. It has typically been carried out in Sequencing Batch Reactors (SBR). In this study, a 2-stage CSTR system (under Feast and Famine conditions) was used to effectively select for PHA-storing organisms using fermented molasses as feedstock. The effect of influent substrate concentration (60-120 Cmmol VFA/L) and HRT ratio between the reactors (0.2-0.5h/h) on the system's selection efficiency was assessed. It was shown that Feast reactor residual substrate concentration impacted on the selective pressure for PHA storage (due to substrate-dependent kinetic limitation). Moreover, a residual substrate concentration coming from the Feast to the Famine reactor did not jeopardize the physiological adaptation required for enhanced PHA storage. The culture reached a maximum PHA content of 61%. This success opens new perspectives to the use of wastewater treatment infrastructure for PHA production, thus valorizing either excess sludge or wastewaters.

[1]  Davide Dionisi,et al.  Biodegradable polymers from organic acids by using activated sludge enriched by aerobic periodic feeding. , 2004, Biotechnology and bioengineering.

[2]  Rui Oliveira,et al.  Mathematical modelling of a mixed culture cultivation process for the production of polyhydroxybutyrate. , 2005, Biotechnology and bioengineering.

[3]  M A M Reis,et al.  Strategies for the development of a side stream process for polyhydroxyalkanoate (PHA) production from sugar cane molasses. , 2007, Journal of biotechnology.

[4]  M. Reis,et al.  Strategies for PHA production by mixed cultures and renewable waste materials , 2008, Applied Microbiology and Biotechnology.

[5]  D. Dionisi,et al.  Exploiting olive oil mill effluents as a renewable resource for production of biodegradable polymers through a combined anaerobic-aerobic process , 2009 .

[6]  M. Reis,et al.  Polyhydroxyalkanoate (PHA) production by a mixed microbial culture using sugar molasses: effect of the influent substrate concentration on culture selection. , 2010, Water research.

[7]  Rashmi,et al.  Polyhydroxyalkanoates: an overview. , 2003, Bioresource technology.

[8]  Maria A M Reis,et al.  Synthesis of polyhydroxyalkanoates from different short-chain fatty acids by mixed cultures submitted to aerobic dynamic feeding. , 2006, Journal of biotechnology.

[9]  M. Majone,et al.  Influence of storage on kinetic selection to control aerobic filamentous bulking , 1996 .

[10]  J J Heijnen,et al.  Glycogen metabolism in aerobic mixed cultures. , 2001, Biotechnology and bioengineering.

[11]  J. Heijnen,et al.  Importance of bacterial storage polymers in bioprocesses , 1997 .

[12]  Magnus Christensson,et al.  Production of polyhydroxyalkanoates by activated sludge treating a paper mill wastewater. , 2008, Bioresource technology.

[13]  Sang Yup Lee,et al.  Process analysis and economic evaluation for Poly(3-hydroxybutyrate) production by fermentation , 1997 .

[14]  Rui Oliveira,et al.  Optimization of polyhydroxybutyrate production by mixed cultures submitted to aerobic dynamic feeding conditions , 2004, Biotechnology and bioengineering.

[15]  J. J. Heijnen,et al.  Poly-β-hydroxybutyrate metabolism in dynamically fed mixed microbial cultures , 2002 .

[16]  Gerard Muyzer,et al.  Enrichment of a mixed bacterial culture with a high polyhydroxyalkanoate storage capacity. , 2009, Biomacromolecules.

[17]  Kim,et al.  Production of poly(3-hydroxybutyrate) from inexpensive substrates. , 2000, Enzyme and microbial technology.

[18]  D. Dionisi,et al.  Olive oil mill effluents as a feedstock for production of biodegradable polymers. , 2005, Water research.

[19]  M. V. van Loosdrecht,et al.  Model‐based data evaluation of polyhydroxybutyrate producing mixed microbial cultures in aerobic sequencing batch and fed‐batch reactors , 2009, Biotechnology and bioengineering.

[20]  Xiong Zheng,et al.  Efficient polyhydroxyalkanoates production from a waste-activated sludge alkaline fermentation liquid by activated sludge submitted to the aerobic feeding and discharge process. , 2009, Environmental science & technology.

[21]  K. Sudesh,et al.  Biosynthesis of polyhydroxyalkanoate copolymers from mixtures of plant oils and 3-hydroxyvalerate precursors. , 2008, Bioresource technology.

[22]  João M. L. Dias,et al.  Recent advances in polyhydroxyalkanoate production by mixed aerobic cultures: from the substrate to the final product. , 2006, Macromolecular bioscience.

[23]  Rui Oliveira,et al.  Metabolic modelling of polyhydroxyalkanoate copolymers production by mixed microbial cultures , 2008, BMC Systems Biology.

[24]  Karl Englund,et al.  Synthesis of Polyhydroxyalkanoates in Municipal Wastewater Treatment , 2007, Water environment research : a research publication of the Water Environment Federation.

[25]  D. Dionisi,et al.  Effect of the applied organic load rate on biodegradable polymer production by mixed microbial cultures in a sequencing batch reactor. , 2006, Biotechnology and bioengineering.

[26]  Ashok K. Srivastava,et al.  Recent advances in microbial polyhydroxyalkanoates , 2005 .

[27]  Mauro Majone,et al.  A bulking sludge with high storage response selected under intermittent feeding , 1998 .

[28]  J J Heijnen,et al.  Simultaneous storage and degradation of PHB and glycogen in activated sludge cultures. , 2001, Water research.