Observing Oxygen Vacancy Driven Electroforming in Pt-TiO2-Pt Device via Strong Metal Support Interaction.

Oxygen vacancy formation, migration, and subsequent agglomeration into conductive filaments in transition metal oxides under applied electric field is widely believed to be responsible for electroforming in resistive memory devices, although direct evidence of such a pathway is lacking. Here, by utilizing strong metal-support interaction (SMSI) between Pt and TiO2, we observe via transmission electron microscopy the electroforming event in lateral Pt/TiO2/Pt devices where the atomic Pt from the electrode itself acts as a tracer for the propagating oxygen vacancy front. SMSI, which originates from the d-orbital overlap between Pt atom and the reduced cation of the insulating oxide in the vicinity of oxygen vacancies, was optimized by fabricating nanoscale devices causing Pt atom migration tracking the moving oxygen vacancy front from the anode to cathode during electroforming. Experiments performed in different oxidizing and reducing conditions, which tune SMSI in the Pt-TiO2 system, further confirmed the role of oxygen vacancies during electroforming. These observations also demonstrate that the noble metal electrode may not be as inert as previously assumed.

[1]  N. Klein,et al.  The maximum dielectric strength of thin silicon oxide films , 1966 .

[2]  Wei D. Lu,et al.  Electrochemical dynamics of nanoscale metallic inclusions in dielectrics , 2014, Nature Communications.

[3]  Chengqing Hu,et al.  Highly controllable and stable quantized conductance and resistive switching mechanism in single-crystal TiO2 resistive memory on silicon. , 2014, Nano letters.

[4]  Taketoshi Minato,et al.  Creation of single oxygen vacancy on titanium dioxide surface , 2012 .

[5]  R. Waser,et al.  Nanoionics-based resistive switching memories. , 2007, Nature materials.

[6]  C. Yoshida,et al.  High speed resistive switching in Pt∕TiO2∕TiN film for nonvolatile memory application , 2007 .

[7]  J Joshua Yang,et al.  Memristive devices for computing. , 2013, Nature nanotechnology.

[8]  M. V. Ganduglia-Pirovano,et al.  Oxygen vacancies in transition metal and rare earth oxides: Current state of understanding and remaining challenges , 2007 .

[9]  H. Hwang,et al.  Three‐Dimensional Integration of Organic Resistive Memory Devices , 2010, Advanced materials.

[10]  Annabella Selloni,et al.  Surface and subsurface oxygen vacancies in anatase TiO 2 and differences with rutile , 2009 .

[11]  S. O. Park,et al.  Electrical observations of filamentary conductions for the resistive memory switching in NiO films , 2006 .

[12]  Cheol Seong Hwang,et al.  A Resistive Memory in Semiconducting BiFeO3 Thin‐Film Capacitors , 2011, Advanced materials.

[13]  M. Zhang,et al.  Study of high-temperature hydrogen reduced Pt0/TiO2 by X-ray photoelectron spectroscopy combined with argon ion sputtering—Diffusion-encapsulation effect in relation to strong metal–support interaction , 2012 .

[14]  R. Agarwal,et al.  Real-Time Observation of Morphological Transformations in II-VI Semiconducting Nanobelts via Environmental Transmission Electron Microscopy. , 2015, Nano letters.

[15]  Sung-Wook Nam,et al.  Electrical Wind Force–Driven and Dislocation-Templated Amorphization in Phase-Change Nanowires , 2012, Science.

[16]  R. Dittmann,et al.  Redox‐Based Resistive Switching Memories – Nanoionic Mechanisms, Prospects, and Challenges , 2009, Advanced materials.

[17]  Yuchao Yang,et al.  Observation of conducting filament growth in nanoscale resistive memories , 2012, Nature Communications.

[18]  R. Waser,et al.  Coexistence of Bipolar and Unipolar Resistive Switching Behaviors in a Pt ∕ TiO2 ∕ Pt Stack , 2007 .

[19]  B. Delley,et al.  Role of Oxygen Vacancies in Cr‐Doped SrTiO3 for Resistance‐Change Memory , 2007, 0707.0563.

[20]  R. Waser,et al.  Characteristic electroforming behavior in Pt/TiO2/Pt resistive switching cells depending on atmosphere , 2008 .

[21]  S. C. Fung,et al.  Strong interactions in supported-metal catalysts. , 1981, Science.

[22]  Qiuye Li,et al.  Effect of photocatalytic activity of CO oxidation on Pt/TiO2 by strong interaction between Pt and TiO2 under oxidizing atmosphere , 2006 .

[23]  Jae Hyuck Jang,et al.  Atomic structure of conducting nanofilaments in TiO2 resistive switching memory. , 2010, Nature nanotechnology.

[24]  R. Agarwal,et al.  Direct observation of metal-insulator transition in single-crystalline germanium telluride nanowire memory devices prior to amorphization. , 2014, Nano letters.

[25]  Jie-Sheng Chen,et al.  Self-modification of titanium dioxide materials by Ti3+ and/or oxygen vacancies: new insights into defect chemistry of metal oxides , 2014 .

[26]  M. Yun,et al.  Variation of switching mechanism in TiO2 thin film resistive random access memory with Ag and graphene electrodes , 2013 .

[27]  Ulrike Diebold,et al.  The surface science of titanium dioxide , 2003 .

[28]  S. C. Fung,et al.  Strong metal-support interactions. Group 8 noble metals supported on titanium dioxide , 1978 .

[29]  M. Haruta,et al.  The influence of the preparation methods on the catalytic activity of platinum and gold supported on TiO2 for CO oxidation , 1997 .

[30]  C. N. Lau,et al.  The mechanism of electroforming of metal oxide memristive switches , 2009, Nanotechnology.