Materials and technologies for fabrication of three-dimensional microstructures with sub-100 nm feature sizes by two-photon polymerization

The fabrication of sub-100 nm feature sizes in large-scale three-dimensional (3D) geometries by two-photon polymerization requires a precise control of the polymeric reactions as well as of the intensity distribution of the ultrashort laser pulses. The authors, therefore, investigate the complex interplay of photoresist, processing parameters, and focusing optics. New types of inorganic– organic hybrid polymers are synthesized and characterized with respect to achievable structure sizes and their degree of crosslinking. For maintaining diffraction-limited focal conditions within the 3D processing region, a special hybrid optics is developed, where spatial and chromatic aberrations are compensated by a diffractive optical element. Feature sizes below 100 nm are demonstrated.

[1]  Boris N. Chichkov,et al.  Rapid prototyping of ossicular replacement prostheses , 2007 .

[2]  T Wilson,et al.  Refractive-index-mismatch induced aberrations in single-photon and two-photon microscopy and the use of aberration correction. , 2001, Journal of biomedical optics.

[3]  Jennifer L. West,et al.  Three-dimensional micropatterning of bioactive hydrogels via two-photon laser scanning photolithography for guided 3D cell migration. , 2008, Biomaterials.

[4]  B. Goldberg,et al.  High spatial resolution subsurface microscopy , 2001 .

[5]  G. Kino,et al.  High-density optical recording using a solid immersion lens. , 1997, Applied optics.

[6]  Saulius Juodkazis,et al.  Three-dimensional microfabrication of materials by femtosecond lasers for photonics applications , 2009 .

[7]  G. Kino,et al.  Solid immersion microscope , 1990 .

[8]  M. Wegener,et al.  Two‐Component Polymer Scaffolds for Controlled Three‐Dimensional Cell Culture , 2011, Advanced materials.

[9]  Hong‐Bo Sun,et al.  Three-dimensional focal spots related to two-photon excitation , 2002 .

[10]  Andreas Tünnermann,et al.  Hybrid optics for focusing ultrashort laser pulses. , 2006, Optics letters.

[11]  Anja Haase,et al.  Functional polymers by two-photon 3D lithography , 2007 .

[12]  J. .. Woehl,et al.  Realistic modeling of the illumination point spread function in confocal scanning optical microscopy. , 2010, Journal of the Optical Society of America. A, Optics, image science, and vision.

[13]  Mangirdas Malinauskas,et al.  A femtosecond laser-induced two-photon photopolymerization technique for structuring microlenses , 2010 .

[14]  Thomas Stichel,et al.  Multi-photon polymerization of inorganic-organic hybrid polymers using visible or IR ultrafast laser pulses for optical or optoelectronic devices , 2010, MOEMS-MEMS.

[15]  Woo Soo Kim,et al.  Impact of photoinitiators on the photopolymerization and the optical properties of inorganic-organic hybrid polymers , 2004 .

[16]  G. Kim,et al.  Three-dimensional direct laser writing inspired by stimulated-emission-depletion microscopy , 2013 .

[17]  Seth R. Marder,et al.  Two-photon polymerization initiators for three-dimensional optical data storage and microfabrication , 1999, Nature.

[18]  Martin Wegener,et al.  Three-dimensional direct laser writing inspired by stimulated-emission-depletion microscopy [Invited] , 2011, 1105.5703.

[19]  Robert R McLeod,et al.  Two-Color Single-Photon Photoinitiation and Photoinhibition for Subdiffraction Photolithography , 2009, Science.

[20]  Georg von Freymann,et al.  The Materials Challenge in Diffraction‐Unlimited Direct‐Laser‐Writing Optical Lithography , 2010, Advanced materials.

[21]  Bennett B. Goldberg,et al.  Theoretical analysis of numerical aperture increasing lens microscopy , 2005 .

[22]  Gerhard,et al.  Two-Photon Polymerization of Inorganic-Organic Hybrid Polymers as Scalable Technology Using Ultra-Short Laser Pulses , 2010 .

[23]  Matthew Lang,et al.  Geometrical analysis of third-order aberrations for a solid immersion lens. , 2008, Optics express.

[24]  Jang‐Ung Park,et al.  Inorganic–organic hybrid materials for application in optical devices , 2002 .

[25]  B. Chichkov,et al.  Three-dimensional photofabrication with femtosecond lasers for applications in photonics and biomedicine , 2007 .

[26]  Barbara Stadlober,et al.  Hybrid polymers as tunable and directly-patternable gate dielectrics in organic thin-film transistors , 2006 .

[27]  R. Gadonas,et al.  Femtosecond laser polymerization of hybrid/integrated micro-optical elements and their characterization , 2010 .

[28]  B. Chichkov,et al.  Two photon induced polymerization of organic-inorganic hybrid biomaterials for microstructured medical devices. , 2006, Acta biomaterialia.

[29]  Boris N. Chichkov,et al.  Biocompatibility of CAD/CAM ORMOCER polymer scaffold structures , 2004 .

[30]  D. Gerthsen,et al.  Photonic metamaterials by direct laser writing , 2009, 2009 Conference on Lasers and Electro-Optics and 2009 Conference on Quantum electronics and Laser Science Conference.

[31]  Aleksandr Ovsianikov,et al.  Investigations on the generation of photonic crystals using two-photon polymerization (2PP) of inorganic-organic hybrid polymers with ultra-short laser pulses , 2007 .

[32]  Gregor Langer,et al.  Optical Waveguides Embedded in PCBs - A Real World Application of 3D Structures Written by TPA , 2007 .

[33]  Satoshi Kawata,et al.  Finer features for functional microdevices , 2001, Nature.

[34]  Saulius Juodkazis,et al.  Photopolymerized microscopic vortex beam generators: Precise delivery of optical orbital angular momentum , 2010 .

[35]  S. Amberg-schwab,et al.  Functionalized coating materials based on inorganic-organic polymers , 1999 .

[36]  David J. Hagan,et al.  Two-photon absorption cross-sections of common photoinitiators , 2004 .

[37]  Shoji Maruo,et al.  Three-dimensional microfabrication with two-photon absorbed photopolymerization , 1996, International Commission for Optics.

[38]  S. Juodkazis,et al.  Three-dimensional micro-/nano-structuring via direct write polymerization with picosecond laser pulses. , 2011, Optics express.

[39]  M. Wegener,et al.  Direct laser writing of three-dimensional photonic-crystal templates for telecommunications , 2004, Nature materials.