Multi input–single output models identification of tower bridge movements using GPS monitoring system

Abstract In this paper, RTK-GPS system was used for movement data collection. Two identification models namely; Multi input–single output (MISO) robust fit regression and Neural Network Auto-Regression Moving Average with eXogenous input (NNARMAX) models were used for the identification of these data. The analysis of test results indicate that: (1) the NNARMAX [4 4 1 1] and [5 4 1 5] models defined by taking into account the results of robust regression analysis estimate structural movements more accurately than the NNARMAX [0 1 0 0] model, and (2) the robust fit regression models have good capacities for mapping relationship of applied loads effects factors and displacements of tower. However, temperature and humidity effects on the entire modal shapes are insignificant and (3) the traffic loads are the main factor affects tower bridge displacement.

[1]  Mosbeh R. Kaloop,et al.  Bridge safety monitoring based-GPS technique: case study Zhujiang Huangpu Bridge , 2012 .

[2]  U. Ligges.  Review of An R and S-PLUS companion to applied regression by J. Fox, Sage Publications, Thousand Oaks, California 2002 , 2003 .

[3]  Filipe Magalhães,et al.  Challenges in the Application of Stochastic Modal Identification Methods to a Cable-Stayed Bridge , 2007 .

[4]  Mosbeh R. Kaloop,et al.  GPS-structural health monitoring of a long span bridge using neural network adaptive filter , 2014 .

[5]  Christiaan Heij,et al.  Introduction to Mathematical Systems Theory: Linear Systems, Identification and Control (Heig, C., et al; 2007) [Book Review] , 2006, IEEE Control Systems.

[6]  Yang Wang,et al.  Output-only modal identification of a cable-stayed bridge using wireless monitoring systems , 2008 .

[7]  Yvonne Freeh,et al.  An R and S–PLUS Companion to Applied Regression , 2004 .

[8]  Ingela Lind,et al.  Regressor and Structure Selection Uses of ANOVA in System Identification , 2006 .

[9]  B. Peeters,et al.  Vibration-based damage detection in civil engineering: excitation sources and temperature effects , 2001 .

[10]  Charles R. Farrar,et al.  Damage identification and health monitoring of structural and mechanical systems from changes in their vibration characteristics: A literature review , 1996 .

[11]  Issam E. Harik,et al.  Roebling Suspension Bridge. II: Ambient Testing and Live-Load Response , 2004 .

[12]  Hui Li,et al.  Modal identification of bridges under varying environmental conditions: Temperature and wind effects , 2009 .

[13]  Heiner Kuhlmann.  IMPORTANCE OF AUTOCORRELATION FOR PARAMETER ESTIMATION IN REGRESSION MODELS , 2001 .

[14]  Martin H. Trauth,et al.  MATLAB® Recipes for Earth Sciences , 2021, Springer Textbooks in Earth Sciences, Geography and Environment.

[15]  L. Xu,et al.  TIME–FREQUENCY ANALYSIS OF A SUSPENSION BRIDGE BASED ON GPS , 2002 .

[16]  Gary C. Hart,et al.  System Identification in Structural Dynamics , 1977 .

[17]  Michel Gevers,et al.  Identification of multi-input systems: variance analysis and input design issues , 2006, Autom..

[18]  Kotaro Hirasawa,et al.  A homotopy approach to improving PEM identification of ARMAX models , 2001, Autom..

[19]  Yong-Lin Pi,et al.  Modal Identification of Vibrating Structures Using ARMA Model , 1989 .

[20]  Hang Guo,et al.  Application of Wavelet Analysis to GPS Deformation Monitoring , 2006, 2006 IEEE/ION Position, Location, And Navigation Symposium.

[21]  Joonryong Jeon,et al.  A smart monitoring system based on ubiquitous computing technique for infra-structural system: Centering on identification of dynamic characteristics of self-anchored suspension bridge , 2009 .

[22]  Han-Fu Chen,et al.  Introduction to Mathematical Systems Theory: Linear Systems, Identification and Control (Heig, C., et al; 2007) [Book Review] , 2008 .

[23]  Mosbeh R. Kaloop,et al.  Monitoring of bridge deformation using GPS technique , 2009 .