Thermomechanical Modeling of Additive Manufacturing Large Parts

[1]  Lars-Erik Lindgren,et al.  FINITE ELEMENT MODELING AND SIMULATION OF WELDING PART 1: INCREASED COMPLEXITY , 2001 .

[2]  Karen M. Taminger,et al.  Electron Beam Freeform Fabrication: A Rapid Metal Deposition Process , 2003 .

[3]  E. Friedman.  Thermomechanical Analysis of the Welding Process Using the Finite Element Method , 1975 .

[4]  T. Narayanan,et al.  Finite element analysis of temperature distribution during arc welding using adaptive grid technique , 1996 .

[5]  P. Tekriwal,et al.  Finite Element Analysis of Three-Dimensional Transient Heat Transfer in GMA Welding The data generated in this study can be used to determine the heating and cooling rate, weld pool shape and HAZ , 1988 .

[6]  Koichi Masubuchi,et al.  Numerical analysis of thermal stresses during welding including phase transformation effects , 1982 .

[7]  Creto Augusto Vidal,et al.  Analysis and optimization of weakly coupled thermoelastoplastic systems with applications to weldment design , 1995 .

[8]  Miguel Cervera,et al.  Finite element modeling of multi-pass welding and shaped metal deposition processes , 2010 .

[9]  Pan Michaleris,et al.  Finite element modeling discretization requirements for the laser forming process , 2004 .

[10]  H. Runnemalm,et al.  Three-dimensional welding analysis using an adaptive mesh scheme ☆ , 2000 .

[11]  Radovan Kovacevic,et al.  Numerical Modeling of Heat Distribution in the Electron Beam Melting® of Ti-6Al-4V , 2013 .

[12]  Marco Picasso,et al.  An Anisotropic Error Indicator Based on Zienkiewicz-Zhu Error Estimator: Application to Elliptic and Parabolic Problems , 2002, SIAM J. Sci. Comput..

[13]  J.Arnold Free,et al.  Predicting residual stresses in multi-pass weldments with the finite element method☆☆☆ , 1989 .

[14]  Klaus-Jürgen Bathe,et al.  Error indicators and adaptive remeshing in large deformation finite element analysis , 1994 .

[15]  E. Collings,et al.  Materials Properties Handbook: Titanium Alloys , 1994 .

[16]  P. Colella,et al.  Local adaptive mesh refinement for shock hydrodynamics , 1989 .

[17]  Lu Zhang,et al.  Investigation of Lagrangian and Eulerian finite element methods for modeling the laser forming process , 2004 .

[18]  Kaspar Willam,et al.  Computational aspects of welding stress analysis , 1982 .

[19]  Alberto Cardona,et al.  Computational modelling of shaped metal deposition , 2011 .

[20]  M. Berger,et al.  Adaptive mesh refinement for hyperbolic partial differential equations , 1982 .

[21]  J. Beuth,et al.  Control of Residual Thermal Stresses in Shape Deposition Manufacturing , 1995 .

[22]  O. C. Zienkiewicz,et al.  A simple error estimator and adaptive procedure for practical engineerng analysis , 1987 .

[23]  J. Mei,et al.  Influence of position and laser power on thermal history and microstructure of direct laser fabricated Ti–6Al–4V samples , 2005 .

[24]  A. D. Gosman,et al.  AUTOMATIC RESOLUTION CONTROL FOR THE FINITE-VOLUME METHOD, PART 1: A-POSTERIORI ERROR ESTIMATES , 2000 .

[25]  Rémy Glardon,et al.  3D FE simulation for temperature evolution in the selective laser sintering process , 2004 .

[26]  Lin Li,et al.  Finite element modelling of substrate thermal distortion in direct laser additive manufacture of an aero-engine component , 2013 .

[27]  R. Fabbro,et al.  Analytical and numerical modelling of the direct metal deposition laser process , 2008 .

[28]  J. Goldak,et al.  A new finite element model for welding heat sources , 1984 .

[29]  Ninggang Shen,et al.  THERMAL MODELING OF ELECTRON BEAM ADDITIVE MANUFACTURING PROCESS - POWDER SINTERING EFFECTS , 2012 .

[30]  Lars-Erik Lindgren,et al.  FINITE ELEMENT MODELING AND SIMULATION OF WELDING. PART 2: IMPROVED MATERIAL MODELING , 2001 .

[31]  P. Michaleris.  Modeling metal deposition in heat transfer analyses of additive manufacturing processes , 2014 .

[32]  Marsha Berger,et al.  Three-Dimensional Adaptive Mesh Refinement for Hyperbolic Conservation Laws , 1994, SIAM J. Sci. Comput..

[33]  P. Michaleris,et al.  Residual stress and distortion modeling of electron beam direct manufacturing Ti-6Al-4V , 2015 .

[34]  Mohammad Pervez Mughal,et al.  Three-Dimensional Finite-Element Modelling of Deformation in Weld-Based Rapid Prototyping , 2006 .

[35]  B. Andersson,et al.  Thermal Stresses in a Submerged-Arc Welded Joint Considering Phase Transformations , 1978 .

[36]  Adam C. Woodbury,et al.  Adaptive mesh coarsening for quadrilateral and hexahedral meshes , 2010 .

[37]  Paul A. Colegrove,et al.  Thermo-mechanical analysis of Wire and Arc Additive Layer Manufacturing process on large multi-layer parts , 2011 .

[38]  Mats Näsström,et al.  Simulation of multipass welding of a thick plate , 1999 .

[39]  Pedro V. Marcal,et al.  A NUMERICAL THERMO-MECHANICAL MODEL FOR THE WELDING AND SUBSEQUENT LOADING OF A FABRICATED STRUCTURE , 1973 .

[40]  Lars-Erik Lindgren,et al.  Modelling of metal deposition , 2011 .

[41]  John Goldak,et al.  An Integrated Computational Welding Mechanics With Direct-Search Optimization for Mitigation of Distortion in an Aluminum Bar Using Side Heating , 2014 .

[42]  Cristina H. Amon,et al.  Residual stress-induced warping in direct metal solid freeform fabrication , 2002 .

[43]  Lars-Erik Lindgren,et al.  FINITE ELEMENT MODELING AND SIMULATION OF WELDING. PART 3: EFFICIENCY AND INTEGRATION , 2001 .