Optimization adsorption of lead (II) using Aceh natural-bentonite by response surface methodology

Response Surface Methodology was employed for the removal of lead on synthetic water. The process parameters including bentonite mass (0.5; 1.25; 2.0 g), lead concentration (10; 55; 100 mg/L), and agitation time (5; 17.5; 30 minutes) were optimized using statistical Box-Behnken Design. The experimental data were obtained and analyzed by analysis of variance (ANOVA) and fit to a quadratic polynomial equation (Regression Analysis, R2 = 0.9996) for 17 runs experiment and 5 runs of the central-point (confidence level at 95%). The numerical optimation was used to identify the optimum condition for maximum removal of lead. The maximum adsorption efficiency expressed as the adsorption capacity, which was found to be 7.42 mg/L, at agitation time 17.5 minutes and adsorbent dosage 2.0 g.

[1]  H. Husin,et al.  Removal of Fe (II) in groundwater using rice husk-sourced biosorbent in continuous column adsorption , 2019, Journal of Physics: Conference Series.

[2]  P. N. Alam,et al.  Nano-bentonite as a low-cost adsorbent for removal of mercury from aqueous solution , 2019, Journal of Physics: Conference Series.

[3]  A. Garg,et al.  Adsorption and oxidation of ciprofloxacin in a fixed bed column using activated sludge derived activated carbon. , 2019, Journal of environmental management.

[4]  R. Hasan,et al.  Removal of Pb(II) from aqueous solution using KCC-1: Optimization by response surface methodology (RSM) , 2019, Journal of King Saud University - Science.

[5]  Diah Ayu Retnani Wulandari,et al.  Adsorpsi Methyl Violet oleh Karbon Aktif dari Limbah Tempurung Kelapa dengan Aktivator ZnCl2 Menggunakan Pemanasan Gelombang Mikro , 2018, Jurnal Rekayasa Kimia & Lingkungan.

[6]  A. Naghizadeh,et al.  Optimization of humic acid removal by adsorption onto bentonite and montmorillonite nanoparticles , 2018 .

[7]  A. Mohammed,et al.  Bentonite coated with magnetite Fe3O4 nanoparticles as a novel adsorbent for copper (II) ions removal from water/wastewater , 2018 .

[8]  C. Guria,et al.  Synthesis, characterization and performance studies of mixed-matrix poly(vinyl chloride)-bentonite ultrafiltration membrane for the treatment of saline oily wastewater , 2018 .

[9]  S. Nousir,et al.  Intrinsic affinity of acid-activated bentonite towards hydrogen and carbon dioxide , 2018 .

[10]  H. Owada,et al.  Evaluation of specific surface area of bentonite-engineered barriers for Kozeny-Carman law , 2017, Soils and Foundations.

[11]  Enshirah Da’na Adsorption of heavy metals on functionalized-mesoporous silica: A review , 2017 .

[12]  B. Makhoukhi,et al.  Adsorption of Bezathren dyes onto sodic bentonite from aqueous solutions , 2017 .

[13]  Shaoxian Song,et al.  A review on heavy metal ions adsorption from water by graphene oxide and its composites , 2017 .

[14]  Erni Misran,et al.  Pemanfaatan Karbon Aktif dari Ampas Teh sebagai Adsorben pada Proses Adsorpsi β-Karoten yang Terkandung dalam Minyak Kelapa Sawit Mentah , 2016 .

[15]  Yan Jiang,et al.  Adsorption performance and mechanism of bentonite modified by ammonium bromide for gas-phase elemental mercury removal , 2014 .

[16]  Farshad Rahimpour,et al.  A modeling study by response surface methodology (RSM) and artificial neural network (ANN) on Cu2+ adsorption optimization using light expended clay aggregate (LECA) , 2014 .

[17]  S. Tabatabaei,et al.  Immobilization of leachate's heavy metals using soil-zeolite column , 2013, International Journal Of Recycling of Organic Waste in Agriculture.

[18]  Akwasi A Boateng,et al.  Heavy metal and phenol adsorptive properties of biochars from pyrolyzed switchgrass and woody biomass in correlation with surface properties. , 2013, Journal of environmental management.

[19]  MeurisGurgel Carlos da Silva,et al.  Preparation and characterization of a Brazilian bentonite clay for removal of copper in porous beds , 2011 .

[20]  C. Futalan,et al.  Fixed-bed column studies on the removal of copper using chitosan immobilized on bentonite , 2011 .