Investigating the Use Of Portable Air Pollution Sensors to Capture the Spatial Variability Of Traffic-Related Air Pollution.

Advances in microsensor technologies for air pollution monitoring encourage a growing use of portable sensors. This study aims at testing their performance in the development of exposure surfaces for nitrogen dioxide (NO2) and ozone (O3). In Montreal, Canada, a data-collection campaign was conducted across three seasons in 2014 for 76 sites spanning the range of land uses and built environments of the city; each site was visited from 6 to 12 times, for 20 min, using NO2 and O3 sensors manufactured by Aeroqual. Land-use regression models were developed, achieving R(2) values of 0.86 for NO2 and 0.92 for O3 when adjusted for regional meteorology to control for the fact that all of the locations were not monitored at the same time. A total of two exposure surfaces were then developed for NO2 and O3 as averages over spring, summer, and fall. Validation against the fixed-station data and previous campaigns suggests that Aeroqual sensors tend to overestimate the highest NO2 and O3 concentrations, thus increasing the range of values across the city. However, the sensors suggest a good performance with respect to capturing the spatial variability in NO2 and O3 and are very convenient to use, having great potential for capturing temporal variability.

[1]  Ming Shan,et al.  A feasibility study of the association of exposure to biomass smoke with vascular function, inflammation, and cellular aging. , 2014, Environmental research.

[2]  Roderic L. Jones,et al.  An ozone monitoring instrument based on the tungsten trioxide (WO3) semiconductor , 2006 .

[3]  Altaf Arain,et al.  A Land Use Regression Model for Predicting Ambient Concentrations of Nitrogen Dioxide in Hamilton, Ontario, Canada , 2006, Journal of the Air & Waste Management Association.

[4]  Simon Kingham,et al.  Mapping Urban Air Pollution Using GIS: A Regression-Based Approach , 1997, Int. J. Geogr. Inf. Sci..

[5]  Michael Brauer,et al.  Application of land use regression to estimate long-term concentrations of traffic-related nitrogen oxides and fine particulate matter. , 2007, Environmental science & technology.

[6]  Yasmen A. Mustafa,et al.  Measurement of Ground Level Ozone at Different Locations , 2012 .

[7]  Chun Lin,et al.  Evaluation and calibration of Aeroqual Series 500 portable gas sensors for accurate measurement of ambient ozone and nitrogen dioxide , 2015 .

[8]  Marianne Hatzopoulou,et al.  Exposure to traffic-related air pollution during physical activity and acute changes in blood pressure, autonomic and micro-vascular function in women: a cross-over study , 2014, Particle and Fibre Toxicology.

[9]  J. Salmond,et al.  Validation of low-cost ozone measurement instruments suitable for use in an air-quality monitoring network , 2013 .

[10]  John D. Spengler,et al.  Ability of Fixed Monitoring Stations to Represent Personal Carbon Monoxide Exposure , 1976 .

[11]  Gina Solomon,et al.  Pollution prevention at ports: clearing the air , 2004 .

[12]  Mark S Goldberg,et al.  Assessing Spatial Variability of Ambient Nitrogen Dioxide in Montréal, Canada, with a Land-Use Regression Model , 2005, Journal of the Air & Waste Management Association.

[13]  Michael Brauer,et al.  Within-urban variability in ambient air pollution: Comparison of estimation methods , 2008 .

[14]  C. Chan,et al.  Human exposure to respirable suspended particulate and airborne lead in different roadside microenvironments. , 2000, Chemosphere.

[15]  Vlad Isakov,et al.  Evaluation of land-use regression models used to predict air quality concentrations in an urban area , 2010 .

[16]  Pavlos S. Kanaroglou,et al.  Establishing an air pollution monitoring network for intra-urban population exposure assessment: A location-allocation approach , 2005 .

[17]  M. Brauer,et al.  A land use regression model for ultrafine particles in Vancouver, Canada. , 2013, Environmental science & technology.

[18]  Brigitte Roberge,et al.  Cross-sensitivities of electrochemical detectors used to monitor worker exposures to airborne contaminants: false positive responses in the absence of target analytes. , 2006, Journal of environmental monitoring : JEM.

[19]  J. Stetter,et al.  Amperometric gas sensors--a review. , 2008, Chemical reviews.

[20]  Marianne Hatzopoulou,et al.  Characterizing the spatial distribution of ambient ultrafine particles in Toronto, Canada: A land use regression model. , 2016, Environmental pollution.

[21]  Gb Stewart,et al.  The use of electrochemical sensors for monitoring urban air quality in low-cost, high-density networks , 2013 .

[22]  S. Jamieson.  In environmental monitoring, what you don't know can hurt you , 1992 .

[23]  Michael Jerrett,et al.  The use of wind fields in a land use regression model to predict air pollution concentrations for health exposure studies , 2007 .

[24]  E. Snyder,et al.  The changing paradigm of air pollution monitoring. , 2013, Environmental science & technology.

[25]  Russell Binions,et al.  Metal Oxide Semi-Conductor Gas Sensors in Environmental Monitoring , 2010, Sensors.

[26]  Naveen Eluru,et al.  Land-use and socio-economics as determinants of traffic emissions and individual exposure to air pollution , 2013 .

[27]  Dan L. Crouse,et al.  A prediction-based approach to modelling temporal and spatial variability of traffic-related air pollution in Montreal, Canada , 2009 .

[28]  L. Francioso,et al.  Chemiresistor gas sensors using semiconductor metal oxides , 2014 .

[29]  K. Elampari,et al.  Surface ozone variability in the southern most semi-urban area, Nagercoil, India , 2010, Recent Advances in Space Technology Services and Climate Change 2010 (RSTS & CC-2010).