Iron Corrosion Scales: Model for Scale Growth, Iron Release, and Colored Water Formation

This paper was presented in part by V. L. Snoeyink as the Simon W. Freese Lecture at the 2002 Canadian Society of Civil Engineers/Environmental and Water Resources Institute of ASCE Environmental Engineering Conference in Niagara Falls, Ontario, Canada, July 22, 2002. The interactions of corroded iron pipe surfaces with water are of importance because they can lead to serious water quality degradation and material deterioration. A conceptual model has been developed in this paper to describe the formation and growth of iron scales, and their reactions that lead to colored water problems. Most corrosion scales have characteristic structural features, such as a loosely held top surface layer, a shell-like layer ~s!, and a porous core. According to this model corrosion scales are expected to grow from inside the scale via the corrosion reaction, i.e., the conversion of iron metal to ferrous ion. The average oxidation state of iron increases with distance from the pipe wall. The scale structure and scale reactions permit the ferrous iron to be released to the bulk water, where it undergoes conversion to particulate ferric iron, which is the cause of colored water. Scale structure and composition play important roles in the reactions of iron scales that lead to iron release, and water quality control to decrease the porosity of the scale is an important means of reducing iron release. It is anticipated that the conceptual model presented here will be used as a basis for changing water quality to minimize colored water formation, and as a guide for further research.

[1]  P. Refait,et al.  Preparation and Eh--pH diagrams of Fe(II)--Fe(III) green rust compounds; hyperfine interaction characteristics and stoichiometry of hydroxy-chloride, -sulphate and -carbonate , 1998 .

[2]  W. Kriven,et al.  Physico-chemical characteristics of corrosion scales in old iron pipes. , 2001, Water research.

[3]  Vernon L. Snoeyink,et al.  The siderite model of the formation of corrosion-resistant scales , 1981 .

[4]  J. Génin,et al.  Hyperfine interactions and structures of ferrous hydroxide and green rust II in sulfated aqueous media , 1988 .

[5]  M. Cohen,et al.  The Nature of the Films Formed by Passivation of Iron with Solutions of Sodium Phosphate , 1952 .

[6]  M. Cohen,et al.  The Mechanism of the Inhibition of the Corrosion of Iron by Solutions of Sodium Orthophosphate , 1951 .

[7]  K. Goto,et al.  Effect of anions on the oxygenation of ferrous ion in neutral solutions , 1976 .

[8]  M. Abdelmoula,et al.  The preparation and thermodynamic properties of Fe(II)-Fe(III) hydroxide-carbonate (green rust 1) ; Pourbaix diagram of iron in carbonate-containing aqueous media , 1995 .

[9]  U. R. Evans,et al.  MECHANISM OF ATMOSPHERIC RUSTING , 1972 .

[10]  M. Abdelmoula,et al.  Mechanisms of formation and structure of green rust one in aqueous corrosion of iron in the presence of chloride ions , 1998 .

[11]  J. J. Morgan,et al.  Kinetics and product of ferrous iron oxygenation in aqueous systems , 1980 .

[12]  James M. Montgomery,et al.  Water Treatment Principles and Design , 1985 .

[13]  Thurston Eric Larson,et al.  Corrosion and Tuberculation of Cast Iron , 1957 .

[14]  Martin Stratmann,et al.  In situ Möβbauer spectroscopic study of reactions within rust layers , 1989 .

[15]  Z. Karim.  Characteristics of Ferrihydrites Formed by Oxidation of FeCl2 Solutions Containing Different Amounts of Silica , 1984 .

[16]  William H. Walker,et al.  THE CORROSION OF IRON AND STEEL. , 1912, Science.

[17]  R. M. Cornell,et al.  Phase transformations in the ferrihydrite/cysteine system , 1989 .

[18]  John R. Baylis,et al.  Prevention of Corrosion and “Red Water” , 1926 .

[19]  Standard potentials (Eo) of iron(III) oxides under reducing conditions , 1987 .

[20]  Martin Stratmann,et al.  An electrochemical study of phase-transitions in rust layers , 1983 .

[21]  U. R. Evans,et al.  Electrochemical Mechanism of Atmospheric Rusting , 1965, Nature.

[22]  G. Lee,et al.  Oxygenation of Ferrous Iron , 1961 .

[23]  Thurston Eric Larson,et al.  Corrosion by Water at Low Flow Velocity , 1954 .

[24]  R. Taylor.  Influence of Chloride on the Formation of Iron Oxides From Fe(II) Chloride. II. Effect of [Cl] on the Formation of Lepidocrocite and its Crystallinity , 1984 .

[25]  R. Tanner,et al.  Anaerobic oxidation of elemental metals coupled to methanogenesis by Methanobacterium thermoautotrophicum , 1992 .

[26]  Harvey M. Herro,et al.  The Nalco guide to cooling water system failure analysis : Nalco Chemical Company , 1993 .

[27]  F. Millero,et al.  The oxidation kinetics of Fe(II) in seawater , 1987 .

[28]  M. Cohen,et al.  The Inhibition of the Corrosion of Iron by Some Anodic Inhibitors , 1953 .

[29]  A. Kuch,et al.  INVESTIGATIONS OF THE REDUCTION AND RE-OXIDATION KINETICS OF IRON (III) OXIDE SCALES FORMED IN WATERS , 1988 .

[30]  U. Schwertmann,et al.  Iron Oxides , 2003, SSSA Book Series.

[31]  Waltraud M. Kriven,et al.  Iron Release from corroded, unlined cast‐iron pipe , 2003 .

[32]  Y. Tamaura,et al.  Studies on the oxidation of iron(II) ion during the formation of Fe3O4 and α-FeO(OH) by air oxidation of Fe[OH]2 suspensions , 1981 .

[33]  Martin Stratmann,et al.  The mechanism of the oxygen reduction on rust-covered metal substrates , 1994 .

[34]  U. Gunten,et al.  Primary products of the oxygenation of iron(II) at an oxic—anoxic boundary: Nucleation, aggregation, and aging , 1991 .

[35]  L. Daniels,et al.  Bacterial Methanogenesis and Growth from CO2 with Elemental Iron as the Sole Source of Electrons , 1987, Science.