论文信息 - GRANTECAN telescope M3 mirror manufacturing

GRANTECAN telescope M3 mirror manufacturing

LZOS is manufacturing the M3 Mirror flat surface for the GRANTECAN Project. The Mirror has an elliptical configuration and axial dimensions of 1521mm x 1073mm. The results of the M3 Mirror figuring and final polishing, testing in the Ritchey-Common layout at two 30° and 60° angles of incidence of a principal ray are presented in the manuscript.

[1] Vladimir E. Patrikeev,et al. Computer-controlled fabrication of large-size ground- and space-based optics from glass ceramic Sitall CO-115M , 1999, Optics + Photonics.

[2] Stefan Schulte,et al. Testing large plane mirrors with the Ritchey-Common test in two angular positions , 1999, Optical Systems Design.

[3] K L Shu. Ray-trace analysis and data reduction methods for the Ritchey-Common test. , 1983, Applied optics.

[4] J M Simon,et al. Testing of flat optical surfaces by the quantitative Foucault method. , 1978, Applied optics.

[5] Magomed A. Abdulkadyrov,et al. Manufacturing of primary mirrors from Sitall CO-115M for European projects TTL, NOA, and VST , 2001, Optics + Photonics.

[6] H D Polster. The common test for plane mirrors. , 1970, Applied optics.

[7] Nicholas Devaney,et al. Status of the design and fabrication of the GTC mirrors , 2000, Astronomical Telescopes and Instrumentation.

[8] Magomed A. Abdulkadyrov,et al. GRANTECAN telescope M3 mirror manufacturing , 2004, SPIE Astronomical Telescopes + Instrumentation.