STUDY ON HEAT TRANSFER AUGMENTATION IN AN AIR HEATER USING RECTANGULAR WAVY FIN TURBULATORS

In the present study, the use of wavy fin turbulators on the annulus body of a double pipe air heater has been numerically investigated. The inner pipe consists of hot water whereas the annular section consists of cold air whose Reynolds Number (Re) ranged from 3000-15,000. Rectangular cross-sectioned wavy fin turbulators with various curvature ratios of 2, 3, 5, and 7.5 is numerically simulated to investigate the influence of curvature effects on turbulence. Results have been compared with the bare pipe and with rectangular straight fins. It is seen that wavy fin turbulators perform better (compared to (other two) bare and rectangular straight fin) than both of them by creating turbulence effects in the flow field. Nusselt number (Nu) is increased by 256% and 51% as compared to bare and rectangular straight fin type. Parametric studies revealed that as the curvature ratio (CR) is reduced, the turbulent intensity and turbulent kinetic energy increase with better heat transfer characteristics. The highest Thermo hydraulic performance index of 4.8 is noticed for the CR of 2 at a Re of 6000 and is 34% higher than the straight rectangular fin.

[1]  Y. Sugimoto,et al.  EFFECT OF RIB HEIGHT ON HEAT TRANSFER ENHANCEMENT BY COMBINATION OF A RIB AND PULSATING FLOW , 2022, Frontiers in Heat and Mass Transfer.

[2]  M. Ibrahim,et al.  NUMERICAL THERMAL STUDY OF HEAT TRANSFER ENHANCEMENT IN LAMINAR-TURBULENT TRANSITION FLOW THROUGH ABSORBER PIPE OF PARABOLIC SOLAR TROUGH COLLECTOR SYSTEM , 2021, Frontiers in Heat and Mass Transfer.

[3]  L. Habeeb,et al.  PERFORMANCE EVALUATION OF A SOLAR WATER HEATER INTEGRATED WITH BUILT-IN THERMAL ENERGY STORAGE VIA POROUS MEDIA , 2021, Frontiers in Heat and Mass Transfer.

[4]  W. Jedsadaratanachai,et al.  THERMAL PERFORMANCE ASSESSMENT IN A CIRCULAR TUBE FITTED WITH VARIOUS SIZES OF MODIFIED V-BAFFLE: A NUMERICAL INVESTIGATION , 2021 .

[5]  P. Dinesha,et al.  Effect of hemispherical turbulators in a double-pipe heat exchanger for heat transfer augmentation , 2020 .

[6]  S. Eiamsa-ard,et al.  Fully developed periodic and thermal performance evaluation of a solar air heater channel with wavy-triangular ribs placed on an absorber plate , 2019, International Journal of Thermal Sciences.

[7]  P. Dinesha,et al.  Experimental and numerical analysis of cylindrical turbulators in a double pipe heat exchanger under turbulent flow conditions , 2019, Journal of Turbulence.

[8]  Manoj Kumar,et al.  Enhanced heat transfer and frictional losses in heat exchanger tube with modified helical coiled inserts , 2018 .

[9]  S. I. Gilani,et al.  Performance enhancement of free convective solar air heater by pin protrusions on the absorber , 2017 .

[10]  M. Manjunath,et al.  Numerical analysis of the influence of spherical turbulence generators on heat transfer enhancement of flat plate solar air heater , 2017 .

[11]  Anas El Maakoul,et al.  Numerical design and investigation of heat transfer enhancement and performance for an annulus with continuous helical baffles in a double-pipe heat exchanger , 2017 .

[12]  D. B. Zodpe,et al.  Experimental and CFD investigation of convection heat transfer in solar air heater with reverse L-shaped ribs , 2016 .

[13]  S. Chang,et al.  Thermal performances of turbulent tubular flows enhanced by ribbed and grooved wire coils , 2015 .

[14]  Sarmad A. Abdal Hussein,et al.  Experimental Investigation of Double Pipe Heat Exchanger by using Semi Circular Disc Baffles , 2015 .

[15]  Anil Singh Yadav,et al.  Artificially roughened solar air heater: Experimental investigations , 2014 .

[16]  Changying Zhao,et al.  A review of solar collectors and thermal energy storage in solar thermal applications , 2013 .

[17]  S. Eiamsa-ard,et al.  Thermohydraulic characteristics of co/counter swirl flow through a round tube fitted with helical screw tape and twisted tape , 2013 .

[18]  Nasrudin Abd Rahim,et al.  Review on solar air heating system with and without thermal energy storage system , 2012 .

[19]  S. Sarada,et al.  Enhancement of heat transfer using varying width twisted tape inserts , 2011 .

[20]  S. Eiamsa-ard,et al.  Thermohydraulic investigation of turbulent flow through a round tube equipped with twisted tapes consisting of centre wings and alternate-axes , 2010 .

[21]  Pongjet Promvonge,et al.  Heat transfer and pressure drop in a channel with multiple 60° V-baffles ☆ , 2010 .

[22]  Liangbi Wang,et al.  Convective Heat Transfer Enhancement in a Circular Tube Using Twisted Tape , 2009 .

[23]  R. Saini,et al.  Heat transfer and friction factor correlations for a duct having dimple-shape artificial roughness for solar air heaters , 2008 .

[24]  S. Suresh,et al.  Experimental studies on heat transfer and friction factor characteristics of laminar flow through a circular tube fitted with helical screw-tape inserts , 2006 .

[25]  A. Agrawal,et al.  Laminar flow and heat transfer in a finned tube annulus , 1990 .

[26]  F. Saboya,et al.  Turbulent heat transfer and pressure drop in pinned annular regions , 2000 .

[27]  H. Soliman,et al.  Analysis of fully developed laminar flow in longitudinal internally finned tubes , 1977 .