Technical performance of co-addition of SiC particulates and SiC whiskers in hot-pressed TiB2-based ultrahigh temperature ceramics

[1]  Seyed Ali Delbari,et al.  Densification behavior and microstructure development in TiB2 ceramics doped with h-BN , 2020 .

[2]  Shu Yan,et al.  Effects of SiC amount and morphology on the properties of TiB2-based composites sintered by hot-pressing , 2020 .

[3]  Mehdi Shahedi Asl,et al.  On the simulation of spark plasma sintered TiB2 ultra high temperature ceramics: A numerical approach , 2020 .

[4]  Seyed Ali Delbari,et al.  Strengthening of novel TiC–AlN ceramic with in-situ synthesized Ti3Al intermetallic compound , 2020 .

[5]  Mehdi Shahedi Asl,et al.  Densification and toughening mechanisms in spark plasma sintered ZrB2-based composites with zirconium and graphite additives , 2020 .

[6]  Seyed Ali Delbari,et al.  Strengthening of TiC ceramics sintered by spark plasma via nano-graphite addition , 2020 .

[7]  Mehdi Shahedi Asl,et al.  Preparation of B4C–SiC–HfB2 nanocomposite by mechanically activated combustion synthesis , 2020 .

[8]  Mehdi Shahedi Asl,et al.  Influence of SPS temperature on the properties of TiC–SiCw composites , 2020, Ceramics International.

[9]  Mehdi Shahedi Asl,et al.  Aluminum nitride as an alternative ceramic for fabrication of microchannel heat exchangers: A numerical study , 2020, Ceramics International.

[10]  Mehdi Shahedi Asl,et al.  Effects of graphite nano-flakes on thermal and microstructural properties of TiB2–SiC composites , 2020 .

[11]  Seyed Ali Delbari,et al.  Nano-diamond reinforced ZrB2–SiC composites , 2020, Ceramics International.

[12]  Zhenqin Li,et al.  Effect of sintering temperature and TiB2 content on the grain size of B4C-TiB2 composites , 2020, Materials Today Communications.

[13]  Mehdi Shahedi Asl,et al.  Role of graphite nano-flakes on the characteristics of ZrB2-based composites reinforced with SiC whiskers , 2020 .

[14]  Mehdi Shahedi Asl,et al.  Phase transformation in spark plasma sintered ZrB2–V–C composites at different temperatures , 2020 .

[15]  Seyed Ali Delbari,et al.  Triplet carbide composites of TiC, WC, and SiC , 2020 .

[16]  Mehdi Shahedi Asl,et al.  Advantages and disadvantages of graphite addition on the characteristics of hot-pressed ZrB2–SiC composites , 2020 .

[17]  Mehdi Shahedi Asl,et al.  Numerical modeling of heat transfer during spark plasma sintering of titanium carbide , 2020 .

[18]  Seyed Ali Delbari,et al.  Influence of TiB2 content on the properties of TiC–SiCw composites , 2020 .

[19]  Towhid Gholizadeh,et al.  A new trigeneration system for power, cooling, and freshwater production driven by a flash-binary geothermal heat source , 2020 .

[20]  M. Lance,et al.  Reaction-bond composite synthesis of SiC-TiB2 by spark plasma sintering/field-assisted sintering technology (SPS/FAST) , 2020 .

[21]  Mehdi Shahedi Asl,et al.  Combined role of SiC particles and SiC whiskers on the characteristics of spark plasma sintered ZrB2 ceramics , 2020 .

[22]  M. Vajdi,et al.  Fluid-structure interaction of blood flow around a vein valve , 2020, BioImpacts : BI.

[23]  Mehdi Shahedi Asl,et al.  Numerical simulation of heat transfer during spark plasma sintering of zirconium diboride , 2020, Ceramics International.

[24]  Mehdi Shahedi Asl,et al.  Hot pressing and oxidation behavior of ZrB2–SiC–TaC composites , 2020 .

[25]  Mehdi Shahedi Asl,et al.  Solid solution formation during spark plasma sintering of ZrB2–TiC–graphite composites , 2020 .

[26]  R. Telle.  The quasi ternary system TiB2-CrB2-WB2 between 1900 and 2300°C , 2020 .

[27]  E. A. Aghdam,et al.  Experimental study and comparison of the exhaust gas emissions response of a spark ignition engine to adding natural gas to gasoline in lean-burn condition , 2020 .

[28]  Seyed Ali Delbari,et al.  Characterization of triplet Ti–TiB–TiC composites: Comparison of in-situ formation and ex-situ addition of TiC , 2020, Ceramics International.

[29]  E. Ghasali,et al.  Production Methods of CNT-reinforced Al Matrix composites: A Review , 2020, Journal of Composites and Compounds.

[30]  Hao-wei Wang,et al.  Microstructures evolution of nano TiB2/7050Al composite during homogenization , 2020 .

[31]  Mehdi Shahedi Asl,et al.  Spark plasma sintering of quadruplet ZrB2–SiC–ZrC–Cf composites , 2020 .

[32]  G. Ji,et al.  A new powder metallurgy routine to fabricate TiB2/Al–Zn–Mg–Cu nanocomposites based on composite powders with pre-embedded nanoparticles , 2019 .

[33]  Mehdi Shahedi Asl,et al.  Co-reinforcing of mullite-TiN-CNT composites with ZrB2 and TiB2 compounds , 2019, Ceramics International.

[34]  Mehdi Shahedi Asl,et al.  Spark plasma sintering of TiC–SiCw ceramics , 2019, Ceramics International.

[35]  Mehdi Shahedi Asl,et al.  TiB2–SiC-based ceramics as alternative efficient micro heat exchangers , 2019, Ceramics International.

[36]  Mehdi Shahedi Asl,et al.  Heat transfer, thermal stress and failure analyses in a TiB2 gas turbine stator blade , 2019, Ceramics International.

[37]  Leila Bazli,et al.  A Review of Carbon nanotube/TiO2 Composite prepared via Sol-Gel method , 2019, Journal of Composites and Compounds.

[38]  Seyed Ali Delbari,et al.  Influence of Sintering Temperature on Microstructure and Mechanical Properties of Ti–Mo–B4C Composites , 2019, Metals and Materials International.

[39]  Seyed Ali Delbari,et al.  Hybrid Ti matrix composites with TiB2 and TiC compounds , 2019, Materials Today Communications.

[40]  G. Ji,et al.  Microstructure evolution of the TiB2/Al composites fabricated by powder metallurgy during hot extrusion , 2019, Materials Characterization.

[41]  M. G. Kakroudi,et al.  Investigation of AlN addition on the microstructure and mechanical properties of TiB2 ceramics , 2019, Ceramics International.

[42]  Mehdi Shahedi Asl,et al.  Preparation of mullite-TiB2-CNTs hybrid composite through spark plasma sintering , 2019, Ceramics International.

[43]  Shaikh Asad Ali Dilawary,et al.  Effect of TiB2 addition on the elevated temperature tribological behavior of spark plasma sintered Ti matrix composite , 2019, Composites Part B: Engineering.

[44]  Mehdi Shahedi Asl,et al.  A numerical approach to the heat transfer in monolithic and SiC reinforced HfB2, ZrB2 and TiB2 ceramic cutting tools , 2019, Ceramics International.

[45]  Mehdi Shahedi Asl,et al.  Microstructural, thermal and mechanical characterization of TiB2–SiC composites doped with short carbon fibers , 2019, International Journal of Refractory Metals and Hard Materials.

[46]  Mehdi Shahedi Asl,et al.  Pressureless sintering of ZrB2 ceramics codoped with TiC and graphite , 2019, International Journal of Refractory Metals and Hard Materials.

[47]  M. Ahmadian,et al.  Effects of SPS parameters on the densification and mechanical properties of TiB2-SiC composite , 2019, Ceramics International.

[48]  Seyed Ali Delbari,et al.  Reactive spark plasma sintering of TiB2–SiC–TiN novel composite , 2019, International Journal of Refractory Metals and Hard Materials.

[49]  Mehdi Shahedi Asl,et al.  Thermal diffusivity and microstructure of spark plasma sintered TiB2SiC Ti composite , 2019, Ceramics International.

[50]  Z. Fu,et al.  TEM characterization of a Supra-Nano-Dual-Phase binder phase in spark plasma sintered TiB2–5 wt%HEAs cermet , 2019, Ceramics International.

[51]  Seyed Ali Delbari,et al.  Influence of TiN dopant on microstructure of TiB2 ceramic sintered by spark plasma , 2019, Ceramics International.

[52]  Mehdi Shahedi Asl,et al.  Microstructure of spark plasma sintered TiB2 and TiB2–AlN ceramics , 2019 .

[53]  Seyed Ali Delbari,et al.  Spark plasma sintering of TiN ceramics codoped with SiC and CNT , 2019, Ceramics International.

[54]  Mehdi Shahedi Asl,et al.  Microstructure–mechanical properties correlation in spark plasma sintered Ti–4.8 wt.% TiB2 composites , 2019, Materials Chemistry and Physics.

[55]  Mehdi Shahedi Asl,et al.  Microstructure and thermomechanical characteristics of spark plasma sintered TiC ceramics doped with nano-sized WC , 2019, Ceramics International.

[56]  M. Vardelle,et al.  Spark plasma sintering and mechanical properties of compounds in TiB2-SiC pseudo-diagram , 2018, Ceramics International.

[57]  Mehdi Shahedi Asl,et al.  Phase evolution during spark plasma sintering of novel Si3N4-doped TiB2–SiC composite , 2018, Materials Characterization.

[58]  H. Esfahani,et al.  In-vitro electrochemical study of TiB/TiB2 composite coating on titanium in Ringer's solution , 2018, Journal of Alloys and Compounds.

[59]  S. Monteiro,et al.  Characterization of TiB2-AlN composites for application as cutting tool , 2018, Journal of Materials Research and Technology.

[60]  M. Schmidt,et al.  Densification, microstructure and properties of TiB2 ceramics fabricated by spark plasma sintering , 2018, Materials Characterization.

[61]  M. Rosinski,et al.  Structure and mechanical properties of TiB2/TiC – Ni composites fabricated by pulse plasma sintering method , 2018, Advanced Powder Technology.

[62]  Mehdi Shahedi Asl,et al.  Microstructural investigation of spark plasma sintered TiB2 ceramics with Si3N4 addition , 2018, Ceramics International.

[63]  Mehdi Shahedi Asl,et al.  A novel ZrB2–VB2–ZrC composite fabricated by reactive spark plasma sintering , 2018, Materials Science and Engineering: A.

[64]  Mehdi Shahedi Asl,et al.  Densification improvement of spark plasma sintered TiB2-based composites with micron-, submicron- and nano-sized SiC particulates , 2018, Ceramics International.

[65]  Z. Fu,et al.  Microstructure and mechanical behavior of spark plasma sintered TiB2/Fe-15Cr-8Al-20Mn composites , 2018 .

[66]  R. Koç,et al.  Pressureless sintering of TiB2 with low concentration of Co binder to achieve enhanced mechanical properties , 2018 .

[67]  Mehdi Shahedi Asl,et al.  Contribution of SiC particle size and spark plasma sintering conditions on grain growth and hardness of TiB2 composites , 2017 .

[68]  Mehdi Shahedi Asl,et al.  Effects of in-situ formed TiB whiskers on microstructure and mechanical properties of spark plasma sintered Ti–B4C and Ti–TiB2 composites , 2017 .

[69]  Mehdi Shahedi Asl,et al.  Effect of TiB2 content on the characteristics of spark plasma sintered Ti–TiBw composites , 2017 .

[70]  M. Somer,et al.  Production of TiB2 by SHS and HCl leaching at different temperatures: Characterization and investigation of sintering behavior by SPS , 2017 .

[71]  J. Ruan,et al.  Microstructure and mechanical properties of TiB2-based composites with high volume fraction of Fe-Ni additives prepared by vacuum pressureless sintering , 2017 .

[72]  Y. Sakka,et al.  Ultra-high elevated temperature strength of TiB2-based ceramics consolidated by spark plasma sintering , 2017 .

[73]  S. Monteiro,et al.  Development and evaluation of TiB2–AlN ceramic composites sintered by spark plasma , 2016 .

[74]  Mehdi Shahedi Asl,et al.  Characterization of hot pressed SiC whisker reinforced TiB2 based composites , 2016 .

[75]  Mehdi Shahedi Asl,et al.  Influence of silicon carbide addition on the microstructural development of hot pressed zirconium and titanium diborides , 2016 .

[76]  Y. Sakka,et al.  High-temperature reactive spark plasma consolidation of TiB2–NbC ceramic composites , 2015 .

[77]  Yucheng Wang,et al.  Fabrication and properties of TiB2-based cermets by spark plasma sintering with CoCrFeNiTiAl high-entropy alloy as sintering aid , 2015 .

[78]  A. Ataie,et al.  Synthesis and sintering of TiB2 nanoparticles , 2014 .

[79]  Chuanzhen Huang,et al.  Microstructure and mechanical properties of hot pressed TiB2–SiC composite ceramic tool materials at room and elevated temperatures , 2014 .

[80]  M. Öveçoğlu,et al.  Influence of TiB2 particle size on the microstructure and properties of Al matrix composites prepared via mechanical alloying and pressureless sintering , 2014 .

[81]  F. S. Jazi,et al.  Synthesis and Characterization of In Situ Al-Al13Fe4-Al2O3-TiB2 Nanocomposite Powder by Mechanical Alloying and Subsequent Heat Treatment , 2014 .

[82]  Chuanzhen Huang,et al.  Microstructure and mechanical properties of TiB2–SiC ceramic composites by Reactive Hot Pressing , 2014 .

[83]  P. Putyra,et al.  TiN–TiB2 composites prepared by various sintering techniques , 2013 .

[84]  R. Orrú,et al.  Effect of ball milling on reactive spark plasma sintering of B4C–TiB2 composites , 2012 .

[85]  A. Ataie,et al.  Sintering of Al2O3–TiB2 nano-composite derived from milling assisted sol–gel method , 2012 .

[86]  Zhu Jiao-qun,et al.  Rapid synthesis of Ti3AlC2/TiB2 composites by the spark plasma sintering (SPS) technique , 2009 .

[87]  A. K. Suri,et al.  Oxidation of monolithic TiB2 and TiB2-20 wt.% MoSi2 composite at 850 °C , 2006 .

[88]  A. Singh,et al.  Reaction sintering of NiAl and TiB2-NiAl composites under pressure , 1998 .

[89]  G. Fantozzi,et al.  Densification, microstructure and mechanical properties of TiB2-B4C based composites , 1996 .

[90]  S. Torizuka,et al.  Effect of SiC on Interfacial Reaction and Sintering Mechanism of TiB2 , 1995 .

[91]  M. Fukuhara,et al.  Physical properties and cutting performance of silicon nitride ceramic , 1985 .