Hydraulic systems control based on the characteristics of major-motion mechanism for an open-die forging manipulator

In the open-die forging process, the forging manipulator must cooperate closely with the forging press. Terrible working conditions of open-die forging have resulted in significant demand on the hydraulic control systems of the forging manipulator. This article analyzes the characteristics of major-motion hydraulic systems with the aim of proposing a novel hybrid serial–parallel heavy-duty forging manipulator. Kinematic and dynamic models of the major-motion mechanism are developed to investigate the control and comply with performance of hydraulic lifting, pitching, and buffering systems. Simulation shows that the three hydraulic systems are coupled in the position and posture control of the clamp. A separate posture control method based on the characteristic of the major-motion mechanism is designed for the hydraulic systems, and the position tracking performance of the hydraulic systems is studied in a stretching process of a plat-tool.

[1]  Feng Gao,et al.  Kinematic Modeling of a Serial–Parallel Forging Manipulator with Application to Heavy-Duty Manipulations# , 2010 .

[2]  Bin Yao,et al.  Accurate Motion Control of Linear Motors With Adaptive Robust Compensation of Nonlinear Electromagnetic Field Effect , 2013, IEEE/ASME Transactions on Mechatronics.

[3]  Jean-Pierre Merlet,et al.  Parallel Robots , 2000 .

[4]  Yong Zhao,et al.  Stabilized multi-domain simulation algorithms and their application in simulation platform for forging manipulator , 2014 .

[5]  K. W. Lilly,et al.  Dynamic simulation and neural network compliance control of an intelligent forging center , 1996, J. Intell. Robotic Syst..

[6]  G. Nakhaie Jazar,et al.  DYNAMIC BEHAVIOR COMPARISON OF PASSIVE HYDRAULIC ENGINE MOUNTS. PART 1: MATHEMATICAL ANALYSIS , 2006 .

[7]  Lung-Wen Tsai,et al.  Robot Analysis and Design: The Mechanics of Serial and Parallel Manipulators , 1999 .

[8]  Young Hoon Moon,et al.  Pass schedule algorithms for hot open die forging , 2002 .

[9]  Huijun Gao,et al.  Finite Frequency $H_{\infty }$ Control for Vehicle Active Suspension Systems , 2011, IEEE Transactions on Control Systems Technology.

[10]  Bin Yao,et al.  Time Optimal Contouring Control of Industrial Biaxial Gantry: A Highly Efficient Analytical Solution of Trajectory Planning , 2017, IEEE/ASME Transactions on Mechatronics.

[11]  Liang Yan,et al.  High-Accuracy Tracking Control of Hydraulic Rotary Actuators With Modeling Uncertainties , 2014, IEEE/ASME Transactions on Mechatronics.

[12]  Feng Gao,et al.  Compound stiffness modelling of an integrated open-die forging centre with serial–parallel heavy-duty manipulators , 2010 .

[13]  Ya-Jun Pan,et al.  Integrated adaptive robust control for multilateral teleoperation systems under arbitrary time delays , 2016 .

[14]  Yongsheng Zhao,et al.  Analysis of a novel lifting mechanism for forging manipulators , 2015 .

[15]  Zongxia Jiao,et al.  Extended-State-Observer-Based Output Feedback Nonlinear Robust Control of Hydraulic Systems With Backstepping , 2014, IEEE Transactions on Industrial Electronics.

[16]  Guido Herrmann,et al.  Robotic hand posture and compliant grasping control using operational space and integral sliding mode control , 2014, Robotica.

[17]  Hua Zhou,et al.  Model-based trajectory tracking control for an electrohydraulic lifting system with valve compensation strategy , 2012 .

[18]  Huijun Gao,et al.  Vibration Isolation for Active Suspensions With Performance Constraints and Actuator Saturation , 2015, IEEE/ASME Transactions on Mechatronics.

[19]  Feng Gao,et al.  Adaptive compliance control of a hydraulic manipulator in free forging , 2012 .

[20]  Bin Yao,et al.  $\mu$-Synthesis-Based Adaptive Robust Control of Linear Motor Driven Stages With High-Frequency Dynamics: A Case Study , 2015, IEEE/ASME Transactions on Mechatronics.

[21]  Hu Shi,et al.  Compliance of hydraulic system and its applications in thrust system design of shield tunneling machine , 2013 .

[22]  Feng Gao,et al.  Dynamic Stability Analysis of a Novel Forging Manipulator , 2008, ICIRA.

[23]  Feng Gao,et al.  Coordinated kinematic modelling for motion planning of heavy-duty manipulators in an integrated open-die forging centre , 2009 .