Working fluid selection for regenerative supercritical Brayton cycle combined with bottoming ORC driven by molten salt solar power tower using energy–exergy analysis

[1]  Zhibin Yu,et al.  Theoretical analysis of a regenerative supercritical carbon dioxide Brayton cycle/organic Rankine cycle dual loop for waste heat recovery of a diesel/natural gas dual-fuel engine , 2019, Energy Conversion and Management.

[2]  C. Turchi,et al.  Thermal desalination via supercritical CO2 Brayton cycle: Optimal system design and techno-economic analysis without reduction in cycle efficiency , 2019, Applied Thermal Engineering.

[3]  T. Turunen-Saaresti,et al.  Thermodynamic and turbomachinery design analysis of supercritical Brayton cycles for exhaust gas heat recovery , 2019, Energy.

[4]  W. Su,et al.  Preliminary conceptual exploration about performance improvement on supercritical CO2 power system via integrating with different absorption power generation systems , 2018, Energy Conversion and Management.

[5]  L. G. Farshi,et al.  Energy and exergy analysis of an environmentally-friendly hybrid absorption/recompression refrigeration system , 2018 .

[6]  N. Sarunac,et al.  Thermodynamic analysis of simple and regenerative Brayton cycles for the concentrated solar power applications , 2018 .

[7]  A. Chitsaz,et al.  Thermo-economic analysis and optimization of a solar-driven ammonia-water regenerative Rankine cycle and LNG cold energy , 2018 .

[8]  C. Turchi,et al.  Molten salt power towers operating at 600–650 °C: Salt selection and cost benefits , 2018 .

[9]  Peiwen Li,et al.  A systematic comparison of different S-CO2 Brayton cycle layouts based on multi-objective optimization for applications in solar power tower plants , 2018 .

[10]  A. Veeraragavan,et al.  Comparison of direct and indirect natural draft dry cooling tower cooling of the sCO2 Brayton cycle for concentrated solar power plants , 2018 .

[11]  Sung Ho Park,et al.  Thermodynamic and economic investigation of coal-fired power plant combined with various supercritical CO2 Brayton power cycle , 2018 .

[12]  Chun-wei Gu,et al.  Performance analysis and parametric optimization of supercritical carbon dioxide (S-CO2) cycle with bottoming Organic Rankine Cycle (ORC) , 2018 .

[13]  Kun Wang,et al.  Thermodynamic analysis and comparison for different direct-heated supercritical CO2 Brayton cycles integrated into a solar thermal power tower system , 2017 .

[14]  Seungjoon Baik,et al.  Thermodynamic study of supercritical CO2 Brayton cycle using an isothermal compressor , 2017 .

[15]  Ya-Ling He,et al.  Multi-objective optimization of the aiming strategy for the solar power tower with a cavity receiver by using the non-dominated sorting genetic algorithm , 2017 .

[16]  Mohamed A. Sharaf Eldean,et al.  Performance analysis of different working gases for concentrated solar gas engines: Stirling & Brayton , 2017 .

[17]  Marco Astolfi,et al.  Preliminary assessment of sCO2 cycles for power generation in CSP solar tower plants , 2017 .

[18]  Anestis I. Kalfas,et al.  Recuperators investigation for high temperature supercritical carbon dioxide power generation cycles , 2017 .

[19]  Jun Li,et al.  Energy, exergy and exergoeconomic analyses of a combined supercritical CO2 recompression Brayton/absorption refrigeration cycle , 2017 .

[20]  C. Ho.  Advances in central receivers for concentrating solar applications , 2017 .

[21]  J. Martínez-Val,et al.  New text comparison between CO2 and other supercritical working fluids (ethane, Xe, CH4 and N2) in line- focusing solar power plants coupled to supercritical Brayton power cycles , 2017 .

[22]  Javier Muñoz-Antón,et al.  Dual Loop line-focusing solar power plants with supercritical Brayton power cycles , 2017 .

[23]  Praveen D. Malali,et al.  Performance optimization of a regenerative Brayton heat engine coupled with a parabolic dish solar collector , 2017 .

[24]  Ya-Ling He,et al.  Integration between supercritical CO2 Brayton cycles and molten salt solar power towers: A review and a comprehensive comparison of different cycle layouts , 2017 .

[25]  Meihong Wang,et al.  Thermodynamic analysis and preliminary design of closed Brayton cycle using nitrogen as working fluid and coupled to small modular Sodium-cooled fast reactor (SM-SFR) , 2017 .

[26]  Zhenping Feng,et al.  Study on performances of supercritical CO2 recompression Brayton cycles with multi-objective optimization , 2017 .

[27]  Kun Wang,et al.  Thermodynamic analysis and optimization of a molten salt solar power tower integrated with a recompression supercritical CO2 Brayton cycle based on integrated modeling , 2017 .

[28]  N. S. Suresh,et al.  Preliminary design of heliostat field and performance analysis of solar tower plants with thermal storage and hybridisation , 2017 .

[29]  Fahad A. Al-Sulaiman,et al.  Energy and exergy analyses of solar tower power plant driven supercritical carbon dioxide recompression cycles for six different locations , 2017 .

[30]  M. Rosen,et al.  Introducing and analysis of a hybrid molten carbonate fuel cell-supercritical carbon dioxide Brayton cycle system , 2016 .

[31]  Fahad A. Al-Sulaiman,et al.  On the auxiliary boiler sizing assessment for solar driven supercritical CO2 double recompression Brayton cycles , 2016 .

[32]  V. Zare,et al.  Energy and exergy analysis of a closed Brayton cycle-based combined cycle for solar power tower plants , 2016 .

[33]  Mortaza Yari,et al.  Exergoeconomic evaluation and optimization of a novel combined augmented Kalina cycle/gas turbine-modular helium reactor , 2016 .

[34]  Mohamed Gadalla,et al.  Thermo-economic and comparative analyses of two recently proposed optimization approaches for circular heliostat fields: Campo radial-staggered and biomimetic spiral , 2016 .

[35]  S. Saeed Mostafavi Tehrani,et al.  Off-design simulation and performance of molten salt cavity receivers in solar tower plants under realistic operational modes and control strategies , 2016 .

[36]  N. C. Thirumalai,et al.  A novel approach to determine the non-dimensional heliostat field boundary for solar tower plants , 2016 .

[37]  M. A. Reyes-Belmonte,et al.  Optimization of a recompression supercritical carbon dioxide cycle for an innovative central receiver solar power plant , 2016 .

[38]  Soteris A. Kalogirou,et al.  Exergy analysis of solar thermal collectors and processes , 2016 .

[39]  Ibrahim Dincer,et al.  Design and analysis of a solar tower based integrated system using high temperature electrolyzer for hydrogen production , 2016 .

[40]  Robbie McNaughton,et al.  Thermodynamic feasibility of alternative supercritical CO2 Brayton cycles integrated with an ejector , 2016 .

[41]  José María Martínez-Val Peñalosa,et al.  S-Ethane Brayton Power Conversion Systems for Concentrated Solar Power Plant , 2016 .

[42]  Fahad A. Al-Sulaiman,et al.  Performance comparison of different supercritical carbon dioxide Brayton cycles integrated with a solar power tower , 2015 .

[43]  Mortaza Yari,et al.  On the exergoeconomic assessment of employing Kalina cycle for GT-MHR waste heat utilization , 2015 .

[44]  Andrea Lazzaretto,et al.  Innovative biomass to power conversion systems based on cascaded supercritical CO2 Brayton cycles , 2014 .

[45]  Marc A. Rosen,et al.  Exergoeconomic assessment and parametric study of a Gas Turbine-Modular Helium Reactor combined with two Organic Rankine Cycles , 2014 .

[46]  Mortaza Yari,et al.  An exergoeconomic investigation of waste heat recovery from the Gas Turbine-Modular Helium Reactor (GT-MHR) employing an ammonia–water power/cooling cycle , 2013 .

[47]  J. Sanz,et al.  Design and analysis of helium Brayton power cycles for HiPER reactor , 2013 .

[48]  Abdallah Khellaf,et al.  A review of studies on central receiver solar thermal power plants , 2013 .

[49]  Mortaza Yari,et al.  Thermodynamic analysis of employing ejector and organic Rankine cycles for GT-MHR waste heat utilization: A comparative study , 2013 .

[50]  Mortaza Yari,et al.  Ammonia–water cogeneration cycle for utilizing waste heat from the GT-MHR plant , 2012 .

[51]  Mortaza Yari,et al.  Proposal and analysis of a new combined cogeneration system based on the GT-MHR cycle , 2012 .

[52]  Manuel Torrilhon,et al.  Heliostat field optimization: A new computationally efficient model and biomimetic layout , 2012 .

[53]  Zhifeng Wang,et al.  Energy and exergy analysis of solar power tower plants , 2011 .

[54]  Jahar Sarkar,et al.  Thermodynamic analyses and optimization of a recompression N2O Brayton power cycle , 2010 .

[55]  Chun Chang,et al.  Thermal model and thermodynamic performance of molten salt cavity receiver , 2010 .

[56]  Mortaza Yari,et al.  Utilization of waste heat from GT-MHR for power generation in organic Rankine cycles. , 2010 .

[57]  Jahar Sarkar,et al.  Second law analysis of supercritical CO2 recompression Brayton cycle , 2009 .

[58]  Francisco J. Collado,et al.  Quick evaluation of the annual heliostat field efficiency , 2008 .

[59]  Mohamed S. El-Genk,et al.  Properties of noble gases and binary mixtures for closed Brayton Cycle applications , 2008 .

[60]  M. J. Moran,et al.  Thermal design and optimization , 1995 .

[61]  A. Bejan.  Advanced Engineering Thermodynamics , 1988 .

[62]  E. Feher.  SUPERCRITICAL THERMODYNAMIC POWER CYCLE. , 1967 .

[63]  S. Besarati.  Analysis of Advanced Supercritical Carbon Dioxide Power Cycles for Concentrated Solar Power Applications , 2014 .

[64]  European Research on Concentrated Solar Thermal Energy , 2004 .