Synthesis, characterization, and CO2 capture study of micro-nano carbonaceous composites.

The micro-nano carbonaceous composite activated carbon fiber/carbon nanotube (ACF/CNTs) was obtained by chemical vapor deposition technology with CNTs growth on the substrate ACF, and the composite was further modified by branched polyethyleneimine (PEI). The morphological features of the as-grown ACF/CNTs and PEI-modified samples were analyzed by scanning electron microscopy, transmission electron microscopy, X-ray diffraction, Fourier transform infrared spectroscopy and thermal gravimetric analysis respectively. Physical properties of the samples were recorded by conducting N2 adsorption/desorption at 77K. CO2 capture tests indicated that both the presence of CNTs and PEI increased the CO2 adsorption capacity, due to the unique hollow tubular structure of CNTs and poly amino groups of PEI. The CO2 adsorption capacities of ACF/CNTs and ACF/CNTs-PEI were tested to be 66.2 mg/g and 98.8 mg/g, respectively at 30°C, which were much higher than that of unmodified ACF (42.4 mg/g). Increasing adsorption temperature up to 60°C further promoted the CO2 adsorption capacity of ACF/CNTs-PEI (121.2 mg/g) due to the maximum equilibrium adsorption between the chemical and physical adsorption at this temperature. Cyclic CO2 adsorption tests via thermal desorption proved that ACF/CNTs-PEI had a good regenerability of 96.2%, suggesting this material is a promising CO2 adsorbent for practical applications.

[1]  Timothy D. Burchell,et al.  Passive CO2 removal using a carbon fiber composite molecular sieve , 1996 .

[2]  P. Hemalatha,et al.  Adsorption, regeneration and interaction of CO2 with a polythiophene–carbon mesocomposite , 2011 .

[3]  A. Barron,et al.  Synthesis, characterization, and carbon dioxide adsorption of covalently attached polyethyleneimine-functionalized single-wall carbon nanotubes. , 2008, ACS nano.

[4]  S. Fatemi,et al.  Improving CO2/CH4 adsorptive selectivity of carbon nanotubes by functionalization with nitrogen-containing groups , 2011 .

[5]  J. Shim,et al.  Studies on pore structures and surface functional groups of pitch-based activated carbon fibers. , 2003, Journal of colloid and interface science.

[6]  Ashutosh Sharma,et al.  Preparation of carbon molecular sieves from carbon micro and nanofibers for sequestration of CO2 , 2011 .

[7]  F. Kapteijn,et al.  Adsorption properties of carbon molecular sieves prepared from an activated carbon by pitch pyrolysis , 2005 .

[8]  Shi Su,et al.  CO2 capture by electrothermal swing adsorption with activated carbon fibre materials , 2011 .

[9]  Chungsying Lu,et al.  Capture of CO2 from flue gas via multiwalled carbon nanotubes. , 2009, The Science of the total environment.

[10]  S. Su,et al.  CO2 capture capacities of activated carbon fibre-phenolic resin composites , 2009 .

[11]  Christopher W. Jones,et al.  Adsorbent Materials for Carbon Dioxide Capture from Large Anthropogenic Point Sources , 2010 .

[12]  Chungsying Lu,et al.  Thermodynamics and regeneration studies of CO2 adsorption on multiwalled carbon nanotubes , 2010 .

[13]  Chao-Ming Huang,et al.  Preparation of high-surface-area PAN-based activated carbon by solution-blowing process for CO2 adsorption , 2011 .

[14]  Jiping Jiang,et al.  Adsorption isotherm, kinetic and mechanism studies of some substituted phenols on activated carbon fibers , 2010 .

[15]  D. Sholl,et al.  Adsorption and diffusion of carbon dioxide and nitrogen through single-walled carbon nanotube membranes. , 2006, The Journal of chemical physics.

[16]  Bruce G. Miller,et al.  Novel Polyethylenimine-Modified Mesoporous Molecular Sieve of MCM-41 Type as High-Capacity Adsorbent for CO2 Capture , 2002 .

[17]  J. Kitchin,et al.  CO(2) adsorption on supported molecular amidine systems on activated carbon. , 2010, ChemSusChem.

[18]  S. Deng,et al.  Adsorption equilibrium and kinetics of CO2, CH4, N2O, and NH3 on ordered mesoporous carbon. , 2010, Journal of colloid and interface science.

[19]  Yao Shi,et al.  Adsorption of Low-Concentration Carbon Dioxide on Amine-Modified Carbon Nanotubes at Ambient Temperature , 2012 .

[20]  Colin E. Snape,et al.  CO2 capture using some fly ash-derived carbon materials , 2005 .

[21]  E. Ruckenstein,et al.  Applicability of Dubinin–Astakhov equation to CO2 adsorption on single-walled carbon nanotubes , 2006 .

[22]  Hsunling Bai,et al.  Comparative Study of CO2 Capture by Carbon Nanotubes, Activated Carbons, and Zeolites , 2008 .

[23]  M. Meyyappan,et al.  CO2 adsorption in single-walled carbon nanotubes , 2003 .

[24]  Shuixia Chen,et al.  CO2 capture by polyethylenimine-modified fibrous adsorbent. , 2008, Langmuir : the ACS journal of surfaces and colloids.

[25]  S. Tzeng,et al.  Growth of carbon nanofibers on activated carbon fiber fabrics , 2006 .

[26]  S. Tsang,et al.  Recent advances in CO2 capture and utilization. , 2008, ChemSusChem.

[27]  S. J. Gregg,et al.  Adsorption Surface Area and Porosity , 1967 .

[28]  D. Drikakis,et al.  Filtering carbon dioxide through carbon nanotubes , 2011 .

[29]  W. Daud,et al.  Ammonia modification of activated carbon to enhance carbon dioxide adsorption: Effect of pre-oxidation , 2011 .

[30]  Robert W. Stevens,et al.  CO2 capture by amine-enriched fly ash carbon sorbents , 2004 .