Electrophysiology Meets Printed Electronics: The Beginning of a Beautiful Friendship

Electroencephalography (EEG) and surface electromyography (sEMG) are notoriously cumbersome technologies. A typical setup may involve bulky electrodes, dangling wires, and a large amplifier unit. Adapting these technologies to numerous applications has been accordingly fairly limited. Thanks to the availability of printed electronics, it is now possible to effectively simplify these techniques. Elegant electrode arrays with unprecedented performances can be readily produced, eliminating the need to handle multiple electrodes and wires. Specifically, in this Perspective paper, we focus on the advantages of electrodes printed on soft films as manifested in signal transmission at the electrode-skin interface, electrode-skin stability, and user convenience during electrode placement while achieving prolonged use. Customizing electrode array designs and implementing blind source separation methods can also improve recording resolution, reduce variability between individuals and minimize signal cross-talk between nearby electrodes. Finally, we outline several important applications in the field of neuroscience and how each can benefit from the convergence of electrophysiology and printed electronics.

[1]  Christian Cipriani,et al.  Tattoo Conductive Polymer Nanosheets for Skin‐Contact Applications , 2015, Advanced healthcare materials.

[2]  Yanlin Song,et al.  Fabrication of Transparent Multilayer Circuits by Inkjet Printing , 2016, Advanced materials.

[3]  David Rand,et al.  Temporary-tattoo for long-term high fidelity biopotential recordings , 2016, Scientific Reports.

[4]  Abdulhamit Subasi,et al.  Comparison of decision tree algorithms for EMG signal classification using DWT , 2015, Biomed. Signal Process. Control..

[5]  Aapo Hyvärinen,et al.  Testing the ICA mixing matrix based on inter-subject or inter-session consistency , 2011, NeuroImage.

[6]  Kylie Tucker,et al.  Surface electromyography to study muscle coordination , 2016 .

[7]  Esa Mervaala,et al.  Screen‐printed ambulatory electrode set enables accurate diagnostics of sleep bruxism , 2018, Journal of sleep research.

[8]  V. Sabatini,et al.  Conductive inks based on methacrylate end‐capped poly(3,4‐ethylenedioxythiophene) for printed and flexible electronics , 2017 .

[9]  Seungjin Choi,et al.  Independent Component Analysis , 2009, Handbook of Natural Computing.

[10]  Göran Stemme,et al.  Characterization of micromachined spiked biopotential electrodes , 2002, IEEE Transactions on Biomedical Engineering.

[11]  Rana Fayyaz Ahmad,et al.  Feature extraction and classification for EEG signals using wavelet transform and machine learning techniques , 2015, Australasian Physical & Engineering Sciences in Medicine.

[12]  Dario Farina,et al.  Characterization of Human Motor Units From Surface EMG Decomposition , 2016, Proceedings of the IEEE.

[13]  Begoña Garcia-Zapirain,et al.  EEG artifact removal—state-of-the-art and guidelines , 2015, Journal of neural engineering.

[14]  Wei Liang,et al.  A low-impedance, skin-grabbing, and gel-free EEG electrode , 2012, 2012 Annual International Conference of the IEEE Engineering in Medicine and Biology Society.

[15]  S. Magdassi,et al.  Conductive nanomaterials for printed electronics. , 2014, Small.

[16]  Yonggang Huang,et al.  Multifunctional Epidermal Electronics Printed Directly Onto the Skin , 2013, Advanced materials.

[17]  Esa Mervaala,et al.  Screen-printed EEG electrode set for emergency use , 2014 .

[18]  D. Farina,et al.  Multi-channel intramuscular and surface EMG decomposition by convolutive blind source separation , 2016, Journal of neural engineering.

[19]  Bao-Liang Lu,et al.  Emotional state classification from EEG data using machine learning approach , 2014, Neurocomputing.

[20]  G. S. Golden,et al.  Tics and Tourette syndrome. , 1979, Hospital practice.

[21]  Chin-Teng Lin,et al.  Design, Fabrication and Experimental Validation of a Novel Dry-Contact Sensor for Measuring Electroencephalography Signals without Skin Preparation , 2011, Sensors.

[22]  Alessandro Chiolerio,et al.  Inkjet printed flexible electrodes for surface electromyography , 2015 .

[23]  Raeed H. Chowdhury,et al.  Epidermal Electronics , 2011, Science.

[24]  Marco Gazzoni.  Low cost inkjet printing for the fast prototyping of surface EMG detection systems , 2015, 2015 IEEE International Symposium on Medical Measurements and Applications (MeMeA) Proceedings.

[25]  Jens Haueisen,et al.  Comparison of three types of dry electrodes for electroencephalography , 2014 .

[26]  S. Luck,et al.  The effects of electrode impedance on data quality and statistical significance in ERP recordings. , 2010, Psychophysiology.

[27]  T. Paparrigopoulos,et al.  REM sleep behaviour disorder: Clinical profiles and pathophysiology , 2005, International review of psychiatry.

[28]  Esa Mervaala,et al.  Novel screen printed electrode set for routine EEG recordings in patients with altered mental status , 2013, 2013 35th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC).

[29]  Gazzoni Marco.  Low cost inkjet printing for the fast prototyping of surface EMG detection systems , 2015 .

[30]  Ronald B Postuma,et al.  Prodromal Parkinson's disease--using REM sleep behavior disorder as a window. , 2014, Parkinsonism & related disorders.

[31]  Keum Shik Hong,et al.  Hybrid EEG–fNIRS-Based Eight-Command Decoding for BCI: Application to Quadcopter Control , 2017, Front. Neurorobot..

[32]  D. Grandjean,et al.  Does Facial Amimia Impact the Recognition of Facial Emotions? An EMG Study in Parkinson’s Disease , 2016, PloS one.

[33]  J. Heckman,et al.  Electrodiagnosis in diseases of nerve and muscle. , 1984, Orthopedics.

[34]  Jacques Montplaisir,et al.  Rapid eye movement sleep behavior disorder as a biomarker for neurodegeneration: the past 10 years. , 2013, Sleep medicine.

[35]  Christian Cipriani,et al.  Ultraconformable Temporary Tattoo Electrodes for Electrophysiology , 2018, Advanced science.

[36]  R Merletti,et al.  A new method to assess skin treatments for lowering the impedance and noise of individual gelled Ag-AgCl electrodes. , 2014, Physiological measurement.

[37]  N D Robinson,et al.  Organic materials for printed electronics. , 2007, Nature materials.

[38]  Tobias Rödlmeier,et al.  Printed facial skin electrodes as sensors of emotional affect , 2018, Flexible and Printed Electronics.

[39]  Xingyu Wang,et al.  Sparse Bayesian Classification of EEG for Brain–Computer Interface , 2016, IEEE Transactions on Neural Networks and Learning Systems.

[40]  Alfredo Berardelli,et al.  Altered Kinematics of Facial Emotion Expression and Emotion Recognition Deficits Are Unrelated in Parkinson’s Disease , 2016, Frontiers in neurology.

[41]  Mamun Bin Ibne Reaz,et al.  Surface Electromyography Signal Processing and Classification Techniques , 2013, Sensors.

[42]  David Rand,et al.  Wireless electronic-tattoo for long-term high fidelity facial muscle recordings , 2017, Defense + Security.

[43]  Chang-Hwan Im,et al.  EEG-Based Brain-Computer Interfaces: A Thorough Literature Survey , 2013, Int. J. Hum. Comput. Interact..

[44]  Tse Nga Ng,et al.  Stretchable Dry Electrodes with Concentric Ring Geometry for Enhancing Spatial Resolution in Electrophysiology , 2017, Advanced healthcare materials.

[45]  David Rand,et al.  A Wearable High-Resolution Facial Electromyography for Long Term Recordings in Freely Behaving Humans , 2018, Scientific Reports.

[46]  James J. S. Norton,et al.  Materials and Optimized Designs for Human‐Machine Interfaces Via Epidermal Electronics , 2013, Advanced materials.

[47]  L. Kirkup,et al.  A direct comparison of wet, dry and insulating bioelectric recording electrodes. , 2000, Physiological measurement.

[48]  Mikhail Kuznetsov,et al.  Filtering the surface EMG signal: Movement artifact and baseline noise contamination. , 2010, Journal of biomechanics.

[49]  Ganesh R. Naik,et al.  Principal Component Analysis Applied to Surface Electromyography: A Comprehensive Review , 2016, IEEE Access.

[50]  Peter Enoksson,et al.  Micromachined electrodes for biopotential measurements , 2001 .

[51]  S. Debener,et al.  Unobtrusive ambulatory EEG using a smartphone and flexible printed electrodes around the ear , 2015, Scientific Reports.

[52]  John A. Rogers,et al.  Epidermal Electronic Systems for Measuring the Thermal Properties of Human Skin at Depths of up to Several Millimeters , 2018, Advanced Functional Materials.

[53]  Dario Farina,et al.  Blind separation of linear instantaneous mixtures of nonstationary surface myoelectric signals , 2004, IEEE Transactions on Biomedical Engineering.

[54]  Alexander Münchau,et al.  Tics as a model of over‐learned behavior—imitation and inhibition of facial tics , 2016, Movement disorders : official journal of the Movement Disorder Society.

[55]  Marimuthu Palaniswami,et al.  Addressing source separation and identification issues in surface EMG using blind source separation , 2008, 2008 30th Annual International Conference of the IEEE Engineering in Medicine and Biology Society.

[56]  Daniel Sánchez Morillo,et al.  Dry EEG Electrodes , 2014, Sensors.

[57]  T. Someya,et al.  Printable elastic conductors by in situ formation of silver nanoparticles from silver flakes. , 2017, Nature materials.

[58]  Yonggang Huang,et al.  Ultrathin conformal devices for precise and continuous thermal characterization of human skin. , 2013, Nature materials.

[59]  Esa Mervaala,et al.  New disposable forehead electrode set with excellent signal quality and imaging compatibility , 2013, Journal of Neuroscience Methods.

[60]  David Rand,et al.  Home monitoring of sleep with a temporary-tattoo EEG, EOG and EMG electrode array: a feasibility study , 2019, Journal of neural engineering.