A non-intrusive approach for proper orthogonal decomposition modal coefficients reconstruction through active subspaces

Reduced order modeling (ROM) provides an efficient framework to compute solutions of parametric problems. Basically, it exploits a set of precomputed high-fidelity solutions --- computed for properly chosen parameters, using a full-order model --- in order to find the low dimensional space that contains the solution manifold. Using this space, an approximation of the numerical solution for new parameters can be computed in real-time response scenario, thanks to the reduced dimensionality of the problem. In a ROM framework, the most expensive part from the computational viewpoint is the calculation of the numerical solutions using the full-order model. Of course, the number of collected solutions is strictly related to the accuracy of the reduced order model. In this work, we aim at increasing the precision of the model also for few input solutions by coupling the proper orthogonal decomposition with interpolation (PODI) --- a data-driven reduced order method --- with the active subspace (AS) property, an emerging tool for reduction in parameter space. The enhanced ROM results in a reduced number of input solutions to reach the desired accuracy. In this contribution, we present the numerical results obtained by applying this method to a structural problem and in a fluid dynamics one.

[1]  P ? ? ? ? ? ? ? % ? ? ? ? , 1991 .

[2]  Johan Larsson,et al.  Exploiting active subspaces to quantify uncertainty in the numerical simulation of the HyShot II scramjet , 2014, J. Comput. Phys..

[3]  J. Hesthaven,et al.  Certified Reduced Basis Methods for Parametrized Partial Differential Equations , 2015 .

[4]  Gianluigi Rozza,et al.  Reduced Order Isogeometric Analysis Approach for PDEs in Parametrized Domains , 2020 .

[5]  Michele Conti,et al.  A nonintrusive proper generalized decomposition scheme with application in biomechanics , 2018 .

[6]  Allan Pinkus.  Approximating by Ridge Functions , 1997 .

[7]  Martin D. Buhmann,et al.  Radial Basis Functions: Theory and Implementations: Preface , 2003 .

[8]  G. Rozza,et al.  POD-Galerkin method for finite volume approximation of Navier–Stokes and RANS equations , 2016 .

[9]  Thomas W. Sederberg,et al.  Free-form deformation of solid geometric models , 1986, SIGGRAPH.

[10]  T. Franz,et al.  Reduced-order models for aerodynamic applications, loads and MDO , 2018 .

[11]  Gianluigi Rozza,et al.  Shape Optimization by means of Proper Orthogonal Decomposition and Dynamic Mode Decomposition , 2018, 1803.07368.

[12]  Paul G. Constantine,et al.  Active Subspaces - Emerging Ideas for Dimension Reduction in Parameter Studies , 2015, SIAM spotlights.

[13]  Ron Kohavi,et al.  A Study of Cross-Validation and Bootstrap for Accuracy Estimation and Model Selection , 1995, IJCAI.

[14]  Hrvoje Jasak,et al.  A tensorial approach to computational continuum mechanics using object-oriented techniques , 1998 .

[15]  G. Rozza,et al.  Combined Parameter and Model Reduction of Cardiovascular Problems by Means of Active Subspaces and POD-Galerkin Methods , 2017, 1711.10884.

[16]  Valentina Dolci,et al.  Proper Orthogonal Decomposition as Surrogate Model for Aerodynamic Optimization , 2016 .

[17]  Juan J. Alonso,et al.  Active Subspaces for Shape Optimization , 2014 .

[18]  Gianluigi Rozza,et al.  An efficient shape parametrisation by free-form deformation enhanced by active subspace for hull hydrodynamic ship design problems in open source environment , 2018, 1801.06369.

[19]  Gianluigi Rozza,et al.  Advances in geometrical parametrization and reduced order models and methods for computational fluid dynamics problems in applied sciences and engineering: overview and perspectives , 2016 .

[20]  Steven L. Brunton,et al.  Data-Driven Science and Engineering , 2019 .

[21]  Gianluigi Rozza,et al.  Dimension reduction in heterogeneous parametric spaces with application to naval engineering shape design problems , 2017, Advanced Modeling and Simulation in Engineering Sciences.

[22]  D. Shepard.  A two-dimensional interpolation function for irregularly-spaced data , 1968, ACM National Conference.

[23]  Gianluigi Rozza,et al.  A reduced order variational multiscale approach for turbulent flows , 2018, Advances in Computational Mathematics.

[24]  Gianluigi Rozza,et al.  Supremizer stabilization of POD–Galerkin approximation of parametrized steady incompressible Navier–Stokes equations , 2015 .

[25]  G. Rozza,et al.  An integrated data-driven computational pipeline with model order reduction for industrial and applied mathematics , 2018, 1810.12364.

[26]  Gianluigi Rozza,et al.  Efficient Reduction in Shape Parameter Space Dimension for Ship Propeller Blade Design , 2019, ArXiv.

[27]  P. Sagaut,et al.  Calibrated reduced-order POD-Galerkin system for fluid flow modelling , 2005 .

[28]  Gianluigi Rozza,et al.  Shape optimization through proper orthogonal decomposition with interpolation and dynamic mode decomposition enhanced by active subspaces , 2019, 1905.05483.

[29]  A. Quarteroni,et al.  Reduced Basis Methods for Partial Differential Equations: An Introduction , 2015 .

[30]  Simona Perotto,et al.  A POD‐selective inverse distance weighting method for fast parametrized shape morphing , 2017, International Journal for Numerical Methods in Engineering.

[31]  P. Cochat,et al.  Et al , 2008, Archives de pediatrie : organe officiel de la Societe francaise de pediatrie.

[32]  Gianluigi Rozza,et al.  Efficient geometrical parametrisation techniques of interfaces for reduced-order modelling: application to fluid–structure interaction coupling problems , 2014 .

[33]  克寛 北嶋,et al.  ガウス関数に基づくFree-Form Deformation , 1999 .

[34]  G. Rozza,et al.  Free-form deformation, mesh morphing and reduced-order methods: enablers for efficient aerodynamic shape optimisation , 2018, International Journal of Computational Fluid Dynamics.

[35]  G. Rozza,et al.  Finite volume POD-Galerkin stabilised reduced order methods for the parametrised incompressible Navier–Stokes equations , 2017, Computers & Fluids.

[36]  Qiqi Wang,et al.  Erratum: Active Subspace Methods in Theory and Practice: Applications to Kriging Surfaces , 2013, SIAM J. Sci. Comput..

[37]  K. Willcox,et al.  Aerodynamic Data Reconstruction and Inverse Design Using Proper Orthogonal Decomposition , 2004 .

[38]  Gianluigi Rozza,et al.  Free Form Deformation Techniques Applied to 3D Shape Optimization Problems , 2013 .

[39]  Gianluigi Rozza,et al.  EZyRB: Easy Reduced Basis method , 2018, J. Open Source Softw..

[40]  Gianluigi Rozza,et al.  Advances in reduced order methods for parametric industrial problems in computational fluid dynamics , 2018, 1811.08319.

[41]  Gianluigi Rozza,et al.  A complete data-driven framework for the efficient solution of parametric shape design and optimisation in naval engineering problems. , 2019, 1905.05982.

[42]  Gianluigi Rozza,et al.  Model Order Reduction by means of Active Subspaces and Dynamic Mode Decomposition for Parametric Hull Shape Design Hydrodynamics , 2018, 1803.07377.

[43]  Karen Willcox,et al.  Proper orthogonal decomposition extensions for parametric applications in compressible aerodynamics , 2003 .

[44]  Gianluigi Rozza,et al.  A reduced basis approach for PDEs on parametrized geometries based on the shifted boundary finite element method and application to a Stokes flow , 2018, Computer Methods in Applied Mechanics and Engineering.