A shear-lag model for a broken fiber embedded in a composite with a ductile matrix

A shear-lag model has been developed for the prediction of stress recovery in a broken fiber embedded in a ductile-matrix composite. The model builds on the original shear-lag model of (Cox HL. Br J Appl Phys 1952;3:72‐9) by introducing plasticity constitutive behavior into the matrix. The matrix is assumed to be an elastic/perfectly-plastic material that deforms according to J2 flow theory. The use of a flow rule to govern the matrix deformation in this model diAers from previous attempts to represent plasticity in the matrix. A non-linear partial diAerential equation is obtained from the model. Numerical solutions to the equation are obtained and compared to simpler shear-lag models which assume sliding at the fiber/matrix interface controlled by a uniform shear stress. Axisymmetric finite-element calculations were done to assess the validity of the shear-lag model. It proves to be in good agreement with the finite-element analysis. Predictions of the shear-lag calculations suggest that the global load-sharing (GLS) strength model of (Curtin WA. J Am Ceram Soc 1991;74:2837‐45) is valid for a composite with a yielding matrix that is elastically rigid. # 1999 Elsevier Science Ltd. All rights reserved.

[1]  R. McMeeking,et al.  Creep models for metal matrix composites with long brittle fibers , 1995 .

[2]  H. L. Cox.  The elasticity and strength of paper and other fibrous materials , 1952 .

[3]  F. Jones,et al.  The effect of matrix plasticity on the stress fields in a single filament composite and the value of interfacial shear strength obtained from the fragmentation test , 1996, Proceedings of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences.

[4]  A. Evans,et al.  THE ULTIMATE TENSILE STRENGTH OF METAL AND CERAMIC-MATRIX COMPOSITES , 1993 .

[5]  A. Kelly,et al.  Tensile properties of fibre-reinforced metals: Copper/tungsten and copper/molybdenum , 1965 .

[6]  M. Wisnom,et al.  Stress Concentration Factors Around a Broken Fibre in a Unidirectional Carbon Fibre Reinforced Epoxy , 1994 .

[7]  S. Leigh Phoenix,et al.  Stress concentrations around multiple fiber breaks in an elastic matrix with local yielding or debonding using quadratic influence superposition , 1996 .

[8]  William A. Curtin,et al.  THEORY OF MECHANICAL-PROPERTIES OF CERAMIC-MATRIX COMPOSITES , 1991 .

[9]  John M. Hedgepeth,et al.  Local Stress Concentrations in Imperfect Filamentary Composite Materials , 1967 .

[10]  R. Hill.  The mathematical theory of plasticity , 1950 .

[11]  R. McMeeking,et al.  Control of strength anisotropy of metal matrix fiber composites , 1994 .

[12]  Chad M. Landis,et al.  Stress concentrations in composites with interface sliding, matrix stiffness and uneven fiber spacing using shear lag theory , 1999 .