Application of Vias as Functional Elements in Microwave Coupling Structures

A novel application of vertical interconnects (vias) in multilayer structures, such as printed circuit boards (PCBs), is presented. By carefully designing the electromagnetic via environment, it is shown that a pair of signal vias can be used as a building block for microwave couplers. Due to the inductive nature of the coupling, the coupled port is the far end. Coupling of -0.1 dB and directivities beyond 20 dB in the frequency range from 10 to 20 GHz can be achieved. The coupling mechanisms in PCBs are investigated for different electromagnetic environments and the influence of the geometrical and material parameters on the coupler performance is explored. Results are validated by full-wave simulations and S-parameter measurements.

[1]  Raj Mittra,et al.  FDTD modeling of noise in computer packages , 1993, Proceedings 1993 IEEE Multi-Chip Module Conference MCMC-93.

[2]  Ke Wu,et al.  Accurate modeling, wave mechanisms, and design considerations of a substrate integrated waveguide , 2006, IEEE Transactions on Microwave Theory and Techniques.

[3]  Yoshitaka Toyota,et al.  Analysis of resonance characteristics of a power bus with rectangle and triangle elements in multilayer PCBs , 2003, Asia-Pacific Conference on Environmental Electromagnetics, 2003. CEEM 2003. Proceedings..

[4]  大越 孝敬.  Planar circuits for microwaves and lightwaves , 1985 .

[5]  W. Fichtner,et al.  Parasitic modes on printed circuit boards and their effects on EMC and signal integrity , 2001 .

[6]  Jun Fan,et al.  Physics-Based Via and Trace Models for Efficient Link Simulation on Multilayer Structures Up to 40 GHz , 2009, IEEE Transactions on Microwave Theory and Techniques.

[7]  Jun Fan,et al.  Equivalent transmission-line model for vias connected to striplines in multilayer print circuit boards , 2010, 2010 IEEE International Symposium on Electromagnetic Compatibility.

[8]  L. Cornock,et al.  Modeling & Measurement of Mutual Coupling Resulting from via Structures Within Printed Circuit Boards , 2007, 2007 IEEE International Symposium on Electromagnetic Compatibility.

[9]  Jin Au Kong,et al.  Coupled noise analysis for adjacent vias in multilayered digital circuits , 1994 .

[10]  James L. Drewniak,et al.  EMC ’ 09 / Kyoto Equivalent Characteristic Impedance and Propagation Constant for Multi-Layer Via Structures , 2009 .

[11]  D. Pozar.  Microwave Engineering , 1990 .

[12]  Tingdong Zhou,et al.  High-speed interconnect and packaging design of the IBM System z9 processor cage , 2007, IBM J. Res. Dev..

[13]  Jun Fan,et al.  An Intrinsic Circuit Model for Multiple Vias in an Irregular Plate Pair Through Rigorous Electromagnetic Analysis , 2010, IEEE Transactions on Microwave Theory and Techniques.

[14]  Radial transmission lines , 1988 .

[15]  H. Tohya,et al.  Resonance stub effect in a transition from a through via hole to a stripline in multilayer PCBs , 2003, IEEE Microwave and Wireless Components Letters.

[16]  Jun Fan,et al.  Frequency-dependent via inductances for accurate power distribution network modeling , 2009, 2009 IEEE International Symposium on Electromagnetic Compatibility.

[17]  M. Ando,et al.  Single-layer feed waveguide consisting of posts for plane TEM wave excitation in parallel plates , 1998 .

[18]  J. J. Parker.  Via coupling within parallel rectangular planes , 1997 .

[19]  Jun Fan,et al.  Accuracy of Physics-Based Via Models for Simulation of Dense Via Arrays , 2012, IEEE Transactions on Electromagnetic Compatibility.

[20]  X. Duan,et al.  Circular Ports in Parallel-Plate Waveguide Analysis With Isotropic Excitations , 2012, IEEE Transactions on Electromagnetic Compatibility.

[21]  Jun Fan,et al.  Equivalent mixed-mode characteristic impedances for differential signal vias , 2009, 2009 IEEE International Symposium on Electromagnetic Compatibility.

[22]  C. Schuster,et al.  Double stub matching in multilayered printed circuit board using vias , 2012, 2012 IEEE 62nd Electronic Components and Technology Conference.

[23]  Barry K. Gilbert,et al.  Wave model solution to the ground/power plane noise problem , 1995 .

[24]  C. Schuster,et al.  DesignCon 2006 Developing a “ Physical ” Model for Vias , 2005 .

[25]  Jun Fan,et al.  Physics-Based Inductance Extraction for Via Arrays in Parallel Planes for Power Distribution Network Design , 2010, IEEE Transactions on Microwave Theory and Techniques.

[26]  Arne F. Jacob,et al.  Novel LTCC/BGA Modules for Highly Integrated , 2003 .