In-reactor creep of zircaloy-2, zircaloy-4 and Zr-1.15 wt % Cr-0.1 wt % Fe at 568 K derived from their stress-relaxation behaviour

[1]  R. Holt.  The effect of metallurgical condition and irradiation on strength and ductility of Zr-1.14% Cr-0.1% Fe , 1974 .

[2]  H. Brager,et al.  Frank loop development in neutron-irradiated cold-worked type 316 stainless steel☆ , 1973 .

[3]  P. A. Ross-Ross,et al.  The relation between stress-relaxation and creep for some zirconium alloys during neutron irradiation , 1973 .

[4]  V. Fidleris.  The effect of cold-work and stress-relieving on the irradiation growth behaviour of zirconium alloys , 1973 .

[5]  E. F. Ibrahim,et al.  In-reactor tubular creep of Zircaloy-2 at 260 to 300 °C , 1973 .

[6]  A. Brailsford,et al.  Irradiation creep due to the growth of interstitial loops , 1973 .

[7]  R. C. Daniel.  In-Pile Dimensional Changes of Zircaloy-4 Tubing Having Low Hoop Stresses (Light Water Breeder Reactor Development Program) , 1972 .

[8]  P. A. Ross-Ross,et al.  Anisotropic creep behaviour of zirconium alloys in a fast neutron flux , 1972 .

[9]  W. Langford,et al.  Metallurgical properties of heat-treated Zr-2.5 wt% Nb pressure tubes irradiated under power reactor conditions , 1972 .

[10]  R. Wolfe,et al.  Viscoelastic analysis of in-pile stress relaxation , 1972 .

[11]  F. Nichols.  On the mechanisms of irradiation creep in zirconium-base alloys , 1970 .

[12]  P. Kreyns,et al.  Radiation-enhanced relaxation in Zircaloy-4 and Zr/2.5 wt % Nb/0.5 wt % Cu alloys , 1968 .

[13]  P. A. Ross-Ross,et al.  The in-reactor creep of cold-worked Zircaloy-2 and Zirconium-2.5 wt % niobium pressure tubes , 1968 .

[14]  V. Fidleris.  UNIAXIAL IN-REACTOR CREEP OF ZIRCONIUM ALLOYS. , 1968 .