A Novel Voltage Injection Based Offline Parameters Identification for Current Controller Auto Tuning in SPMSM Drives

This paper presents a comprehensive study on a novel voltage injection based offline parameter identification method for surface mounted permanent magnet synchronous motors (SPMSMs). It gives solutions to obtain stator resistance, d- and q-axes inductances, and permanent magnet (PM) flux linkage that are totally independent of current and speed controllers, and it is able to track variations in q-axis inductance caused by magnetic saturation. With the proposed voltage amplitude selection strategies, a closed-loop-like current and speed control is achieved throughout the identification process. It provides a marked difference compared with the existing methods that are based on open-loop voltage injection and renders a more simplified and industry-friendly solution compared with methods that rely on controllers. Inverter nonlinearity effect compensation is not required because its voltage error is removed by enabling the motor to function at a designed routine. The proposed method is validated through two SPMSMs with different power rates. It shows that the required parameters can be accurately identified and the proportional-integral current controller auto-tuning is achieved only with very limited motor data such as rated current and number of pole pairs.

[1]  Narayan C. Kar,et al.  Improved High-Frequency Voltage Injection Based Permanent Magnet Temperature Estimation for PMSM Condition Monitoring for EV Applications , 2018, IEEE Transactions on Vehicular Technology.

[2]  Sandro Calligaro,et al.  Self-Commissioning of Inverter Dead-Time Compensation by Multiple Linear Regression Based on a Physical Model , 2015, IEEE Transactions on Industry Applications.

[3]  Ming Yang,et al.  Flux Immunity Robust Predictive Current Control With Incremental Model and Extended State Observer for PMSM Drive , 2017, IEEE Transactions on Power Electronics.

[4]  Abbas Shoulaie,et al.  Accurate Modeling of the Nonlinear Characteristic of a Voltage Source Inverter for Better Performance in Near Zero Currents , 2019, IEEE Transactions on Industrial Electronics.

[5]  Jianjun Hu,et al.  Study on Electromechanical Coupling Characteristics of an Integrated Electric Drive System for Electric Vehicle , 2019, IEEE Access.

[6]  Kan Liu,et al.  Identification of Flux Linkage Map of Permanent Magnet Synchronous Machines Under Uncertain Circuit Resistance and Inverter Nonlinearity , 2018, IEEE Transactions on Industrial Informatics.

[7]  Z Q Zhu,et al.  A Novel Method for Compensating Inverter Nonlinearity Effects in Carrier Signal Injection-Based Sensorless Control From Positive-Sequence Carrier Current Distortion , 2011, IEEE Transactions on Industry Applications.

[8]  Sheng-Ming Yang,et al.  Automatic Control Loop Tuning for Permanent-Magnet AC Servo Motor Drives , 2016, IEEE Transactions on Industrial Electronics.

[9]  Alberto Tenconi,et al.  Identification of the Magnetic Model of Permanent-Magnet Synchronous Machines Using DC-Biased Low-Frequency AC Signal Injection , 2015, IEEE Transactions on Industry Applications.

[10]  Kan Liu,et al.  Online Estimation of the Rotor Flux Linkage and Voltage-Source Inverter Nonlinearity in Permanent Magnet Synchronous Machine Drives , 2014, IEEE Transactions on Power Electronics.

[11]  Hyun-Soo Kim,et al.  Nonlinearity estimation and compensation of PWM VSI for PMSM under resistance and flux linkage uncertainty , 2006, IEEE Transactions on Control Systems Technology.

[12]  Marko Hinkkanen,et al.  Parameter Identification and Self-Commissioning in AC Motor Drives: A Technology Status Review , 2019, IEEE Transactions on Power Electronics.

[13]  K. Lu,et al.  A Fast Estimation of Initial Rotor Position for Low-Speed Free-Running IPMSM , 2020, IEEE Transactions on Power Electronics.

[14]  Chris Gerada,et al.  Self-Commissioning of Interior Permanent- Magnet Synchronous Motor Drives With High-Frequency Current Injection , 2014 .

[15]  G Pellegrino,et al.  Accurate Inverter Error Compensation and Related Self-Commissioning Scheme in Sensorless Induction Motor Drives , 2010, IEEE Transactions on Industry Applications.

[16]  Mauro Zigliotto,et al.  Automatic procedure for induction motor parameter estimation at standstill , 2012 .

[17]  Bilal Akin,et al.  Spatial Inductance Estimation for Current Loop Auto-Tuning in IPMSM Self-Commissioning , 2020, IEEE Transactions on Industrial Electronics.

[18]  Bin Chen,et al.  Magnetizing Curve Identification for Induction Motors at Standstill Without Assumption of Analytical Curve Functions , 2015, IEEE Transactions on Industrial Electronics.

[19]  Jin Xu,et al.  Self-Commissioning of Permanent Magnet Synchronous Machine Drives at Standstill Considering Inverter Nonlinearities , 2014, IEEE Transactions on Power Electronics.

[20]  Jing He,et al.  Robust Fault-Tolerant Predictive Current Control for Permanent Magnet Synchronous Motors Considering Demagnetization Fault , 2018, IEEE Transactions on Industrial Electronics.

[21]  Jing Zhang,et al.  Influence of Nonideal Voltage Measurement on Parameter Estimation in Permanent-Magnet Synchronous Machines , 2012, IEEE Transactions on Industrial Electronics.

[22]  Bruno Allard,et al.  A Comparative Study of Predictive Current Control Schemes for a Permanent-Magnet Synchronous Machine Drive , 2009, IEEE Transactions on Industrial Electronics.

[23]  Fayez F. M. El-Sousy,et al.  Intelligent Optimal Recurrent Wavelet Elman Neural Network Control System for Permanent-Magnet Synchronous Motor Servo Drive , 2013, IEEE Transactions on Industrial Informatics.

[24]  Dianguo Xu,et al.  Offline Parameter Self-Learning Method for General-Purpose PMSM Drives With Estimation Error Compensation , 2019, IEEE Transactions on Power Electronics.