Strengthening Materials by Engineering Coherent Internal Boundaries at the Nanoscale

Strengthening materials traditionally involves the controlled creation of internal defects and boundaries so as to obstruct dislocation motion. Such strategies invariably compromise ductility, the ability of the material to deform, stretch, or change shape permanently without breaking. Here, we outline an approach to optimize strength and ductility by identifying three essential structural characteristics for boundaries: coherency with surrounding matrix, thermal and mechanical stability, and smallest feature size finer than 100 nanometers. We assess current understanding of strengthening and propose a methodology for engineering coherent, nanoscale internal boundaries, specifically those involving nanoscale twin boundaries. Additionally, we discuss perspectives on strengthening and preserving ductility, along with potential applications for improving failure tolerance, electrical conductivity, and resistance to electromigration.

[1]  Subra Suresh,et al.  Nano-sized twins induce high rate sensitivity of flow stress in pure copper , 2005 .

[2]  K. Lu,et al.  Effect of stacking-fault energy on deformation twin thickness in Cu-Al alloys , 2009 .

[3]  K. Lu,et al.  Hardness and strain rate sensitivity of nanocrystalline Cu , 2006 .

[4]  K. Chawla,et al.  Mechanical Behavior of Materials , 1998 .

[5]  J. Bravman,et al.  Thickness dependence of the twin density in YBa2Cu3O7−δ thin films sputtered onto MgO substrates , 1991 .

[6]  K. T. Ramesh,et al.  Effect of nanocrystalline and ultrafine grain sizes on the strain rate sensitivity and activation volume: fcc versus bcc metals , 2004 .

[7]  Hongqi Li,et al.  Tensile behavior of a nanocrystalline Ni–Fe alloy , 2006 .

[8]  Subra Suresh,et al.  Mechanical behavior of nanocrystalline metals and alloys , 2003 .

[9]  Y. Zhu,et al.  Inverse grain-size effect on twinning in nanocrystalline Ni. , 2008, Physical review letters.

[10]  D. Follstaedt,et al.  Hall–Petch relationship in pulsed-laser deposited nickel films , 2004 .

[11]  K. Lu,et al.  Mechanical properties and rolling behaviors of nano-grained copper with embedded nano-twin bundles , 2008 .

[12]  T. Courtney,et al.  Mechanical Behavior of Materials , 1990 .

[13]  Subra Suresh,et al.  Some critical experiments on the strain-rate sensitivity of nanocrystalline nickel , 2003 .

[14]  K. Vecchio,et al.  The influence of stacking fault energy on the mechanical behavior of Cu and Cu-Al alloys: Deformation twinning, work hardening, and dynamic recovery , 2001 .

[15]  S. Suresh,et al.  Mechanistic models for the activation volume and rate sensitivity in metals with nanocrystalline grains and nano-scale twins , 2005 .

[16]  M. Nastasi,et al.  Enhanced hardening in Cu/330 stainless steel multilayers by nanoscale twinning , 2004 .

[17]  Subra Suresh,et al.  Grain size effects on the fatigue response of nanocrystalline metals , 2003 .

[18]  Subra Suresh,et al.  Effects of mechanical properties and surface friction on elasto-plastic sliding contact , 2008 .

[19]  Horst Hahn,et al.  Interactions between non-screw lattice dislocations and coherent twin boundaries in face-centered cubic metals , 2008 .

[20]  P. Sanders,et al.  Fatigue of nanocrystalline copper , 1995 .

[21]  Lih-Juann Chen,et al.  Observation of Atomic Diffusion at Twin-Modified Grain Boundaries in Copper , 2008, Science.

[22]  K. Lu,et al.  Tensile properties of copper with nano-scale twins , 2005 .

[23]  Haiyan Wang,et al.  High-strength sputter-deposited Cu foils with preferred orientation of nanoscale growth twins , 2006 .

[24]  K. Lu,et al.  Microstructural evolution and nanostructure formation in copper during dynamic plastic deformation at cryogenic temperatures , 2008 .

[25]  Yinmin M Wang,et al.  Large-scale production of nano-twinned, ultrafine-grained copper , 2006 .

[26]  Ting Zhu,et al.  Interfacial plasticity governs strain rate sensitivity and ductility in nanostructured metals , 2007, Proceedings of the National Academy of Sciences.

[27]  Hiroyuki Kokawa,et al.  Optimization of grain boundary character distribution for intergranular corrosion resistant 304 stainless steel by twin-induced grain boundary engineering , 2002 .

[28]  Lei Lu,et al.  Ultrahigh Strength and High Electrical Conductivity in Copper , 2004, Science.

[29]  T. Nieh,et al.  The effect of solid solution W additions on the mechanical properties of nanocrystalline Ni , 2003 .

[30]  S. Suresh,et al.  Strength, strain-rate sensitivity and ductility of copper with nanoscale twins , 2006 .