Opportunities of CMOS-MEMS integration through LSI foundry and open facility

Since the 2000s, several countries have established micro- and nanofabrication platforms for the research and education community as national projects. By combining such platforms with VLSI multichip foundry services, various integrated devices, referred to as“CMOS-MEMS”, can be realized without constructing an entire cleanroom. In this paper, we summarize MEMS-last postprocess schemes for CMOS devices on a bulk silicon wafer as well as on a silicon-on-insulator (SOI) wafer using an open-access cleanroom of the Nanotechnology Platform of MEXT Japan. The integration devices presented in this article are free-standing structures and postprocess isolated LSI devices. Postprocess issues are identified with their solutions, such as the reactive ion etching (RIE) lag for dry release and the impact of the deep RIE (DRIE) postprocess on transistor characteristics. Integration with nonsilicon materials is proposed as one of the future directions.

[1]  H. Fujita,et al.  Microactuators and micromachines , 1998, Proc. IEEE.

[2]  Mona E. Zaghloul,et al.  A monolithic CMOS microhotplate-based gas sensor system , 2002 .

[3]  Susumu Sugiyama,et al.  Tactile image detection using a 1k-element silicon pressure sensor array , 1990 .

[4]  H. Seidel,et al.  Novel Technology for Capacitive Pressure Sensors with Monocrystalline Silicon Membranes , 2009, 2009 IEEE 22nd International Conference on Micro Electro Mechanical Systems.

[5]  M. R. Douglass,et al.  A MEMS-based projection display , 1998, Proc. IEEE.

[6]  Susumu Sugiyama,et al.  Integrated piezoresistive pressure sensor with both voltage and frequency output , 1983 .

[7]  Y. Mita,et al.  Silicon sub-micron-gap deep trench Pirani vacuum gauge for operation at atmospheric pressure , 2011 .

[8]  Isabelle Dufour,et al.  Detection of organic vapours with Si cantilevers coated with inorganic (zeolites) or organic (polymer) layers , 2012 .

[9]  Y. Mita,et al.  Deep-Trench Vertical Si Photodiodes for Improved Efficiency and Crosstalk , 2007, IEEE Journal of Selected Topics in Quantum Electronics.

[11]  S. Mintova,et al.  Nanosized zeolite films for vapor-sensing applications , 2001 .

[12]  Yoshio Mita,et al.  “MEMS de Piano”- an experimental course of design, fabrication, and testing of MEMS oscillator , 2014, 10th European Workshop on Microelectronics Education (EWME).

[13]  M. Kubota,et al.  Experimental evaluation of high voltage hold-off capability of post-process mesa-isolated series standard CMOS transistors , 2013, 2013 Transducers & Eurosensors XXVII: The 17th International Conference on Solid-State Sensors, Actuators and Microsystems (TRANSDUCERS & EUROSENSORS XXVII).

[14]  Remco J. Wiegerink,et al.  RIE lag in high aspect ratio trench etching of silicon , 1997 .

[15]  Yoshio Mita,et al.  Characterization of zeolite-trench-embedded microcantilevers with CMOS strain gauge for integrated gas sensor applications , 2016 .

[16]  Ulrike Wallrabe,et al.  Unconventional applications of wire bonding create opportunities for microsystem integration , 2013 .

[17]  Y. Mita,et al.  Polarization-transmissive photovoltaic film device consisting of an Si photodiode wire-grid , 2008 .

[18]  M. Denoual,et al.  Capacitively coupled electrical substitution for resistive bolometer enhancement , 2008 .

[19]  R. Ruther,et al.  A novel micromachining process for the fabrication of monocrystalline Si-membranes using porous silicon , 2003, TRANSDUCERS '03. 12th International Conference on Solid-State Sensors, Actuators and Microsystems. Digest of Technical Papers (Cat. No.03TH8664).

[20]  Eric Lebrasseur,et al.  On-chip High-voltage Silicon Photovoltaic Cell Array Made by a CMOS Post-processed Device Isolation Method for Driving a MEMS Actuator in a Remote Manner , 2016 .

[21]  Christian Vieider,et al.  MEMS-based uncooled infrared bolometer arrays: a review , 2007, SPIE/COS Photonics Asia.

[22]  U. Lampe,et al.  Metal Oxide Sensors , 1995, International Conference on Solid-State Sensors, Actuators and Microsystems.

[23]  Eric Lebrasseur,et al.  A heat balanced sigma–delta uncooled bolometer , 2014 .

[24]  Y. Shimogaki,et al.  Macro/microcavity method and its application in modeling chemical vapor deposition reaction systems , 2000 .

[25]  L. Fadel,et al.  Signal to noise ratio of resonant microcantilever type chemical sensors as a function of resonant frequency and quality factor , 2004 .

[26]  Jungchul Lee,et al.  Differential Scanning Calorimeter Based on Suspended Membrane Single Crystal Silicon Microhotplate , 2008, Journal of Microelectromechanical Systems.

[27]  Yuki Okamoto,et al.  A scalable, optically-driven, high-voltage switch for remote MEMS device operation fabricated with a standard CMOS process , 2017, IEICE Electron. Express.

[28]  Izabela Naydenova,et al.  Progress in zeolite synthesis promotes advanced applications , 2014 .

[29]  Yoshio Mita,et al.  Demonstration of 0–30V comb-drive MEMS actuator by integrated switching circuit with post-mesa-isolated standard 5V CMOS transistors , 2016, 2016 Symposium on Design, Test, Integration and Packaging of MEMS/MOEMS (DTIP).

[30]  James K. Gimzewski,et al.  Thermal analysis using a micromechanical calorimeter , 1996 .

[31]  Stephan Marsch,et al.  Clinical studies: Diagnosing disease by nanomechanical olfactory sensors – system design and clinical validation , 2008 .

[32]  S. Mintova,et al.  Thermal resonant zeolite-based gas sensor , 2017 .

[33]  K.E. Petersen,et al.  Silicon as a mechanical material , 1982, Proceedings of the IEEE.

[34]  Y. Mita,et al.  A strain-sensor-integrated test bed for electro mechanical characterization of VLSI probe , 2015, 2015 Symposium on Design, Test, Integration and Packaging of MEMS/MOEMS (DTIP).

[35]  P. Richards.  Bolometers for infrared and millimeter waves , 1994 .

[36]  James K. Gimzewski,et al.  A chemical sensor based on a microfabricated cantilever array with simultaneous resonance-frequency and bending readout , 2001 .

[37]  A. Hierlemann,et al.  Complementary metal oxide semiconductor cantilever arrays on a single chip: mass-sensitive detection of volatile organic compounds. , 2002, Analytical chemistry.

[38]  F. Marty,et al.  Advanced etching of silicon based on deep reactive ion etching for silicon high aspect ratio microstructures and three-dimensional micro- and nanostructures , 2005, Microelectron. J..

[39]  M. Kubota,et al.  An integrated CMOS-MEMS probe having two-tips per cantilever for individual contact sensing and kelvin measurement with two cantilevers , 2013, 2013 IEEE International Conference on Microelectronic Test Structures (ICMTS).

[40]  Niclas Roxhed,et al.  Integrating MEMS and ICs , 2015 .