Enhanced conductivity behavior of polydimethylsiloxane (PDMS) hybrid composites containing exfoliated graphite nanoplatelets and carbon nanotubes

Abstract Polydimethylsiloxane (PDMS) hybrid composites consisting of exfoliated graphite nanoplatelets (xGnPs) and multiwalled carbon nanotubes functionalized with hydroxyl groups (MWCNTs-OH) were fabricated, and the effects of the xGnP/MWCNT-OH ratio on the thermal, electrical, and mechanical properties of polydimethylsiloxane (PDMS) hybrid composites were investigated. With the total filler content fixed at 4 wt%, a hybrid composite consisting of 75% × GnP/25% MWCNT-OH showed the highest thermal conductivity (0.392 W/m K) and electrical conductivity (1.24 × 10−3 S/m), which significantly exceeded the values shown by either of the respective single filler composites. The increased thermal and electrical conductivity found when both fillers are used in combination is attributed to the synergistic effect between the fillers that forms an interconnected hybrid network. In contrast, the various different combinations of the fillers only showed a modest effect on the mechanical behavior, thermal stability, and thermal expansion of the PDMS composite.

[1]  Weileun Fang,et al.  Static and dynamic mechanical properties of polydimethylsiloxane/carbon nanotube nanocomposites , 2009 .

[2]  L. Drzal,et al.  Electrical and barrier properties of exfoliated graphite nanoplatelet (xGnP) reinforced nanocomposites , 2007 .

[3]  Y. Xing,et al.  Sonochemical oxidation of multiwalled carbon nanotubes. , 2005, Langmuir : the ACS journal of surfaces and colloids.

[4]  M. Mariatti,et al.  Effects of surface-functionalized multi-walled carbon nanotubes on the properties of poly(dimethyl siloxane) nanocomposites , 2010 .

[5]  Chen-Chi M. Ma,et al.  Synergetic effects of graphene platelets and carbon nanotubes on the mechanical and thermal properties of epoxy composites , 2011 .

[6]  L. Drzal,et al.  Improvement of electric conductivity of LLDPE based nanocomposite by paraffin coating on exfoliated graphite nanoplatelets , 2010 .

[7]  Wenbin Zhong,et al.  Mechanical and thermal properties of epoxy nanocomposites reinforced with amino-functionalized multi-walled carbon nanotubes , 2008 .

[8]  S. Hong,et al.  Enhanced electrical conductivity of nanocomposites containing hybrid fillers of carbon nanotubes and carbon black. , 2009, ACS applied materials & interfaces.

[9]  L. Bokobza.  Mechanical, electrical and spectroscopic investigations of carbon nanotube-reinforced elastomers , 2009 .

[10]  Zeng-min Shen,et al.  Study on preparation and properties of carbon nanotubes/rubber composites , 2006 .

[11]  W. Zhong,et al.  Dynamic synergy of graphitic nanoplatelets and multi-walled carbon nanotubes in polyetherimide nanocomposites , 2010, Nanotechnology.

[12]  Jang‐Kyo Kim,et al.  Hybrid nanocomposites containing carbon nanotubes and graphite nanoplatelets , 2008 .

[13]  Sang Eun Shim,et al.  Effect of dispersion state of carbon nanotube on the thermal conductivity of poly(dimethyl siloxane) composites , 2010 .

[14]  L. Drzal,et al.  Multifunctional polypropylene composites produced by incorporation of exfoliated graphite nanoplatelets , 2007 .

[15]  Scott T. Huxtable,et al.  Interfacial heat flow in carbon nanotube suspensions , 2003, Nature materials.

[16]  N. A. Siddiqui,et al.  DISPERSION AND FUNCTIONALIZATION OF CARBON NANOTUBES FOR POLYMER-BASED NANOCOMPOSITES: A REVIEW , 2010 .

[17]  M. Mariatti,et al.  Effect of processing methods and functional groups on the properties of multi-walled carbon nanotube filled poly(dimethyl siloxane) composites , 2012, Polymer Bulletin.

[18]  Marina Saphiannikova,et al.  Modified and unmodified multiwalled carbon nanotubes in high performance solution-styrene-butadiene and butadiene rubber blends , 2008 .