Use of directly molded poly(methyl methacrylate) channels for microfluidic applications.

A direct molding method for creating a homogeneous, polymer microfluidic channel is presented. By utilizing capillary rise and subsequent absorption of poly(methyl methacrylate) (PMMA) solution into a solvent-permeable poly(dimethyl siloxane) (PDMS) mold, various circular or elliptic polymer microchannels were fabricated without channel bonding and additional surface modification processes. In addition, the channel diameter was tunable from several micrometres to several hundreds of micrometres by controlling concentration and initial amount of polymer solution for a given PDMS mold geometry. The molded PMMA channels were used for two applications: blocking absorption of Rhodamine B dye and constructing artificial endothelial cell-cultured capillaries. It was observed that the molded PMMA channels effectively prevented absorption and diffusion of Rhodamine molecules over 5 h time span, demonstrating approximately 40 times higher blocking efficiency as compared to porous PDMS channels. Also, calf pulmonary artery endothelial cells (CPAEs) adhered, spread, and proliferated uniformly within the molded microchannels to form near confluency within 3 days and remained viable at day 6 without notable cell death, suggesting high biocompatibility and possibility for emulating in vivo-like three-dimensional architecture of blood vessels.

[1]  Byeong Kwon Ju,et al.  Fabrication of round channels using the surface tension of PDMS and its application to a 3D serpentine mixer , 2007 .

[2]  Shan-hui Hsu,et al.  Fabrication of PLGA microvessel scaffolds with circular microchannels using soft lithography , 2007 .

[3]  H. E. Canavan,et al.  Plastic microfluidic devices modified with polyelectrolyte multilayers , 2000, Analytical chemistry.

[4]  E. Delamarche,et al.  Microfluidics for Processing Surfaces and Miniaturizing Biological Assays , 2005 .

[5]  J. E. Mark Polymer Data Handbook , 2009 .

[6]  D. Beebe,et al.  PDMS absorption of small molecules and consequences in microfluidic applications. , 2006, Lab on a chip.

[7]  C. Culbertson,et al.  High efficiency micellar electrokinetic chromatography of hydrophobic analytes on poly(dimethylsiloxane) microchips. , 2006, The Analyst.

[8]  Se-Jin Choi,et al.  An ultraviolet-curable mold for sub-100-nm lithography. , 2004, Journal of the American Chemical Society.

[9]  D. Beebe,et al.  Physics and applications of microfluidics in biology. , 2002, Annual review of biomedical engineering.

[10]  R. Mathies,et al.  PMMA/PDMS valves and pumps for disposable microfluidics. , 2009, Lab on a chip.

[11]  F. He,et al.  Direct fabrication of homogeneous microfluidic channels embedded in fused silica using a femtosecond laser. , 2010, Optics letters.

[12]  B. Lin,et al.  A facile "liquid-molding" method to fabricate PDMS microdevices with 3-dimensional channel topography. , 2009, Lab on a chip.

[13]  M. Sheetz,et al.  Local force and geometry sensing regulate cell functions , 2006, Nature Reviews Molecular Cell Biology.

[14]  Gang Chen,et al.  Fabrication of poly(methyl methacrylate) microfluidic chips by atmospheric molding. , 2004, Analytical chemistry.

[15]  K. Suh,et al.  Effects of mold rising angle and polymer concentration in solvent-assisted molding. , 2009, Langmuir : the ACS journal of surfaces and colloids.

[16]  E. Wang,et al.  Ionic liquid‐assisted PDMS microchannel modification for efficiently resolving fluorescent dye and protein adsorption , 2007, Electrophoresis.

[17]  Tomasz Glawdel,et al.  Method for microfluidic whole-chip temperature measurement using thin-film poly(dimethylsiloxane)/rhodamine B. , 2008, Analytical chemistry.

[18]  Kyung-Jin Jang,et al.  Adhesion assays of endothelial cells on nanopatterned surfaces within a microfluidic channel. , 2010, Analytical chemistry.

[19]  Nancy Allbritton,et al.  Surface modification of poly(dimethylsiloxane) microfluidic devices by ultraviolet polymer grafting. , 2002, Analytical chemistry.

[20]  G. Whitesides,et al.  Rapid Prototyping of Microfluidic Systems in Poly(dimethylsiloxane). , 1998, Analytical chemistry.

[21]  R. G. Christensen,et al.  Fabrication of plastic microfluid channels by imprinting methods. , 1997, Analytical chemistry.

[22]  Min Cheol Park,et al.  Capillary Force Lithography: A Versatile Tool for Structured Biomaterials Interface Towards Cell and Tissue Engineering , 2009 .

[23]  Luke P. Lee,et al.  Shrinky-Dink microfluidics: 3D polystyrene chips. , 2008, Lab on a chip.

[24]  Vernella Vickerman,et al.  Design, fabrication and implementation of a novel multi-parameter control microfluidic platform for three-dimensional cell culture and real-time imaging. , 2008, Lab on a chip.

[25]  Kahp Yang Suh,et al.  Cell research with physically modified microfluidic channels: a review. , 2008, Lab on a chip.

[26]  Frédéric Reymond,et al.  Polymer microfluidic chips for electrochemical and biochemical analyses , 2002, Electrophoresis.

[27]  Jin Ho Kim,et al.  Surface modification of poly(dimethylsiloxane) microchannels , 2003, Electrophoresis.

[28]  Hongkai Wu,et al.  Convenient method for modifying poly(dimethylsiloxane) with poly(ethylene glycol) in microfluidics. , 2009, Analytical chemistry.

[29]  Roger D. Kamm,et al.  Non‐Lithographic Wrinkle Nanochannels for Protein Preconcentration , 2008 .

[30]  A. Abate,et al.  Glass coating for PDMS microfluidic channels by sol-gel methods. , 2008, Lab on a chip.

[31]  Qiangfei Xia,et al.  Sub-10 nm self-enclosed self-limited nanofluidic channel arrays. , 2008, Nano letters.

[32]  C. Culbertson,et al.  Sol-gel modified poly(dimethylsiloxane) microfluidic devices with high electroosmotic mobilities and hydrophilic channel wall characteristics. , 2005, Analytical chemistry.

[33]  S. Park,et al.  Fabrication of Hollow Polymeric Microstructures for Shear‐Protecting Cell‐Containers , 2008 .

[34]  Ali Khademhosseini,et al.  Generation of static and dynamic patterned co-cultures using microfabricated parylene-C stencils. , 2007, Lab on a chip.

[35]  Hui Zhao,et al.  Integrated microfluidic chip for endothelial cells culture and analysis exposed to a pulsatile and oscillatory shear stress. , 2009, Lab on a chip.

[36]  Andre Levchenko,et al.  Nanoscale cues regulate the structure and function of macroscopic cardiac tissue constructs , 2009, Proceedings of the National Academy of Sciences.

[37]  Robin H. Liu,et al.  Microfluidic tectonics: a comprehensive construction platform for microfluidic systems. , 2000, Proceedings of the National Academy of Sciences of the United States of America.

[38]  Ali Khademhosseini,et al.  Fabrication of non-biofouling polyethylene glycol micro- and nanochannels by ultraviolet-assisted irreversible sealing. , 2006, Lab on a chip.

[39]  Min Cheol Park,et al.  Soft lithography for microfluidics: a review , 2008 .