Experimental Investigation of Numerically Optimized Wavy Microchannels Created Through Additive Manufacturing

[1]  S. J. Kline,et al.  Describing Uncertainties in Single-Sample Experiments , 1953 .

[2]  R. Webb,et al.  Forced convection heat transfer in helically rib-roughened tubes , 1980 .

[3]  S. Vanka,et al.  Convective heat transfer in periodic wavy passages , 1995 .

[4]  Li Lu,et al.  Direct metal laser sintering for rapid tooling: processing and characterisation of EOS parts , 2001 .

[5]  Han Tong Loh,et al.  An approach to minimize build errors in direct metal laser sintering , 2006, IEEE Transactions on Automation Science and Engineering.

[6]  Pulak M. Pandey,et al.  Statistical modelling and optimization of surface roughness in the selective laser sintering process , 2007 .

[7]  Frédéric Plourde,et al.  Turbulent heat and mass transfer in sinusoidal wavy channels , 2008 .

[8]  Arthur W. Lees,et al.  Heat transfer and pressure drop in furrowed channels with transverse and skewed sinusoidal wavy walls , 2009 .

[9]  Pablo E. Araya,et al.  Heat transfer enhancement by flow bifurcations in asymmetric wavy wall channels , 2009 .

[10]  Tom Verstraete,et al.  Design and Optimization of the Internal Cooling Channels of a High Pressure Turbine Blade—Part II: Optimization , 2010 .

[11]  C. Shu,et al.  Fluid flow and heat transfer in wavy microchannels , 2010 .

[12]  Nobuhide Kasagi,et al.  Optimal Shape Design of Compact Heat Exchangers Based on Adjoint Analysis of Momentum and Heat Transfer , 2010 .

[13]  A. Belegundu,et al.  Optimization Concepts and Applications in Engineering , 2011 .

[14]  Joaquim Ciurana,et al.  Influence of process parameters on part quality and mechanical properties for DMLS and SLM with iron-based materials , 2012 .

[15]  Gerd Witt,et al.  Correlation of Process Parameters and Part Properties in Laser Sintering using Response Surface Modeling , 2012 .

[16]  Abhishek G. Ramgadia,et al.  Numerical study of fully developed flow and heat transfer in a wavy passage , 2013 .

[17]  Josua P. Meyer,et al.  Topology Optimization for an Internal Heat-Conduction Cooling Scheme in a Square Domain for High Heat Flux Applications , 2013 .

[18]  Antony Jameson,et al.  Computational Aerodynamics: Solvers and Shape Optimization , 2013 .

[19]  R. Everson,et al.  Surface roughness analysis, modelling and prediction in selective laser melting , 2013 .

[20]  David A. Boger,et al.  A continuous adjoint approach to design optimization in multiphase flow , 2013 .

[21]  Chiang Juay Teo,et al.  Mixing and Heat Transfer Enhancement in Microchannels Containing Converging-Diverging Passages , 2014 .

[22]  George S. Dulikravich,et al.  Multi-objective Design Optimization of Branching, Multifloor, Counterflow Microheat Exchangers , 2014 .

[23]  Cheng-Zhang Wang,et al.  Application of Adjoint Solver to Optimization of Fin Heat Exchanger , 2015 .

[24]  Zhongran Chi,et al.  Conjugate Heat Transfer Optimization of the Nonuniform Impingement Cooling Structure of a HPT 2nd Stage Vane , 2015 .

[25]  Shaopeng Lu,et al.  Aerodynamic and Heat Transfer Optimization of One Stage Air-Cooled Turbine , 2015 .

[26]  Tom Verstraete,et al.  Adjoint Optimization of an Internal Cooling Channel U-Bend , 2015 .

[27]  Yangsheng Li,et al.  Laser Consolidation: A Novel Additive Manufacturing Process for Making Net-Shape Functional Metallic Components for Gas Turbine Applications , 2015 .

[28]  Ercan M. Dede,et al.  Topology Optimization, Additive Layer Manufacturing, and Experimental Testing of an Air-Cooled Heat Sink , 2015 .

[29]  Francesco Montomoli,et al.  Design for Additive Manufacturing: Internal Channel Optimization , 2016 .

[30]  Patrik Meng,et al.  Reheat Burner Front Panel Produced by Additive Manufacturing Challenges: Strategies and Engine Validation , 2016 .

[31]  Karen A. Thole,et al.  Roughness Effects on Flow and Heat Transfer for Additively Manufactured Channels , 2016 .

[32]  Karen A. Thole,et al.  Build Direction Effects on Additively Manufactured Channels , 2015 .

[33]  Karen A. Thole,et al.  Heat Transfer and Pressure Loss Measurements in Additively Manufactured Wavy Microchannels , 2016 .

[34]  Martin Richardson,et al.  Characterization of Laser Additive Manufacturing-Fabricated Porous Superalloys for Turbine Components , 2017 .

[35]  Karen A. Thole,et al.  Scaling Roughness Effects on Pressure Loss and Heat Transfer of Additively Manufactured Channels , 2017 .